
----------------------------------------------
trial-2363 gprs:nanobts+band-900 ping.py
----------------------------------------------
19:47:40.649871 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
19:47:40.661149 tst            gprs:nanobts+band-900: Using 1 x bts (candidates: 1)
19:47:40.796929 tst                          ping.py: using LAC 23309
19:47:40.917560 tst                          ping.py: using RAC 104
19:47:41.035745 tst                          ping.py: using CellId 23309
19:47:41.158825 tst                          ping.py: using BVCI 23310
19:47:41.181904 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
19:47:41.192522 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
19:47:41.203100 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
19:47:41.213627 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
19:47:41.224031 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
19:47:41.234441 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
19:47:41.244905 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
19:47:41.255820 tst            gprs:nanobts+band-900: Using 1 x modem (candidates: 4)
19:47:41.549655 tst                       ping.py:19: start network...
19:47:41.685284 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
19:47:42.196285 run          create_hlr_db(pid=8391): Launched
19:47:42.385088 bus                          /gobi_6: Setting Powered False
19:47:43.404562 run          create_hlr_db(pid=8391): Terminated: ok {rc=0}
19:47:43.810436 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8393): Launched
19:47:44.113256 run    osmo-hlr_10.42.42.2(pid=8394): Launched
19:47:44.224019 run              osmo-stp_10.42.42.5: Starting osmo-stp
19:47:44.750449 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8396): Launched
19:47:45.052821 run    osmo-stp_10.42.42.5(pid=8397): Launched
19:47:45.162305 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
19:47:45.687597 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8399): Launched
19:47:45.794510 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
19:47:46.105213 run               patchelf(pid=8400): Launched
19:47:46.284904 run    osmo-stp_10.42.42.5(pid=8397): ERR: Terminated: ERROR {rc=1}  [trial-2363↪gprs:nanobts+band-900↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8397)]
19:47:46.416488 run    osmo-stp_10.42.42.5(pid=8397): stdout: 
| (launched: 2022-12-09_19:47:44.904001)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
19:47:46.547946 run    osmo-stp_10.42.42.5(pid=8397): stderr: 
| [0;m[38;5;43m20221209194745075 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221209194745075 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221209194745075 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221209194745076 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209194745076 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209194745076 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209194745076 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
19:47:46.676017 run    osmo-stp_10.42.42.5(pid=8397): stdout: 
| (launched: 2022-12-09_19:47:44.904001)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
19:47:46.802939 run    osmo-stp_10.42.42.5(pid=8397): stderr: 
| [0;m[38;5;43m20221209194745075 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221209194745075 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221209194745075 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221209194745076 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209194745076 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209194745076 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209194745076 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
19:47:46.949362 run               patchelf(pid=8400): Terminating (SIGINT)
19:47:47.121837 run               patchelf(pid=8400): Terminated: ok {rc=0}
19:47:47.153133 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=8397): Process ended prematurely: osmo-stp_10.42.42.5(pid=8397) [trial-2363↪gprs:nanobts+band-900↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8397)]  [trial-2363↪gprs:nanobts+band-900↪ping.py:22]
19:47:47.162405 tst                       ping.py:22: Test FAILED (6.5 sec)
19:47:47.227714 run    osmo-hlr_10.42.42.2(pid=8394): ERR: Terminated: ERROR {rc=237}  [trial-2363↪gprs:nanobts+band-900↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8394)]
19:47:47.275963 run    osmo-hlr_10.42.42.2(pid=8394): stdout: 
| (launched: 2022-12-09_19:47:43.964307) 
19:47:47.324684 run    osmo-hlr_10.42.42.2(pid=8394): stderr: 
| [0;m[1;31m20221209194744143 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221209194744143 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221209194744143 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221209194744143 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221209194744143 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221209194744143 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221209194744155 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2363/run.2022-12-09_18-37-22/gprs:nanobts+band-900/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221209194744164 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209194744164 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209194744165 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
19:47:47.366337 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8393): Terminating (SIGTERM)
19:47:47.406123 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8396): Terminating (SIGTERM)
19:47:47.445172 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8399): Terminating (SIGTERM)
19:47:47.454358 ---      ParallelTerminationStrategy: PID 8393 died...
19:47:47.507335 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8393): Terminated: ok {rc=0}
19:47:47.517032 ---      ParallelTerminationStrategy: PID 8396 died...
19:47:47.569242 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8396): Terminated: ok {rc=0}
19:47:47.578777 ---      ParallelTerminationStrategy: PID 8399 died...
19:47:47.631091 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8399): Terminated: ok {rc=0}
19:47:47.718611 bus                          /gobi_6: Setting Powered False
