
----------------------------------------------
trial-2355 gprs:trx-lms-limenet-micro+mod-bts0-egprs iperf3.py
----------------------------------------------
06:25:31.039743 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
06:25:31.052216 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x bts (candidates: 1)
06:25:31.222852 tst                        iperf3.py: using LAC 19553
06:25:31.353609 tst                        iperf3.py: using RAC 173
06:25:31.506274 tst                        iperf3.py: using CellId 19553
06:25:31.667150 tst                        iperf3.py: using BVCI 19554
06:25:31.691915 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
06:25:31.704163 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
06:25:31.716285 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
06:25:31.729742 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
06:25:31.741262 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
06:25:31.753416 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
06:25:31.766744 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
06:25:31.779244 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
06:25:31.791016 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x modem (candidates: 4)
06:25:32.093960 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
06:25:32.231402 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
06:25:32.563621 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2088): Launched
06:25:32.840014 run iperf3-srv_10.42.42.10(pid=2089): Launched
06:25:33.035641 tst                      iperf3.py:8: start network...
06:25:33.168870 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
06:25:33.681140 run          create_hlr_db(pid=2090): Launched
06:25:33.866197 bus                          /gobi_6: Setting Powered False
06:25:34.887436 run          create_hlr_db(pid=2090): Terminated: ok {rc=0}
06:25:35.311403 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2092): Launched
06:25:35.630844 run    osmo-hlr_10.42.42.2(pid=2093): Launched
06:25:35.750539 run              osmo-stp_10.42.42.5: Starting osmo-stp
06:25:36.306068 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2095): Launched
06:25:36.623240 run    osmo-stp_10.42.42.5(pid=2096): Launched
06:25:36.739718 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
06:25:37.295785 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2098): Launched
06:25:37.409658 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
06:25:37.687749 run               patchelf(pid=2099): Launched
06:25:37.874926 run    osmo-stp_10.42.42.5(pid=2096): ERR: Terminated: ERROR {rc=1}  [trial-2355↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2096)]
06:25:38.010996 run    osmo-stp_10.42.42.5(pid=2096): stdout: 
| (launched: 2022-12-09_06:25:36.467590)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
06:25:38.147715 run    osmo-stp_10.42.42.5(pid=2096): stderr: 
| [0;m[38;5;43m20221209062536661 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221209062536661 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221209062536661 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221209062536662 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209062536663 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209062536663 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209062536663 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
06:25:38.280775 run    osmo-stp_10.42.42.5(pid=2096): stdout: 
| (launched: 2022-12-09_06:25:36.467590)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
06:25:38.412589 run    osmo-stp_10.42.42.5(pid=2096): stderr: 
| [0;m[38;5;43m20221209062536661 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221209062536661 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221209062536661 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221209062536662 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209062536663 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209062536663 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209062536663 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
06:25:38.565180 run               patchelf(pid=2099): Terminating (SIGINT)
06:25:38.745254 run               patchelf(pid=2099): Terminated: ok {rc=0}
06:25:38.778246 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=2096): Process ended prematurely: osmo-stp_10.42.42.5(pid=2096) [trial-2355↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2096)]  [trial-2355↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8]
06:25:38.788093 tst                      iperf3.py:8: Test FAILED (7.8 sec)
06:25:38.850896 run    osmo-hlr_10.42.42.2(pid=2093): ERR: Terminated: ERROR {rc=237}  [trial-2355↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=2093)]
06:25:38.906949 run    osmo-hlr_10.42.42.2(pid=2093): stdout: 
| (launched: 2022-12-09_06:25:35.473985) 
06:25:38.958708 run    osmo-hlr_10.42.42.2(pid=2093): stderr: 
| [0;m[1;31m20221209062535674 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221209062535674 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221209062535674 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221209062535675 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221209062535675 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221209062535675 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221209062535688 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2355/run.2022-12-09_05-28-02/gprs:trx-lms-limenet-micro+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221209062535696 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209062535696 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209062535696 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
06:25:39.003270 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2088): Terminating (SIGTERM)
06:25:39.045408 run iperf3-srv_10.42.42.10(pid=2089): Terminating (SIGTERM)
06:25:39.087646 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2092): Terminating (SIGTERM)
06:25:39.130230 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2095): Terminating (SIGTERM)
06:25:39.172308 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2098): Terminating (SIGTERM)
06:25:39.182130 ---      ParallelTerminationStrategy: PID 2088 died...
06:25:39.238813 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2088): Terminated: ok {rc=0}
06:25:39.249033 ---      ParallelTerminationStrategy: PID 2089 died...
06:25:39.304578 run iperf3-srv_10.42.42.10(pid=2089): Terminated {rc=256}
06:25:39.315046 ---      ParallelTerminationStrategy: PID 2092 died...
06:25:39.371198 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2092): Terminated: ok {rc=0}
06:25:39.381371 ---      ParallelTerminationStrategy: PID 2095 died...
06:25:39.437036 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2095): Terminated: ok {rc=0}
06:25:39.447246 ---      ParallelTerminationStrategy: PID 2098 died...
06:25:39.502966 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2098): Terminated: ok {rc=0}
06:25:39.590215 bus                          /gobi_6: Setting Powered False
