
----------------------------------------------
trial-2358 gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py
----------------------------------------------
10:34:01.198889 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
10:34:01.211998 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1)
10:34:01.376747 tst         cs_paging_gprs_active.py: using LAC 20861
10:34:01.501151 tst         cs_paging_gprs_active.py: using RAC 206
10:34:01.625867 tst         cs_paging_gprs_active.py: using CellId 20861
10:34:01.783816 tst         cs_paging_gprs_active.py: using BVCI 20862
10:34:01.818744 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
10:34:01.834266 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
10:34:01.850294 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
10:34:01.866414 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
10:34:01.881788 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
10:34:01.895437 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
10:34:01.912286 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
10:34:01.928531 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
10:34:01.944917 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
10:34:02.092762 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
10:34:02.411757 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003...
10:34:02.548738 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
10:34:02.887266 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26854): Launched
10:34:03.168378 run iperf3-srv_10.42.42.10(pid=26855): Launched
10:34:03.368152 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004...
10:34:03.504334 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
10:34:03.842481 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26856): Launched
10:34:04.123390 run iperf3-srv_10.42.42.10(pid=26857): Launched
10:34:04.322632 tst      cs_paging_gprs_active.py:38: start network...
10:34:04.459385 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
10:34:04.971807 run         create_hlr_db(pid=26858): Launched
10:34:05.161502 bus                          /gobi_6: Setting Powered False
10:34:06.182344 run         create_hlr_db(pid=26858): Terminated: ok {rc=0}
10:34:06.592940 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26860): Launched
10:34:06.900658 run   osmo-hlr_10.42.42.2(pid=26861): Launched
10:34:07.013048 run              osmo-stp_10.42.42.5: Starting osmo-stp
10:34:07.545424 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26863): Launched
10:34:07.853292 run   osmo-stp_10.42.42.5(pid=26864): Launched
10:34:07.963841 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
10:34:08.495677 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26866): Launched
10:34:08.603707 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
10:34:08.868826 run              patchelf(pid=26867): Launched
10:34:09.047024 run   osmo-stp_10.42.42.5(pid=26864): ERR: Terminated: ERROR {rc=1}  [trial-2358↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26864)]
10:34:09.177209 run   osmo-stp_10.42.42.5(pid=26864): stdout: 
| (launched: 2022-12-09_10:34:07.699551)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
10:34:09.306945 run   osmo-stp_10.42.42.5(pid=26864): stderr: 
| [0;m[38;5;43m20221209103407866 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221209103407866 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221209103407867 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221209103407867 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209103407867 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209103407868 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209103407868 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
10:34:09.432636 run   osmo-stp_10.42.42.5(pid=26864): stdout: 
| (launched: 2022-12-09_10:34:07.699551)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
10:34:09.557318 run   osmo-stp_10.42.42.5(pid=26864): stderr: 
| [0;m[38;5;43m20221209103407866 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221209103407866 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221209103407867 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221209103407867 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209103407867 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209103407868 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209103407868 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
10:34:09.701762 run              patchelf(pid=26867): Terminating (SIGINT)
10:34:09.871511 run              patchelf(pid=26867): Terminated: ok {rc=0}
10:34:09.902777 tst      cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=26864): Process ended prematurely: osmo-stp_10.42.42.5(pid=26864) [trial-2358↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26864)]  [trial-2358↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38]
10:34:09.912114 tst      cs_paging_gprs_active.py:38: Test FAILED (8.8 sec)
10:34:09.972550 run   osmo-hlr_10.42.42.2(pid=26861): ERR: Terminated: ERROR {rc=237}  [trial-2358↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=26861)]
10:34:10.021857 run   osmo-hlr_10.42.42.2(pid=26861): stdout: 
| (launched: 2022-12-09_10:34:06.749321) 
10:34:10.071977 run   osmo-hlr_10.42.42.2(pid=26861): stderr: 
| [0;m[1;31m20221209103406923 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221209103406923 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221209103406923 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221209103406923 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221209103406923 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221209103406923 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221209103406938 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2358/run.2022-12-09_09-50-18/gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221209103406948 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209103406948 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209103406949 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
10:34:10.114611 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26854): Terminating (SIGTERM)
10:34:10.154434 run iperf3-srv_10.42.42.10(pid=26855): Terminating (SIGTERM)
10:34:10.194361 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26856): Terminating (SIGTERM)
10:34:10.234166 run iperf3-srv_10.42.42.10(pid=26857): Terminating (SIGTERM)
10:34:10.274009 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26860): Terminating (SIGTERM)
10:34:10.313850 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26863): Terminating (SIGTERM)
10:34:10.353535 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26866): Terminating (SIGTERM)
10:34:10.362709 ---      ParallelTerminationStrategy: PID 26854 died...
10:34:10.416523 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26854): Terminated: ok {rc=0}
10:34:10.426317 ---      ParallelTerminationStrategy: PID 26855 died...
10:34:10.479158 run iperf3-srv_10.42.42.10(pid=26855): Terminated {rc=256}
10:34:10.488658 ---      ParallelTerminationStrategy: PID 26856 died...
10:34:10.541572 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26856): Terminated: ok {rc=0}
10:34:10.551123 ---      ParallelTerminationStrategy: PID 26857 died...
10:34:10.604191 run iperf3-srv_10.42.42.10(pid=26857): Terminated {rc=256}
10:34:10.613683 ---      ParallelTerminationStrategy: PID 26860 died...
10:34:10.666493 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26860): Terminated: ok {rc=0}
10:34:10.676077 ---      ParallelTerminationStrategy: PID 26863 died...
10:34:10.729432 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26863): Terminated: ok {rc=0}
10:34:10.739043 ---      ParallelTerminationStrategy: PID 26866 died...
10:34:10.791940 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26866): Terminated: ok {rc=0}
10:34:10.881678 bus                          /gobi_0: Setting Powered False
10:34:12.001884 bus                          /gobi_0: Setting Powered False
10:34:13.110869 bus                          /gobi_6: Setting Powered False
