
----------------------------------------------
trial-2363 gprs:nanobts+band-1900+mod-bts0-egprs ping_idle_ping.py
----------------------------------------------
19:42:34.445128 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
19:42:34.457234 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x bts (candidates: 1)
19:42:34.589309 tst                ping_idle_ping.py: using LAC 23282
19:42:34.705358 tst                ping_idle_ping.py: using RAC 77
19:42:34.821700 tst                ping_idle_ping.py: using CellId 23282
19:42:34.943371 tst                ping_idle_ping.py: using BVCI 23283
19:42:34.966527 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
19:42:34.977723 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
19:42:34.988465 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
19:42:34.999224 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
19:42:35.009954 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
19:42:35.020619 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
19:42:35.031547 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
19:42:35.042303 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x modem (candidates: 4)
19:42:35.338735 tst             ping_idle_ping.py:24: start network...
19:42:35.474106 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
19:42:35.998091 run          create_hlr_db(pid=8038): Launched
19:42:36.173968 bus                          /gobi_6: Setting Powered False
19:42:37.195213 run          create_hlr_db(pid=8038): Terminated: ok {rc=0}
19:42:37.598538 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8040): Launched
19:42:37.900724 run    osmo-hlr_10.42.42.2(pid=8041): Launched
19:42:38.019768 run              osmo-stp_10.42.42.5: Starting osmo-stp
19:42:38.550970 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8043): Launched
19:42:38.853171 run    osmo-stp_10.42.42.5(pid=8044): Launched
19:42:38.962916 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
19:42:39.489581 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8046): Launched
19:42:39.597386 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
19:42:39.860322 run               patchelf(pid=8047): Launched
19:42:40.037088 run    osmo-stp_10.42.42.5(pid=8044): ERR: Terminated: ERROR {rc=1}  [trial-2363↪gprs:nanobts+band-1900+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8044)]
19:42:40.166011 run    osmo-stp_10.42.42.5(pid=8044): stdout: 
| (launched: 2022-12-09_19:42:38.704650)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
19:42:40.296030 run    osmo-stp_10.42.42.5(pid=8044): stderr: 
| [0;m[38;5;43m20221209194238874 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221209194238874 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221209194238874 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221209194238875 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209194238875 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209194238875 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209194238876 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
19:42:40.420836 run    osmo-stp_10.42.42.5(pid=8044): stdout: 
| (launched: 2022-12-09_19:42:38.704650)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
19:42:40.544511 run    osmo-stp_10.42.42.5(pid=8044): stderr: 
| [0;m[38;5;43m20221209194238874 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221209194238874 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221209194238874 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221209194238875 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209194238875 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209194238875 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209194238876 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
19:42:40.688729 run               patchelf(pid=8047): Terminating (SIGINT)
19:42:40.857701 run               patchelf(pid=8047): Terminated: ok {rc=0}
19:42:40.888538 tst             ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=8044): Process ended prematurely: osmo-stp_10.42.42.5(pid=8044) [trial-2363↪gprs:nanobts+band-1900+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8044)]  [trial-2363↪gprs:nanobts+band-1900+mod-bts0-egprs↪ping_idle_ping.py:27]
19:42:40.897174 tst             ping_idle_ping.py:27: Test FAILED (6.4 sec)
19:42:40.956187 run    osmo-hlr_10.42.42.2(pid=8041): ERR: Terminated: ERROR {rc=237}  [trial-2363↪gprs:nanobts+band-1900+mod-bts0-egprs↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8041)]
19:42:41.004112 run    osmo-hlr_10.42.42.2(pid=8041): stdout: 
| (launched: 2022-12-09_19:42:37.752415) 
19:42:41.052545 run    osmo-hlr_10.42.42.2(pid=8041): stderr: 
| [0;m[1;31m20221209194237928 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221209194237928 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221209194237928 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221209194237928 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221209194237928 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221209194237928 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221209194237940 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2363/run.2022-12-09_18-37-22/gprs:nanobts+band-1900+mod-bts0-egprs/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221209194237949 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209194237949 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209194237949 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
19:42:41.093844 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8040): Terminating (SIGTERM)
19:42:41.132980 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8043): Terminating (SIGTERM)
19:42:41.171933 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8046): Terminating (SIGTERM)
19:42:41.181133 ---      ParallelTerminationStrategy: PID 8040 died...
19:42:41.233509 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8040): Terminated: ok {rc=0}
19:42:41.243073 ---      ParallelTerminationStrategy: PID 8043 died...
19:42:41.295458 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8043): Terminated: ok {rc=0}
19:42:41.305053 ---      ParallelTerminationStrategy: PID 8046 died...
19:42:41.357329 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8046): Terminated: ok {rc=0}
19:42:41.439556 bus                          /gobi_6: Setting Powered False
