
----------------------------------------------
trial-2355 gprs:nanobts+band-900+mod-bts0-egprs iperf3.py
----------------------------------------------
06:38:43.394901 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
06:38:43.406333 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x bts (candidates: 1)
06:38:43.552573 tst                        iperf3.py: using LAC 19624
06:38:43.679252 tst                        iperf3.py: using RAC 244
06:38:43.809955 tst                        iperf3.py: using CellId 19624
06:38:43.934749 tst                        iperf3.py: using BVCI 19625
06:38:43.959604 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
06:38:43.971111 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
06:38:43.982274 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
06:38:43.993835 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
06:38:44.005393 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
06:38:44.016744 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
06:38:44.028125 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
06:38:44.039332 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
06:38:44.050796 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x modem (candidates: 4)
06:38:44.326858 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
06:38:44.451965 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
06:38:44.763560 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3343): Launched
06:38:45.023084 run iperf3-srv_10.42.42.10(pid=3344): Launched
06:38:45.206672 tst                      iperf3.py:8: start network...
06:38:45.331925 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
06:38:45.805229 run          create_hlr_db(pid=3345): Launched
06:38:45.984483 bus                          /gobi_6: Setting Powered False
06:38:47.066007 run          create_hlr_db(pid=3345): Terminated: ok {rc=0}
06:38:47.513349 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3347): Launched
06:38:47.813143 run    osmo-hlr_10.42.42.2(pid=3348): Launched
06:38:47.929578 run              osmo-stp_10.42.42.5: Starting osmo-stp
06:38:48.456286 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3350): Launched
06:38:48.754444 run    osmo-stp_10.42.42.5(pid=3351): Launched
06:38:48.863358 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
06:38:49.386681 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3353): Launched
06:38:49.494573 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
06:38:49.757527 run               patchelf(pid=3354): Launched
06:38:49.933800 run    osmo-stp_10.42.42.5(pid=3351): ERR: Terminated: ERROR {rc=1}  [trial-2355↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3351)]
06:38:50.062508 run    osmo-stp_10.42.42.5(pid=3351): stdout: 
| (launched: 2022-12-09_06:38:48.607763)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
06:38:50.191777 run    osmo-stp_10.42.42.5(pid=3351): stderr: 
| [0;m[38;5;43m20221209063848775 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221209063848775 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221209063848775 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221209063848776 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209063848778 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209063848778 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209063848778 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
06:38:50.316714 run    osmo-stp_10.42.42.5(pid=3351): stdout: 
| (launched: 2022-12-09_06:38:48.607763)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
06:38:50.441120 run    osmo-stp_10.42.42.5(pid=3351): stderr: 
| [0;m[38;5;43m20221209063848775 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221209063848775 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221209063848775 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221209063848776 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209063848778 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209063848778 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209063848778 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
06:38:50.584378 run               patchelf(pid=3354): Terminating (SIGINT)
06:38:50.752677 run               patchelf(pid=3354): Terminated: ok {rc=0}
06:38:50.783652 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=3351): Process ended prematurely: osmo-stp_10.42.42.5(pid=3351) [trial-2355↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3351)]  [trial-2355↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8]
06:38:50.792805 tst                      iperf3.py:8: Test FAILED (7.4 sec)
06:38:50.853428 run    osmo-hlr_10.42.42.2(pid=3348): ERR: Terminated: ERROR {rc=237}  [trial-2355↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=3348)]
06:38:50.902586 run    osmo-hlr_10.42.42.2(pid=3348): stdout: 
| (launched: 2022-12-09_06:38:47.665270) 
06:38:50.952244 run    osmo-hlr_10.42.42.2(pid=3348): stderr: 
| [0;m[1;31m20221209063847840 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221209063847840 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221209063847840 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221209063847840 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221209063847840 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221209063847840 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221209063847853 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2355/run.2022-12-09_05-28-02/gprs:nanobts+band-900+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221209063847861 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209063847861 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209063847861 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
06:38:50.994729 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3343): Terminating (SIGTERM)
06:38:51.035066 run iperf3-srv_10.42.42.10(pid=3344): Terminating (SIGTERM)
06:38:51.075296 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3347): Terminating (SIGTERM)
06:38:51.115731 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3350): Terminating (SIGTERM)
06:38:51.155753 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3353): Terminating (SIGTERM)
06:38:51.165443 ---      ParallelTerminationStrategy: PID 3343 died...
06:38:51.219199 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3343): Terminated: ok {rc=0}
06:38:51.229114 ---      ParallelTerminationStrategy: PID 3344 died...
06:38:51.282458 run iperf3-srv_10.42.42.10(pid=3344): Terminated {rc=256}
06:38:51.292301 ---      ParallelTerminationStrategy: PID 3347 died...
06:38:51.345730 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3347): Terminated: ok {rc=0}
06:38:51.355582 ---      ParallelTerminationStrategy: PID 3350 died...
06:38:51.408850 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3350): Terminated: ok {rc=0}
06:38:51.418904 ---      ParallelTerminationStrategy: PID 3353 died...
06:38:51.472217 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3353): Terminated: ok {rc=0}
06:38:51.555886 bus                          /gobi_6: Setting Powered False
