
----------------------------------------------
trial-2357 gprs:nanobts+band-1900 ping.py
----------------------------------------------
09:27:11.327368 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
09:27:11.338940 tst           gprs:nanobts+band-1900: Using 1 x bts (candidates: 1)
09:27:11.461870 tst                          ping.py: using LAC 20510
09:27:11.585374 tst                          ping.py: using RAC 110
09:27:11.702903 tst                          ping.py: using CellId 20510
09:27:11.818920 tst                          ping.py: using BVCI 20511
09:27:11.841809 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
09:27:11.852756 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
09:27:11.863599 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
09:27:11.874559 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
09:27:11.885242 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
09:27:11.895929 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
09:27:11.906734 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
09:27:11.917518 tst           gprs:nanobts+band-1900: Using 1 x modem (candidates: 4)
09:27:12.187254 tst                       ping.py:19: start network...
09:27:12.309242 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
09:27:12.782802 run         create_hlr_db(pid=20280): Launched
09:27:12.952271 bus                          /gobi_6: Setting Powered False
09:27:13.972138 run         create_hlr_db(pid=20280): Terminated: ok {rc=0}
09:27:14.390282 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20282): Launched
09:27:14.685229 run   osmo-hlr_10.42.42.2(pid=20283): Launched
09:27:14.796250 run              osmo-stp_10.42.42.5: Starting osmo-stp
09:27:15.311796 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20285): Launched
09:27:15.607528 run   osmo-stp_10.42.42.5(pid=20286): Launched
09:27:15.714530 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
09:27:16.264442 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20288): Launched
09:27:16.382684 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
09:27:16.685230 run              patchelf(pid=20289): Launched
09:27:16.877864 run   osmo-stp_10.42.42.5(pid=20286): ERR: Terminated: ERROR {rc=1}  [trial-2357↪gprs:nanobts+band-1900↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20286)]
09:27:17.019438 run   osmo-stp_10.42.42.5(pid=20286): stdout: 
| (launched: 2022-12-09_09:27:15.461972)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
09:27:17.161747 run   osmo-stp_10.42.42.5(pid=20286): stderr: 
| [0;m[38;5;43m20221209092715629 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221209092715629 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221209092715629 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221209092715630 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209092715630 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209092715630 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209092715630 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
09:27:17.295164 run   osmo-stp_10.42.42.5(pid=20286): stdout: 
| (launched: 2022-12-09_09:27:15.461972)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
09:27:17.425874 run   osmo-stp_10.42.42.5(pid=20286): stderr: 
| [0;m[38;5;43m20221209092715629 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221209092715629 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221209092715629 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221209092715630 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209092715630 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209092715630 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209092715630 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
09:27:17.577612 run              patchelf(pid=20289): Terminating (SIGINT)
09:27:17.756068 run              patchelf(pid=20289): Terminated: ok {rc=0}
09:27:17.788657 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=20286): Process ended prematurely: osmo-stp_10.42.42.5(pid=20286) [trial-2357↪gprs:nanobts+band-1900↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20286)]  [trial-2357↪gprs:nanobts+band-1900↪ping.py:22]
09:27:17.798217 tst                       ping.py:22: Test FAILED (6.5 sec)
09:27:17.861924 run   osmo-hlr_10.42.42.2(pid=20283): ERR: Terminated: ERROR {rc=237}  [trial-2357↪gprs:nanobts+band-1900↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=20283)]
09:27:17.913377 run   osmo-hlr_10.42.42.2(pid=20283): stdout: 
| (launched: 2022-12-09_09:27:14.540129) 
09:27:17.964884 run   osmo-hlr_10.42.42.2(pid=20283): stderr: 
| [0;m[1;31m20221209092714713 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221209092714713 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221209092714713 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221209092714714 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221209092714714 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221209092714714 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221209092714726 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2357/run.2022-12-09_08-22-41/gprs:nanobts+band-1900/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221209092714735 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209092714735 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209092714735 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
09:27:18.009210 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20282): Terminating (SIGTERM)
09:27:18.050899 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20285): Terminating (SIGTERM)
09:27:18.092826 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20288): Terminating (SIGTERM)
09:27:18.103141 ---      ParallelTerminationStrategy: PID 20282 died...
09:27:18.159159 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20282): Terminated: ok {rc=0}
09:27:18.169473 ---      ParallelTerminationStrategy: PID 20285 died...
09:27:18.225405 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20285): Terminated: ok {rc=0}
09:27:18.235874 ---      ParallelTerminationStrategy: PID 20288 died...
09:27:18.291684 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20288): Terminated: ok {rc=0}
09:27:18.377709 bus                          /gobi_6: Setting Powered False
