
----------------------------------------------
trial-2362 gprs:nanobts+band-900+mod-bts0-dynts-ipa ping_idle_ping.py
----------------------------------------------
18:22:39.197334 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
18:22:39.209279 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1)
18:22:39.372767 tst                ping_idle_ping.py: using LAC 22859
18:22:39.490889 tst                ping_idle_ping.py: using RAC 164
18:22:39.606206 tst                ping_idle_ping.py: using CellId 22859
18:22:39.725191 tst                ping_idle_ping.py: using BVCI 22860
18:22:39.747827 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
18:22:39.758943 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
18:22:39.769909 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
18:22:39.781240 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
18:22:39.792316 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
18:22:39.803534 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
18:22:39.814735 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
18:22:39.825800 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4)
18:22:40.113258 tst             ping_idle_ping.py:24: start network...
18:22:40.246826 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
18:22:40.756917 run           create_hlr_db(pid=480): Launched
18:22:40.941289 bus                          /gobi_6: Setting Powered False
18:22:41.961508 run           create_hlr_db(pid=480): Terminated: ok {rc=0}
18:22:42.384855 run pcap-recorder_any(filters='host 10.42.42.2')(pid=482): Launched
18:22:42.701154 run     osmo-hlr_10.42.42.2(pid=483): Launched
18:22:42.820579 run              osmo-stp_10.42.42.5: Starting osmo-stp
18:22:43.370638 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=485): Launched
18:22:43.686901 run     osmo-stp_10.42.42.5(pid=486): Launched
18:22:43.800899 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
18:22:44.354199 run pcap-recorder_any(filters='host 10.42.42.6')(pid=488): Launched
18:22:44.467025 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
18:22:44.742868 run                patchelf(pid=489): Launched
18:22:44.928056 run     osmo-stp_10.42.42.5(pid=486): ERR: Terminated: ERROR {rc=1}  [trial-2362↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=486)]
18:22:45.063999 run     osmo-stp_10.42.42.5(pid=486): stdout: 
| (launched: 2022-12-09_18:22:43.531485)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
18:22:45.200781 run     osmo-stp_10.42.42.5(pid=486): stderr: 
| [0;m[38;5;43m20221209182243724 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221209182243724 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221209182243724 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221209182243724 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209182243725 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209182243725 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209182243725 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
18:22:45.332121 run     osmo-stp_10.42.42.5(pid=486): stdout: 
| (launched: 2022-12-09_18:22:43.531485)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
18:22:45.461917 run     osmo-stp_10.42.42.5(pid=486): stderr: 
| [0;m[38;5;43m20221209182243724 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221209182243724 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221209182243724 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221209182243724 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209182243725 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209182243725 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209182243725 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
18:22:45.612766 run                patchelf(pid=489): Terminating (SIGINT)
18:22:45.790562 run                patchelf(pid=489): Terminated: ok {rc=0}
18:22:45.822842 tst             ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=486): Process ended prematurely: osmo-stp_10.42.42.5(pid=486) [trial-2362↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=486)]  [trial-2362↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪ping_idle_ping.py:27]
18:22:45.837397 tst             ping_idle_ping.py:27: Test FAILED (6.6 sec)
18:22:45.902882 run     osmo-hlr_10.42.42.2(pid=483): ERR: Terminated: ERROR {rc=237}  [trial-2362↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=483)]
18:22:45.955370 run     osmo-hlr_10.42.42.2(pid=483): stdout: 
| (launched: 2022-12-09_18:22:42.545897) 
18:22:46.008691 run     osmo-hlr_10.42.42.2(pid=483): stderr: 
| [0;m[1;31m20221209182242745 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221209182242745 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221209182242745 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221209182242745 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221209182242745 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221209182242745 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221209182242757 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2362/run.2022-12-09_17-10-07/gprs:nanobts+band-900+mod-bts0-dynts-ipa/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221209182242766 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209182242766 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209182242766 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
18:22:46.054128 run pcap-recorder_any(filters='host 10.42.42.2')(pid=482): Terminating (SIGTERM)
18:22:46.099148 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=485): Terminating (SIGTERM)
18:22:46.142467 run pcap-recorder_any(filters='host 10.42.42.6')(pid=488): Terminating (SIGTERM)
18:22:46.152330 ---      ParallelTerminationStrategy: PID 482 died...
18:22:46.210255 run pcap-recorder_any(filters='host 10.42.42.2')(pid=482): Terminated: ok {rc=0}
18:22:46.220838 ---      ParallelTerminationStrategy: PID 485 died...
18:22:46.277952 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=485): Terminated: ok {rc=0}
18:22:46.288512 ---      ParallelTerminationStrategy: PID 488 died...
18:22:46.345518 run pcap-recorder_any(filters='host 10.42.42.6')(pid=488): Terminated: ok {rc=0}
18:22:46.435179 bus                          /gobi_6: Setting Powered False
