
----------------------------------------------
trial-2354 gprs:nanobts+band-900 ping_idle_ping.py
----------------------------------------------
04:45:22.080475 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
04:45:22.092490 tst            gprs:nanobts+band-900: Using 1 x bts (candidates: 1)
04:45:22.234300 tst                ping_idle_ping.py: using LAC 19161
04:45:22.360900 tst                ping_idle_ping.py: using RAC 36
04:45:22.484436 tst                ping_idle_ping.py: using CellId 19161
04:45:22.608183 tst                ping_idle_ping.py: using BVCI 19162
04:45:22.632321 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
04:45:22.643410 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
04:45:22.654299 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
04:45:22.665448 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
04:45:22.676397 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
04:45:22.687381 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
04:45:22.698883 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
04:45:22.709760 tst            gprs:nanobts+band-900: Using 1 x modem (candidates: 4)
04:45:22.984597 tst             ping_idle_ping.py:24: start network...
04:45:23.107860 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
04:45:23.582304 run         create_hlr_db(pid=26492): Launched
04:45:23.751040 bus                          /gobi_6: Setting Powered False
04:45:24.773637 run         create_hlr_db(pid=26492): Terminated: ok {rc=0}
04:45:25.190460 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26494): Launched
04:45:25.483339 run   osmo-hlr_10.42.42.2(pid=26495): Launched
04:45:25.590470 run              osmo-stp_10.42.42.5: Starting osmo-stp
04:45:26.101442 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26497): Launched
04:45:26.395756 run   osmo-stp_10.42.42.5(pid=26498): Launched
04:45:26.503009 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
04:45:27.015337 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26500): Launched
04:45:27.119866 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
04:45:27.376353 run              patchelf(pid=26501): Launched
04:45:27.549222 run   osmo-stp_10.42.42.5(pid=26498): ERR: Terminated: ERROR {rc=1}  [trial-2354↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26498)]
04:45:27.675293 run   osmo-stp_10.42.42.5(pid=26498): stdout: 
| (launched: 2022-12-09_04:45:26.250284)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
04:45:27.801806 run   osmo-stp_10.42.42.5(pid=26498): stderr: 
| [0;m[38;5;43m20221209044526422 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221209044526422 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221209044526422 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221209044526423 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209044526423 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209044526423 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209044526423 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
04:45:27.923842 run   osmo-stp_10.42.42.5(pid=26498): stdout: 
| (launched: 2022-12-09_04:45:26.250284)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
04:45:28.045039 run   osmo-stp_10.42.42.5(pid=26498): stderr: 
| [0;m[38;5;43m20221209044526422 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221209044526422 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221209044526422 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221209044526423 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209044526423 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209044526423 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209044526423 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
04:45:28.186546 run              patchelf(pid=26501): Terminating (SIGINT)
04:45:28.353815 run              patchelf(pid=26501): Terminated: ok {rc=0}
04:45:28.384520 tst             ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=26498): Process ended prematurely: osmo-stp_10.42.42.5(pid=26498) [trial-2354↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26498)]  [trial-2354↪gprs:nanobts+band-900↪ping_idle_ping.py:27]
04:45:28.393399 tst             ping_idle_ping.py:27: Test FAILED (6.3 sec)
04:45:28.453924 run   osmo-hlr_10.42.42.2(pid=26495): ERR: Terminated: ERROR {rc=237}  [trial-2354↪gprs:nanobts+band-900↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=26495)]
04:45:28.503158 run   osmo-hlr_10.42.42.2(pid=26495): stdout: 
| (launched: 2022-12-09_04:45:25.338759) 
04:45:28.553214 run   osmo-hlr_10.42.42.2(pid=26495): stderr: 
| [0;m[1;31m20221209044525513 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221209044525513 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221209044525513 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221209044525513 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221209044525513 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221209044525513 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221209044525526 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2354/run.2022-12-09_03-35-04/gprs:nanobts+band-900/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221209044525535 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209044525535 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209044525535 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
04:45:28.595593 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26494): Terminating (SIGTERM)
04:45:28.635529 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26497): Terminating (SIGTERM)
04:45:28.675454 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26500): Terminating (SIGTERM)
04:45:28.684739 ---      ParallelTerminationStrategy: PID 26494 died...
04:45:28.738481 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26494): Terminated: ok {rc=0}
04:45:28.748481 ---      ParallelTerminationStrategy: PID 26497 died...
04:45:28.802166 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26497): Terminated: ok {rc=0}
04:45:28.812218 ---      ParallelTerminationStrategy: PID 26500 died...
04:45:28.865901 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26500): Terminated: ok {rc=0}
04:45:28.954679 bus                          /gobi_6: Setting Powered False
