
----------------------------------------------
trial-2360 gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py
----------------------------------------------
13:29:39.449654 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
13:29:39.461061 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1)
13:29:39.603326 tst         cs_paging_gprs_active.py: using LAC 21783
13:29:39.721809 tst         cs_paging_gprs_active.py: using RAC 108
13:29:39.838050 tst         cs_paging_gprs_active.py: using CellId 21783
13:29:39.954256 tst         cs_paging_gprs_active.py: using BVCI 21784
13:29:39.977455 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
13:29:39.988680 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
13:29:39.999781 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
13:29:40.011110 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
13:29:40.022144 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
13:29:40.033568 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
13:29:40.044798 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
13:29:40.055954 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
13:29:40.067424 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
13:29:40.180719 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
13:29:40.473792 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003...
13:29:40.607414 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
13:29:40.937434 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10499): Launched
13:29:41.211756 run iperf3-srv_10.42.42.10(pid=10500): Launched
13:29:41.407779 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004...
13:29:41.541430 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
13:29:41.871984 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10501): Launched
13:29:42.146507 run iperf3-srv_10.42.42.10(pid=10502): Launched
13:29:42.342556 tst      cs_paging_gprs_active.py:38: start network...
13:29:42.475849 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
13:29:42.985098 run         create_hlr_db(pid=10503): Launched
13:29:43.158232 bus                          /gobi_6: Setting Powered False
13:29:44.178546 run         create_hlr_db(pid=10503): Terminated: ok {rc=0}
13:29:44.603369 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10505): Launched
13:29:44.924612 run   osmo-hlr_10.42.42.2(pid=10506): Launched
13:29:45.045381 run              osmo-stp_10.42.42.5: Starting osmo-stp
13:29:45.601734 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10508): Launched
13:29:46.037750 run   osmo-stp_10.42.42.5(pid=10509): Launched
13:29:46.253363 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
13:29:46.968706 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10511): Launched
13:29:47.095595 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
13:29:47.392486 run              patchelf(pid=10512): Launched
13:29:47.579591 run   osmo-stp_10.42.42.5(pid=10509): ERR: Terminated: ERROR {rc=1}  [trial-2360↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10509)]
13:29:47.716354 run   osmo-stp_10.42.42.5(pid=10509): stdout: 
| (launched: 2022-12-09_13:29:45.763681)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
13:29:47.853207 run   osmo-stp_10.42.42.5(pid=10509): stderr: 
| [0;m[38;5;43m20221209132946037 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221209132946038 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221209132946038 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221209132946038 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209132946039 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209132946039 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209132946039 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
13:29:47.985461 run   osmo-stp_10.42.42.5(pid=10509): stdout: 
| (launched: 2022-12-09_13:29:45.763681)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
13:29:48.116756 run   osmo-stp_10.42.42.5(pid=10509): stderr: 
| [0;m[38;5;43m20221209132946037 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221209132946038 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221209132946038 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221209132946038 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209132946039 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209132946039 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209132946039 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
13:29:48.268691 run              patchelf(pid=10512): Terminating (SIGINT)
13:29:48.447541 run              patchelf(pid=10512): Terminated: ok {rc=0}
13:29:48.480399 tst      cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=10509): Process ended prematurely: osmo-stp_10.42.42.5(pid=10509) [trial-2360↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10509)]  [trial-2360↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38]
13:29:48.490531 tst      cs_paging_gprs_active.py:38: Test FAILED (9.1 sec)
13:29:48.554668 run   osmo-hlr_10.42.42.2(pid=10506): ERR: Terminated: ERROR {rc=237}  [trial-2360↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10506)]
13:29:48.607059 run   osmo-hlr_10.42.42.2(pid=10506): stdout: 
| (launched: 2022-12-09_13:29:44.766529) 
13:29:48.660558 run   osmo-hlr_10.42.42.2(pid=10506): stderr: 
| [0;m[1;31m20221209132944967 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221209132944967 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221209132944967 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221209132944967 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221209132944967 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221209132944967 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221209132944979 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2360/run.2022-12-09_12-45-57/gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221209132944987 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209132944987 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209132944987 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
13:29:48.705794 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10499): Terminating (SIGTERM)
13:29:48.747941 run iperf3-srv_10.42.42.10(pid=10500): Terminating (SIGTERM)
13:29:48.790501 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10501): Terminating (SIGTERM)
13:29:48.833214 run iperf3-srv_10.42.42.10(pid=10502): Terminating (SIGTERM)
13:29:48.875463 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10505): Terminating (SIGTERM)
13:29:48.918276 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10508): Terminating (SIGTERM)
13:29:48.960620 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10511): Terminating (SIGTERM)
13:29:48.970072 ---      ParallelTerminationStrategy: PID 10499 died...
13:29:49.026701 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10499): Terminated: ok {rc=0}
13:29:49.037198 ---      ParallelTerminationStrategy: PID 10500 died...
13:29:49.093196 run iperf3-srv_10.42.42.10(pid=10500): Terminated {rc=256}
13:29:49.103565 ---      ParallelTerminationStrategy: PID 10501 died...
13:29:49.159795 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10501): Terminated: ok {rc=0}
13:29:49.169796 ---      ParallelTerminationStrategy: PID 10502 died...
13:29:49.225871 run iperf3-srv_10.42.42.10(pid=10502): Terminated {rc=256}
13:29:49.235853 ---      ParallelTerminationStrategy: PID 10505 died...
13:29:49.292014 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10505): Terminated: ok {rc=0}
13:29:49.302424 ---      ParallelTerminationStrategy: PID 10508 died...
13:29:49.359101 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10508): Terminated: ok {rc=0}
13:29:49.369405 ---      ParallelTerminationStrategy: PID 10511 died...
13:29:49.425512 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10511): Terminated: ok {rc=0}
13:29:49.515932 bus                          /gobi_0: Setting Powered False
13:29:50.619832 bus                          /gobi_0: Setting Powered False
13:29:51.730174 bus                          /gobi_6: Setting Powered False
