
----------------------------------------------
trial-2358 gprs:nanobts+band-1900 ping_idle_ping.py
----------------------------------------------
10:54:49.881598 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
10:54:49.893455 tst           gprs:nanobts+band-1900: Using 1 x bts (candidates: 1)
10:54:50.021866 tst                ping_idle_ping.py: using LAC 20972
10:54:50.138408 tst                ping_idle_ping.py: using RAC 62
10:54:50.258188 tst                ping_idle_ping.py: using CellId 20972
10:54:50.375505 tst                ping_idle_ping.py: using BVCI 20973
10:54:50.398328 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
10:54:50.409068 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
10:54:50.419841 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
10:54:50.430745 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
10:54:50.441345 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
10:54:50.451832 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
10:54:50.462833 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
10:54:50.473794 tst           gprs:nanobts+band-1900: Using 1 x modem (candidates: 4)
10:54:50.760687 tst             ping_idle_ping.py:24: start network...
10:54:50.893141 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
10:54:51.399573 run         create_hlr_db(pid=28842): Launched
10:54:51.584544 bus                          /gobi_6: Setting Powered False
10:54:52.606791 run         create_hlr_db(pid=28842): Terminated: ok {rc=0}
10:54:53.007409 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28844): Launched
10:54:53.306613 run   osmo-hlr_10.42.42.2(pid=28845): Launched
10:54:53.416454 run              osmo-stp_10.42.42.5: Starting osmo-stp
10:54:53.935090 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28847): Launched
10:54:54.233634 run   osmo-stp_10.42.42.5(pid=28848): Launched
10:54:54.341006 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
10:54:54.860245 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28850): Launched
10:54:54.966576 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
10:54:55.226410 run              patchelf(pid=28851): Launched
10:54:55.401633 run   osmo-stp_10.42.42.5(pid=28848): ERR: Terminated: ERROR {rc=1}  [trial-2358↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28848)]
10:54:55.529469 run   osmo-stp_10.42.42.5(pid=28848): stdout: 
| (launched: 2022-12-09_10:54:54.085809)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
10:54:55.656872 run   osmo-stp_10.42.42.5(pid=28848): stderr: 
| [0;m[38;5;43m20221209105454252 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221209105454252 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221209105454253 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221209105454253 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209105454254 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209105454254 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209105454254 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
10:54:55.780758 run   osmo-stp_10.42.42.5(pid=28848): stdout: 
| (launched: 2022-12-09_10:54:54.085809)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
10:54:55.903428 run   osmo-stp_10.42.42.5(pid=28848): stderr: 
| [0;m[38;5;43m20221209105454252 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221209105454252 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221209105454253 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221209105454253 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209105454254 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209105454254 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209105454254 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
10:54:56.046016 run              patchelf(pid=28851): Terminating (SIGINT)
10:54:56.213257 run              patchelf(pid=28851): Terminated: ok {rc=0}
10:54:56.243853 tst             ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=28848): Process ended prematurely: osmo-stp_10.42.42.5(pid=28848) [trial-2358↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28848)]  [trial-2358↪gprs:nanobts+band-1900↪ping_idle_ping.py:27]
10:54:56.252590 tst             ping_idle_ping.py:27: Test FAILED (6.4 sec)
10:54:56.312549 run   osmo-hlr_10.42.42.2(pid=28845): ERR: Terminated: ERROR {rc=237}  [trial-2358↪gprs:nanobts+band-1900↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=28845)]
10:54:56.361206 run   osmo-hlr_10.42.42.2(pid=28845): stdout: 
| (launched: 2022-12-09_10:54:53.158351) 
10:54:56.410948 run   osmo-hlr_10.42.42.2(pid=28845): stderr: 
| [0;m[1;31m20221209105453329 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221209105453329 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221209105453329 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221209105453329 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221209105453329 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221209105453329 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221209105453342 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2358/run.2022-12-09_09-50-18/gprs:nanobts+band-1900/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221209105453353 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209105453353 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209105453353 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
10:54:56.453416 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28844): Terminating (SIGTERM)
10:54:56.493133 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28847): Terminating (SIGTERM)
10:54:56.532753 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28850): Terminating (SIGTERM)
10:54:56.542171 ---      ParallelTerminationStrategy: PID 28844 died...
10:54:56.595285 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28844): Terminated: ok {rc=0}
10:54:56.605020 ---      ParallelTerminationStrategy: PID 28847 died...
10:54:56.657712 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28847): Terminated: ok {rc=0}
10:54:56.667214 ---      ParallelTerminationStrategy: PID 28850 died...
10:54:56.719744 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28850): Terminated: ok {rc=0}
10:54:56.807468 bus                          /gobi_6: Setting Powered False
