
----------------------------------------------
trial-2361 gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo cs_paging_gprs_active.py
----------------------------------------------
16:36:11.311652 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
16:36:11.322974 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1)
16:36:11.485486 tst         cs_paging_gprs_active.py: using LAC 22328
16:36:11.612423 tst         cs_paging_gprs_active.py: using RAC 143
16:36:11.740723 tst         cs_paging_gprs_active.py: using CellId 22328
16:36:11.866273 tst         cs_paging_gprs_active.py: using BVCI 22329
16:36:11.890943 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
16:36:11.902798 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
16:36:11.914216 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
16:36:11.925851 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
16:36:11.937769 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
16:36:11.949545 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
16:36:11.961811 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
16:36:11.973309 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
16:36:11.985095 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4)
16:36:12.106112 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4)
16:36:12.402847 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003...
16:36:12.539070 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
16:36:12.875515 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23093): Launched
16:36:13.157171 run iperf3-srv_10.42.42.10(pid=23094): Launched
16:36:13.357743 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004...
16:36:13.494308 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
16:36:13.831444 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23095): Launched
16:36:14.114704 run iperf3-srv_10.42.42.10(pid=23096): Launched
16:36:14.314335 tst      cs_paging_gprs_active.py:38: start network...
16:36:14.450477 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
16:36:14.961308 run         create_hlr_db(pid=23097): Launched
16:36:15.148842 bus                          /gobi_6: Setting Powered False
16:36:16.170357 run         create_hlr_db(pid=23097): Terminated: ok {rc=0}
16:36:16.612818 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23099): Launched
16:36:17.032107 run   osmo-hlr_10.42.42.2(pid=23100): Launched
16:36:17.231871 run              osmo-stp_10.42.42.5: Starting osmo-stp
16:36:17.798236 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23102): Launched
16:36:18.125017 run   osmo-stp_10.42.42.5(pid=23103): Launched
16:36:18.242592 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
16:36:18.807816 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23105): Launched
16:36:18.923588 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
16:36:19.215113 run              patchelf(pid=23106): Launched
16:36:19.406285 run   osmo-stp_10.42.42.5(pid=23103): ERR: Terminated: ERROR {rc=1}  [trial-2361↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23103)]
16:36:19.546569 run   osmo-stp_10.42.42.5(pid=23103): stdout: 
| (launched: 2022-12-09_16:36:17.963336)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
16:36:19.686973 run   osmo-stp_10.42.42.5(pid=23103): stderr: 
| [0;m[38;5;43m20221209163618152 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221209163618152 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221209163618153 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221209163618153 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209163618154 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209163618154 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209163618154 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
16:36:19.821942 run   osmo-stp_10.42.42.5(pid=23103): stdout: 
| (launched: 2022-12-09_16:36:17.963336)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
16:36:19.955591 run   osmo-stp_10.42.42.5(pid=23103): stderr: 
| [0;m[38;5;43m20221209163618152 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221209163618152 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221209163618153 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221209163618153 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209163618154 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209163618154 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209163618154 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
16:36:20.111523 run              patchelf(pid=23106): Terminating (SIGINT)
16:36:20.294428 run              patchelf(pid=23106): Terminated: ok {rc=0}
16:36:20.327928 tst      cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=23103): Process ended prematurely: osmo-stp_10.42.42.5(pid=23103) [trial-2361↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23103)]  [trial-2361↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38]
16:36:20.337902 tst      cs_paging_gprs_active.py:38: Test FAILED (9.1 sec)
16:36:20.401598 run   osmo-hlr_10.42.42.2(pid=23100): ERR: Terminated: ERROR {rc=237}  [trial-2361↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=23100)]
16:36:20.452917 run   osmo-hlr_10.42.42.2(pid=23100): stdout: 
| (launched: 2022-12-09_16:36:16.769267) 
16:36:20.504843 run   osmo-hlr_10.42.42.2(pid=23100): stderr: 
| [0;m[1;31m20221209163617108 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221209163617118 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221209163617119 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221209163617119 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221209163617119 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221209163617119 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221209163617130 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2361/run.2022-12-09_15-36-58/gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221209163617138 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209163617138 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209163617138 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
16:36:20.548814 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23093): Terminating (SIGTERM)
16:36:20.590534 run iperf3-srv_10.42.42.10(pid=23094): Terminating (SIGTERM)
16:36:20.632556 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23095): Terminating (SIGTERM)
16:36:20.674590 run iperf3-srv_10.42.42.10(pid=23096): Terminating (SIGTERM)
16:36:20.716077 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23099): Terminating (SIGTERM)
16:36:20.757922 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23102): Terminating (SIGTERM)
16:36:20.799656 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23105): Terminating (SIGTERM)
16:36:20.809601 ---      ParallelTerminationStrategy: PID 23093 died...
16:36:20.865304 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23093): Terminated: ok {rc=0}
16:36:20.875463 ---      ParallelTerminationStrategy: PID 23094 died...
16:36:20.930728 run iperf3-srv_10.42.42.10(pid=23094): Terminated {rc=256}
16:36:20.940867 ---      ParallelTerminationStrategy: PID 23095 died...
16:36:20.995900 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23095): Terminated: ok {rc=0}
16:36:21.006203 ---      ParallelTerminationStrategy: PID 23096 died...
16:36:21.061196 run iperf3-srv_10.42.42.10(pid=23096): Terminated {rc=256}
16:36:21.071487 ---      ParallelTerminationStrategy: PID 23099 died...
16:36:21.127122 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23099): Terminated: ok {rc=0}
16:36:21.137136 ---      ParallelTerminationStrategy: PID 23102 died...
16:36:21.192521 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23102): Terminated: ok {rc=0}
16:36:21.202731 ---      ParallelTerminationStrategy: PID 23105 died...
16:36:21.257908 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23105): Terminated: ok {rc=0}
16:36:21.344566 bus                          /gobi_0: Setting Powered False
16:36:22.449203 bus                          /gobi_0: Setting Powered False
16:36:23.556674 bus                          /gobi_6: Setting Powered False
