
----------------------------------------------
trial-2359 gprs:trx-sysmocell5000+mod-bts0-dynts-ipa iperf3.py
----------------------------------------------
11:51:36.073703 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
11:51:36.085682 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1)
11:51:36.248103 tst                        iperf3.py: using LAC 21269
11:51:36.372062 tst                        iperf3.py: using RAC 104
11:51:36.495237 tst                        iperf3.py: using CellId 21269
11:51:36.619341 tst                        iperf3.py: using BVCI 21270
11:51:36.643066 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
11:51:36.654219 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
11:51:36.665248 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
11:51:36.676205 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
11:51:36.687122 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
11:51:36.698016 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
11:51:36.709233 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
11:51:36.720010 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
11:51:36.731057 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4)
11:51:37.032824 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
11:51:37.172497 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
11:51:37.518626 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2010): Launched
11:51:37.807503 run iperf3-srv_10.42.42.10(pid=2011): Launched
11:51:38.013054 tst                      iperf3.py:8: start network...
11:51:38.153243 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
11:51:38.681281 run          create_hlr_db(pid=2012): Launched
11:51:38.874056 bus                          /gobi_6: Setting Powered False
11:51:39.895365 run          create_hlr_db(pid=2012): Terminated: ok {rc=0}
11:51:40.316395 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2014): Launched
11:51:40.630321 run    osmo-hlr_10.42.42.2(pid=2015): Launched
11:51:40.744299 run              osmo-stp_10.42.42.5: Starting osmo-stp
11:51:41.286835 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2017): Launched
11:51:41.599138 run    osmo-stp_10.42.42.5(pid=2018): Launched
11:51:41.712196 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
11:51:42.258446 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2020): Launched
11:51:42.370015 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
11:51:42.644557 run               patchelf(pid=2021): Launched
11:51:42.827063 run    osmo-stp_10.42.42.5(pid=2018): ERR: Terminated: ERROR {rc=1}  [trial-2359↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2018)]
11:51:42.959946 run    osmo-stp_10.42.42.5(pid=2018): stdout: 
| (launched: 2022-12-09_11:51:41.444759)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
11:51:43.093325 run    osmo-stp_10.42.42.5(pid=2018): stderr: 
| [0;m[38;5;43m20221209115141619 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221209115141619 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221209115141620 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221209115141620 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209115141620 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209115141620 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209115141621 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
11:51:43.223526 run    osmo-stp_10.42.42.5(pid=2018): stdout: 
| (launched: 2022-12-09_11:51:41.444759)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
11:51:43.351018 run    osmo-stp_10.42.42.5(pid=2018): stderr: 
| [0;m[38;5;43m20221209115141619 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221209115141619 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221209115141620 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221209115141620 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209115141620 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209115141620 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209115141621 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
11:51:43.500881 run               patchelf(pid=2021): Terminating (SIGINT)
11:51:43.678052 run               patchelf(pid=2021): Terminated: ok {rc=0}
11:51:43.710378 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=2018): Process ended prematurely: osmo-stp_10.42.42.5(pid=2018) [trial-2359↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2018)]  [trial-2359↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py:8]
11:51:43.719577 tst                      iperf3.py:8: Test FAILED (7.7 sec)
11:51:43.780158 run    osmo-hlr_10.42.42.2(pid=2015): ERR: Terminated: ERROR {rc=237}  [trial-2359↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=2015)]
11:51:43.829835 run    osmo-hlr_10.42.42.2(pid=2015): stdout: 
| (launched: 2022-12-09_11:51:40.475786) 
11:51:43.879822 run    osmo-hlr_10.42.42.2(pid=2015): stderr: 
| [0;m[1;31m20221209115140656 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221209115140656 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221209115140656 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221209115140656 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221209115140656 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221209115140657 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221209115140668 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2359/run.2022-12-09_11-17-44/gprs:trx-sysmocell5000+mod-bts0-dynts-ipa/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221209115140679 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209115140679 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209115140679 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
11:51:43.922196 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2010): Terminating (SIGTERM)
11:51:43.962060 run iperf3-srv_10.42.42.10(pid=2011): Terminating (SIGTERM)
11:51:44.002552 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2014): Terminating (SIGTERM)
11:51:44.042695 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2017): Terminating (SIGTERM)
11:51:44.082515 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2020): Terminating (SIGTERM)
11:51:44.091664 ---      ParallelTerminationStrategy: PID 2010 died...
11:51:44.145221 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2010): Terminated: ok {rc=0}
11:51:44.154841 ---      ParallelTerminationStrategy: PID 2011 died...
11:51:44.208008 run iperf3-srv_10.42.42.10(pid=2011): Terminated {rc=256}
11:51:44.217886 ---      ParallelTerminationStrategy: PID 2014 died...
11:51:44.271334 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2014): Terminated: ok {rc=0}
11:51:44.281051 ---      ParallelTerminationStrategy: PID 2017 died...
11:51:44.334862 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2017): Terminated: ok {rc=0}
11:51:44.344486 ---      ParallelTerminationStrategy: PID 2020 died...
11:51:44.397655 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2020): Terminated: ok {rc=0}
11:51:44.481754 bus                          /gobi_6: Setting Powered False
