
----------------------------------------------
trial-2355 dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo switch_tch_pdch.py
----------------------------------------------
06:28:27.166976 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
06:28:27.178384 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x bts (candidates: 1)
06:28:27.333423 tst               switch_tch_pdch.py: using LAC 19568
06:28:27.454610 tst               switch_tch_pdch.py: using RAC 188
06:28:27.576447 tst               switch_tch_pdch.py: using CellId 19568
06:28:27.698341 tst               switch_tch_pdch.py: using BVCI 19569
06:28:27.722106 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
06:28:27.733467 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
06:28:27.744710 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
06:28:27.756023 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
06:28:27.767223 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
06:28:27.778508 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
06:28:27.789951 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
06:28:27.801566 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2)
06:28:27.919811 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2)
06:28:28.205322 tst            switch_tch_pdch.py:51: start network...
06:28:28.334409 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
06:28:28.795198 run          create_hlr_db(pid=2291): Launched
06:28:28.913550 bus                          /gobi_6: Setting Powered False
06:28:29.985350 run          create_hlr_db(pid=2291): Terminated: ok {rc=0}
06:28:30.347561 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2293): Launched
06:28:30.637353 run    osmo-hlr_10.42.42.2(pid=2294): Launched
06:28:30.746870 run              osmo-stp_10.42.42.5: Starting osmo-stp
06:28:31.348604 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2296): Launched
06:28:31.701533 run    osmo-stp_10.42.42.5(pid=2297): Launched
06:28:31.943578 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
06:28:32.490922 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2299): Launched
06:28:32.601623 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
06:28:32.871650 run               patchelf(pid=2300): Launched
06:28:33.054734 run    osmo-stp_10.42.42.5(pid=2297): ERR: Terminated: ERROR {rc=1}  [trial-2355↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2297)]
06:28:33.188646 run    osmo-stp_10.42.42.5(pid=2297): stdout: 
| (launched: 2022-12-09_06:28:31.511391)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
06:28:33.323511 run    osmo-stp_10.42.42.5(pid=2297): stderr: 
| [0;m[38;5;43m20221209062831834 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221209062831834 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221209062831834 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221209062831835 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209062831835 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209062831835 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209062831835 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
06:28:33.452595 run    osmo-stp_10.42.42.5(pid=2297): stdout: 
| (launched: 2022-12-09_06:28:31.511391)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
06:28:33.580768 run    osmo-stp_10.42.42.5(pid=2297): stderr: 
| [0;m[38;5;43m20221209062831834 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221209062831834 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221209062831834 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221209062831835 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209062831835 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209062831835 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209062831835 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
06:28:33.729732 run               patchelf(pid=2300): Terminating (SIGINT)
06:28:33.905401 run               patchelf(pid=2300): Terminated: ok {rc=0}
06:28:33.937077 tst            switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=2297): Process ended prematurely: osmo-stp_10.42.42.5(pid=2297) [trial-2355↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2297)]  [trial-2355↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54]
06:28:33.946191 tst            switch_tch_pdch.py:54: Test FAILED (6.8 sec)
06:28:34.008204 run    osmo-hlr_10.42.42.2(pid=2294): ERR: Terminated: ERROR {rc=237}  [trial-2355↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=2294)]
06:28:34.059193 run    osmo-hlr_10.42.42.2(pid=2294): stdout: 
| (launched: 2022-12-09_06:28:30.493830) 
06:28:34.111331 run    osmo-hlr_10.42.42.2(pid=2294): stderr: 
| [0;m[1;31m20221209062830669 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221209062830669 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221209062830669 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221209062830669 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221209062830669 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221209062830669 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221209062830681 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2355/run.2022-12-09_05-28-02/dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221209062830690 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209062830690 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209062830690 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
06:28:34.155566 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2293): Terminating (SIGTERM)
06:28:34.197408 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2296): Terminating (SIGTERM)
06:28:34.239348 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2299): Terminating (SIGTERM)
06:28:34.249155 ---      ParallelTerminationStrategy: PID 2293 died...
06:28:34.304585 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2293): Terminated: ok {rc=0}
06:28:34.314868 ---      ParallelTerminationStrategy: PID 2296 died...
06:28:34.370387 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2296): Terminated: ok {rc=0}
06:28:34.380506 ---      ParallelTerminationStrategy: PID 2299 died...
06:28:34.435807 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2299): Terminated: ok {rc=0}
06:28:34.522955 bus                          /gobi_0: Setting Powered False
06:28:35.629210 bus                          /gobi_0: Setting Powered False
06:28:36.741438 bus                          /gobi_6: Setting Powered False
