
----------------------------------------------
trial-2364 dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo switch_tch_pdch.py
----------------------------------------------
21:05:11.602470 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
21:05:11.613536 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x bts (candidates: 1)
21:05:11.770166 tst               switch_tch_pdch.py: using LAC 23717
21:05:11.894734 tst               switch_tch_pdch.py: using RAC 2
21:05:12.023955 tst               switch_tch_pdch.py: using CellId 23717
21:05:12.147157 tst               switch_tch_pdch.py: using BVCI 23718
21:05:12.171635 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
21:05:12.183220 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
21:05:12.194649 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
21:05:12.206095 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
21:05:12.217571 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
21:05:12.228842 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
21:05:12.240574 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
21:05:12.251896 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2)
21:05:12.372898 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2)
21:05:12.663321 tst            switch_tch_pdch.py:51: start network...
21:05:12.795923 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
21:05:13.277728 run         create_hlr_db(pid=14981): Launched
21:05:13.406785 bus                          /gobi_6: Setting Powered False
21:05:14.482556 run         create_hlr_db(pid=14981): Terminated: ok {rc=0}
21:05:14.857249 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14983): Launched
21:05:15.155000 run   osmo-hlr_10.42.42.2(pid=14984): Launched
21:05:15.264846 run              osmo-stp_10.42.42.5: Starting osmo-stp
21:05:15.756782 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14986): Launched
21:05:16.112927 run   osmo-stp_10.42.42.5(pid=14987): Launched
21:05:16.296453 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
21:05:16.829926 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14989): Launched
21:05:16.939496 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
21:05:17.222582 run              patchelf(pid=14990): Launched
21:05:17.403245 run   osmo-stp_10.42.42.5(pid=14987): ERR: Terminated: ERROR {rc=1}  [trial-2364↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14987)]
21:05:17.530971 run   osmo-stp_10.42.42.5(pid=14987): stdout: 
| (launched: 2022-12-09_21:05:15.915855)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
21:05:17.659352 run   osmo-stp_10.42.42.5(pid=14987): stderr: 
| [0;m[38;5;43m20221209210516264 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221209210516264 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221209210516264 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221209210516264 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209210516269 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209210516269 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209210516269 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
21:05:17.782762 run   osmo-stp_10.42.42.5(pid=14987): stdout: 
| (launched: 2022-12-09_21:05:15.915855)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
21:05:17.905210 run   osmo-stp_10.42.42.5(pid=14987): stderr: 
| [0;m[38;5;43m20221209210516264 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221209210516264 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221209210516264 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221209210516264 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209210516269 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209210516269 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209210516269 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
21:05:18.047388 run              patchelf(pid=14990): Terminating (SIGINT)
21:05:18.214497 run              patchelf(pid=14990): Terminated: ok {rc=0}
21:05:18.245105 tst            switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=14987): Process ended prematurely: osmo-stp_10.42.42.5(pid=14987) [trial-2364↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14987)]  [trial-2364↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54]
21:05:18.253974 tst            switch_tch_pdch.py:54: Test FAILED (6.6 sec)
21:05:18.314288 run   osmo-hlr_10.42.42.2(pid=14984): ERR: Terminated: ERROR {rc=237}  [trial-2364↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=14984)]
21:05:18.363143 run   osmo-hlr_10.42.42.2(pid=14984): stdout: 
| (launched: 2022-12-09_21:05:15.008269) 
21:05:18.412649 run   osmo-hlr_10.42.42.2(pid=14984): stderr: 
| [0;m[1;31m20221209210515183 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221209210515183 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221209210515183 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221209210515184 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221209210515184 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221209210515184 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221209210515197 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2364/run.2022-12-09_20-04-44/dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221209210515207 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209210515207 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209210515207 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
21:05:18.454445 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14983): Terminating (SIGTERM)
21:05:18.493944 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14986): Terminating (SIGTERM)
21:05:18.533529 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14989): Terminating (SIGTERM)
21:05:18.542987 ---      ParallelTerminationStrategy: PID 14983 died...
21:05:18.595827 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14983): Terminated: ok {rc=0}
21:05:18.605552 ---      ParallelTerminationStrategy: PID 14986 died...
21:05:18.658261 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14986): Terminated: ok {rc=0}
21:05:18.667945 ---      ParallelTerminationStrategy: PID 14989 died...
21:05:18.720927 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14989): Terminated: ok {rc=0}
21:05:18.803549 bus                          /gobi_0: Setting Powered False
21:05:19.903573 bus                          /gobi_0: Setting Powered False
21:05:21.008824 bus                          /gobi_6: Setting Powered False
