
----------------------------------------------
trial-2356 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py
----------------------------------------------
08:08:00.758121 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
08:08:00.770676 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1)
08:08:00.931338 tst         cs_paging_gprs_active.py: using LAC 20094
08:08:01.066719 tst         cs_paging_gprs_active.py: using RAC 204
08:08:01.194456 tst         cs_paging_gprs_active.py: using CellId 20094
08:08:01.324850 tst         cs_paging_gprs_active.py: using BVCI 20095
08:08:01.351981 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
08:08:01.365132 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
08:08:01.377943 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
08:08:01.390891 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
08:08:01.403749 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
08:08:01.416606 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
08:08:01.429587 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
08:08:01.442359 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
08:08:01.455522 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
08:08:01.584276 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
08:08:01.968317 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003...
08:08:02.111757 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
08:08:02.478598 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11272): Launched
08:08:02.793482 run iperf3-srv_10.42.42.10(pid=11283): Launched
08:08:03.017788 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004...
08:08:03.175013 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
08:08:03.594319 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11329): Launched
08:08:03.945693 run iperf3-srv_10.42.42.10(pid=11377): Launched
08:08:04.180838 tst      cs_paging_gprs_active.py:38: start network...
08:08:04.346695 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
08:08:04.974095 run         create_hlr_db(pid=11505): Launched
08:08:05.167594 bus                          /gobi_6: Setting Powered False
08:08:06.186439 run         create_hlr_db(pid=11505): Terminated: ok {rc=0}
08:08:06.641596 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11508): Launched
08:08:07.038013 run   osmo-hlr_10.42.42.2(pid=11510): Launched
08:08:07.224543 run              osmo-stp_10.42.42.5: Starting osmo-stp
08:08:07.859194 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11513): Launched
08:08:08.284790 run   osmo-stp_10.42.42.5(pid=11514): Launched
08:08:08.507608 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
08:08:09.100704 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11516): Launched
08:08:09.221344 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
08:08:09.531176 run              patchelf(pid=11517): Launched
08:08:09.730173 run   osmo-stp_10.42.42.5(pid=11514): ERR: Terminated: ERROR {rc=1}  [trial-2356↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11514)]
08:08:09.874968 run   osmo-stp_10.42.42.5(pid=11514): stdout: 
| (launched: 2022-12-09_08:08:08.030869)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
08:08:10.022895 run   osmo-stp_10.42.42.5(pid=11514): stderr: 
| [0;m[38;5;43m20221209080808319 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221209080808319 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221209080808319 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221209080808320 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209080808321 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209080808321 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209080808321 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
08:08:10.162854 run   osmo-stp_10.42.42.5(pid=11514): stdout: 
| (launched: 2022-12-09_08:08:08.030869)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
08:08:10.304543 run   osmo-stp_10.42.42.5(pid=11514): stderr: 
| [0;m[38;5;43m20221209080808319 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221209080808319 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221209080808319 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221209080808320 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209080808321 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209080808321 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209080808321 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
08:08:10.467927 run              patchelf(pid=11517): Terminating (SIGINT)
08:08:10.662921 run              patchelf(pid=11517): Terminated: ok {rc=0}
08:08:10.697854 tst      cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=11514): Process ended prematurely: osmo-stp_10.42.42.5(pid=11514) [trial-2356↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11514)]  [trial-2356↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38]
08:08:10.708199 tst      cs_paging_gprs_active.py:38: Test FAILED (10.0 sec)
08:08:10.773311 run   osmo-hlr_10.42.42.2(pid=11510): ERR: Terminated: ERROR {rc=237}  [trial-2356↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11510)]
08:08:10.827289 run   osmo-hlr_10.42.42.2(pid=11510): stdout: 
| (launched: 2022-12-09_08:08:06.813929) 
08:08:10.881053 run   osmo-hlr_10.42.42.2(pid=11510): stderr: 
| [0;m[1;31m20221209080807144 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221209080807144 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221209080807144 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221209080807144 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221209080807144 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221209080807144 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221209080807168 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2356/run.2022-12-09_06-55-12/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221209080807176 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209080807181 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209080807181 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
08:08:10.927867 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11272): Terminating (SIGTERM)
08:08:10.975524 run iperf3-srv_10.42.42.10(pid=11283): Terminating (SIGTERM)
08:08:11.024724 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11329): Terminating (SIGTERM)
08:08:11.069465 run iperf3-srv_10.42.42.10(pid=11377): Terminating (SIGTERM)
08:08:11.114560 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11508): Terminating (SIGTERM)
08:08:11.162750 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11513): Terminating (SIGTERM)
08:08:11.211221 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11516): Terminating (SIGTERM)
08:08:11.222289 ---      ParallelTerminationStrategy: PID 11272 died...
08:08:11.283942 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11272): Terminated: ok {rc=0}
08:08:11.294917 ---      ParallelTerminationStrategy: PID 11283 died...
08:08:11.353977 run iperf3-srv_10.42.42.10(pid=11283): Terminated {rc=256}
08:08:11.366375 ---      ParallelTerminationStrategy: PID 11329 died...
08:08:11.426136 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11329): Terminated: ok {rc=0}
08:08:11.437342 ---      ParallelTerminationStrategy: PID 11377 died...
08:08:11.498073 run iperf3-srv_10.42.42.10(pid=11377): Terminated {rc=256}
08:08:11.509230 ---      ParallelTerminationStrategy: PID 11508 died...
08:08:11.568572 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11508): Terminated: ok {rc=0}
08:08:11.581991 ---      ParallelTerminationStrategy: PID 11513 died...
08:08:11.640695 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11513): Terminated: ok {rc=0}
08:08:11.651694 ---      ParallelTerminationStrategy: PID 11516 died...
08:08:11.712483 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11516): Terminated: ok {rc=0}
08:08:11.808867 bus                          /gobi_0: Setting Powered False
08:08:12.919850 bus                          /gobi_0: Setting Powered False
08:08:14.036277 bus                          /gobi_6: Setting Powered False
