
----------------------------------------------
trial-2356 gprs:nanobts+band-1900 ping.py
----------------------------------------------
07:59:29.712190 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
07:59:29.724361 tst           gprs:nanobts+band-1900: Using 1 x bts (candidates: 1)
07:59:29.858606 tst                          ping.py: using LAC 20049
07:59:29.983992 tst                          ping.py: using RAC 159
07:59:30.109102 tst                          ping.py: using CellId 20049
07:59:30.236477 tst                          ping.py: using BVCI 20050
07:59:30.261008 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
07:59:30.272327 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
07:59:30.283628 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
07:59:30.294846 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
07:59:30.305955 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
07:59:30.317141 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
07:59:30.328373 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
07:59:30.339647 tst           gprs:nanobts+band-1900: Using 1 x modem (candidates: 4)
07:59:30.630824 tst                       ping.py:19: start network...
07:59:30.764117 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
07:59:31.309994 run         create_hlr_db(pid=10601): Launched
07:59:31.488182 bus                          /gobi_6: Setting Powered False
07:59:32.512901 run         create_hlr_db(pid=10601): Terminated: ok {rc=0}
07:59:32.913960 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10603): Launched
07:59:33.212626 run   osmo-hlr_10.42.42.2(pid=10604): Launched
07:59:33.326364 run              osmo-stp_10.42.42.5: Starting osmo-stp
07:59:33.853486 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10606): Launched
07:59:34.151945 run   osmo-stp_10.42.42.5(pid=10607): Launched
07:59:34.261251 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
07:59:34.781314 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10609): Launched
07:59:34.887387 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
07:59:35.147604 run              patchelf(pid=10610): Launched
07:59:35.321600 run   osmo-stp_10.42.42.5(pid=10607): ERR: Terminated: ERROR {rc=1}  [trial-2356↪gprs:nanobts+band-1900↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10607)]
07:59:35.449459 run   osmo-stp_10.42.42.5(pid=10607): stdout: 
| (launched: 2022-12-09_07:59:34.004158)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
07:59:35.578045 run   osmo-stp_10.42.42.5(pid=10607): stderr: 
| [0;m[38;5;43m20221209075934172 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221209075934172 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221209075934173 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221209075934173 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209075934174 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209075934174 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209075934174 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
07:59:35.702233 run   osmo-stp_10.42.42.5(pid=10607): stdout: 
| (launched: 2022-12-09_07:59:34.004158)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
07:59:35.825493 run   osmo-stp_10.42.42.5(pid=10607): stderr: 
| [0;m[38;5;43m20221209075934172 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221209075934172 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221209075934173 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221209075934173 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209075934174 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209075934174 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209075934174 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
07:59:35.967517 run              patchelf(pid=10610): Terminating (SIGINT)
07:59:36.134319 run              patchelf(pid=10610): Terminated: ok {rc=0}
07:59:36.164728 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=10607): Process ended prematurely: osmo-stp_10.42.42.5(pid=10607) [trial-2356↪gprs:nanobts+band-1900↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10607)]  [trial-2356↪gprs:nanobts+band-1900↪ping.py:22]
07:59:36.173398 tst                       ping.py:22: Test FAILED (6.5 sec)
07:59:36.234320 run   osmo-hlr_10.42.42.2(pid=10604): ERR: Terminated: ERROR {rc=237}  [trial-2356↪gprs:nanobts+band-1900↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10604)]
07:59:36.283341 run   osmo-hlr_10.42.42.2(pid=10604): stdout: 
| (launched: 2022-12-09_07:59:33.065183) 
07:59:36.333142 run   osmo-hlr_10.42.42.2(pid=10604): stderr: 
| [0;m[1;31m20221209075933240 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221209075933240 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221209075933240 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221209075933240 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221209075933240 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221209075933240 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221209075933253 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2356/run.2022-12-09_06-55-12/gprs:nanobts+band-1900/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221209075933262 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209075933262 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209075933262 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
07:59:36.375159 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10603): Terminating (SIGTERM)
07:59:36.415017 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10606): Terminating (SIGTERM)
07:59:36.455136 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10609): Terminating (SIGTERM)
07:59:36.464641 ---      ParallelTerminationStrategy: PID 10603 died...
07:59:36.517906 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10603): Terminated: ok {rc=0}
07:59:36.528116 ---      ParallelTerminationStrategy: PID 10606 died...
07:59:36.581130 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10606): Terminated: ok {rc=0}
07:59:36.591089 ---      ParallelTerminationStrategy: PID 10609 died...
07:59:36.644029 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10609): Terminated: ok {rc=0}
07:59:36.731350 bus                          /gobi_6: Setting Powered False
