
----------------------------------------------
trial-2362 gprs:trx-sysmocell5000+mod-bts0-egprs iperf3.py
----------------------------------------------
17:42:41.650994 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
17:42:41.663030 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x bts (candidates: 1)
17:42:41.806036 tst                        iperf3.py: using LAC 22647
17:42:41.925262 tst                        iperf3.py: using RAC 207
17:42:42.044516 tst                        iperf3.py: using CellId 22647
17:42:42.165551 tst                        iperf3.py: using BVCI 22648
17:42:42.188784 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
17:42:42.199700 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
17:42:42.210472 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
17:42:42.221522 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
17:42:42.232383 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
17:42:42.243283 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
17:42:42.254416 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
17:42:42.266000 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
17:42:42.276852 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4)
17:42:42.570682 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
17:42:42.706623 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
17:42:43.044086 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29029): Launched
17:42:43.325957 run iperf3-srv_10.42.42.10(pid=29030): Launched
17:42:43.525286 tst                      iperf3.py:8: start network...
17:42:43.660780 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
17:42:44.182509 run         create_hlr_db(pid=29031): Launched
17:42:44.370657 bus                          /gobi_6: Setting Powered False
17:42:45.390508 run         create_hlr_db(pid=29031): Terminated: ok {rc=0}
17:42:45.803550 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29033): Launched
17:42:46.190304 run   osmo-hlr_10.42.42.2(pid=29034): Launched
17:42:46.334855 run              osmo-stp_10.42.42.5: Starting osmo-stp
17:42:47.038811 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29036): Launched
17:42:47.416893 run   osmo-stp_10.42.42.5(pid=29037): Launched
17:42:47.538476 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
17:42:48.104702 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29039): Launched
17:42:48.220295 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
17:42:48.504579 run              patchelf(pid=29040): Launched
17:42:48.695256 run   osmo-stp_10.42.42.5(pid=29037): ERR: Terminated: ERROR {rc=1}  [trial-2362↪gprs:trx-sysmocell5000+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29037)]
17:42:48.834455 run   osmo-stp_10.42.42.5(pid=29037): stdout: 
| (launched: 2022-12-09_17:42:47.207838)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
17:42:48.973724 run   osmo-stp_10.42.42.5(pid=29037): stderr: 
| [0;m[38;5;43m20221209174247438 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221209174247439 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221209174247439 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221209174247439 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209174247440 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209174247440 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209174247440 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
17:42:49.109216 run   osmo-stp_10.42.42.5(pid=29037): stdout: 
| (launched: 2022-12-09_17:42:47.207838)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
17:42:49.242985 run   osmo-stp_10.42.42.5(pid=29037): stderr: 
| [0;m[38;5;43m20221209174247438 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221209174247439 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221209174247439 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221209174247439 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209174247440 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209174247440 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209174247440 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
17:42:49.398100 run              patchelf(pid=29040): Terminating (SIGINT)
17:42:49.580235 run              patchelf(pid=29040): Terminated: ok {rc=0}
17:42:49.613964 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=29037): Process ended prematurely: osmo-stp_10.42.42.5(pid=29037) [trial-2362↪gprs:trx-sysmocell5000+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29037)]  [trial-2362↪gprs:trx-sysmocell5000+mod-bts0-egprs↪iperf3.py:8]
17:42:49.624037 tst                      iperf3.py:8: Test FAILED (8.0 sec)
17:42:49.686889 run   osmo-hlr_10.42.42.2(pid=29034): ERR: Terminated: ERROR {rc=237}  [trial-2362↪gprs:trx-sysmocell5000+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=29034)]
17:42:49.738286 run   osmo-hlr_10.42.42.2(pid=29034): stdout: 
| (launched: 2022-12-09_17:42:45.977387) 
17:42:49.790826 run   osmo-hlr_10.42.42.2(pid=29034): stderr: 
| [0;m[1;31m20221209174246295 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221209174246295 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221209174246295 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221209174246295 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221209174246295 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221209174246295 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221209174246315 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2362/run.2022-12-09_17-10-07/gprs:trx-sysmocell5000+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221209174246336 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209174246336 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209174246336 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
17:42:49.835411 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29029): Terminating (SIGTERM)
17:42:49.877621 run iperf3-srv_10.42.42.10(pid=29030): Terminating (SIGTERM)
17:42:49.919815 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29033): Terminating (SIGTERM)
17:42:49.962151 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29036): Terminating (SIGTERM)
17:42:50.004536 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29039): Terminating (SIGTERM)
17:42:50.014295 ---      ParallelTerminationStrategy: PID 29029 died...
17:42:50.070457 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29029): Terminated: ok {rc=0}
17:42:50.080506 ---      ParallelTerminationStrategy: PID 29030 died...
17:42:50.136359 run iperf3-srv_10.42.42.10(pid=29030): Terminated {rc=256}
17:42:50.146448 ---      ParallelTerminationStrategy: PID 29033 died...
17:42:50.202759 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29033): Terminated: ok {rc=0}
17:42:50.212930 ---      ParallelTerminationStrategy: PID 29036 died...
17:42:50.269038 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29036): Terminated: ok {rc=0}
17:42:50.279108 ---      ParallelTerminationStrategy: PID 29039 died...
17:42:50.335537 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29039): Terminated: ok {rc=0}
17:42:50.424855 bus                          /gobi_6: Setting Powered False
