
----------------------------------------------
trial-2364 gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py
----------------------------------------------
20:48:16.189752 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
20:48:16.202000 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1)
20:48:16.344504 tst         cs_paging_gprs_active.py: using LAC 23627
20:48:16.473253 tst         cs_paging_gprs_active.py: using RAC 167
20:48:16.619179 tst         cs_paging_gprs_active.py: using CellId 23627
20:48:16.782350 tst         cs_paging_gprs_active.py: using BVCI 23628
20:48:16.816456 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
20:48:16.831101 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
20:48:16.844590 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
20:48:16.858051 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
20:48:16.871249 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
20:48:16.884221 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
20:48:16.896558 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
20:48:16.910738 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
20:48:16.924670 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
20:48:17.052412 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
20:48:17.354237 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003...
20:48:17.488897 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
20:48:17.821655 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13483): Launched
20:48:18.097092 run iperf3-srv_10.42.42.10(pid=13484): Launched
20:48:18.294423 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004...
20:48:18.428794 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
20:48:18.761253 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13485): Launched
20:48:19.036206 run iperf3-srv_10.42.42.10(pid=13486): Launched
20:48:19.232836 tst      cs_paging_gprs_active.py:38: start network...
20:48:19.367076 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
20:48:19.879330 run         create_hlr_db(pid=13487): Launched
20:48:20.064718 bus                          /gobi_6: Setting Powered False
20:48:21.085190 run         create_hlr_db(pid=13487): Terminated: ok {rc=0}
20:48:21.486807 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13489): Launched
20:48:21.787679 run   osmo-hlr_10.42.42.2(pid=13490): Launched
20:48:21.905135 run              osmo-stp_10.42.42.5: Starting osmo-stp
20:48:22.430402 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13492): Launched
20:48:22.729134 run   osmo-stp_10.42.42.5(pid=13493): Launched
20:48:22.838792 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
20:48:23.359761 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13495): Launched
20:48:23.466554 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
20:48:23.727458 run              patchelf(pid=13496): Launched
20:48:23.902620 run   osmo-stp_10.42.42.5(pid=13493): ERR: Terminated: ERROR {rc=1}  [trial-2364↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13493)]
20:48:24.031028 run   osmo-stp_10.42.42.5(pid=13493): stdout: 
| (launched: 2022-12-09_20:48:22.582258)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
20:48:24.159282 run   osmo-stp_10.42.42.5(pid=13493): stderr: 
| [0;m[38;5;43m20221209204822753 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221209204822753 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221209204822753 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221209204822754 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209204822755 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209204822755 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209204822755 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
20:48:24.282912 run   osmo-stp_10.42.42.5(pid=13493): stdout: 
| (launched: 2022-12-09_20:48:22.582258)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
20:48:24.405811 run   osmo-stp_10.42.42.5(pid=13493): stderr: 
| [0;m[38;5;43m20221209204822753 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221209204822753 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221209204822753 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221209204822754 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209204822755 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209204822755 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209204822755 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
20:48:24.549522 run              patchelf(pid=13496): Terminating (SIGINT)
20:48:24.717674 run              patchelf(pid=13496): Terminated: ok {rc=0}
20:48:24.748679 tst      cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=13493): Process ended prematurely: osmo-stp_10.42.42.5(pid=13493) [trial-2364↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13493)]  [trial-2364↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38]
20:48:24.758075 tst      cs_paging_gprs_active.py:38: Test FAILED (8.6 sec)
20:48:24.817768 run   osmo-hlr_10.42.42.2(pid=13490): ERR: Terminated: ERROR {rc=237}  [trial-2364↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=13490)]
20:48:24.866654 run   osmo-hlr_10.42.42.2(pid=13490): stdout: 
| (launched: 2022-12-09_20:48:21.640261) 
20:48:24.916241 run   osmo-hlr_10.42.42.2(pid=13490): stderr: 
| [0;m[1;31m20221209204821815 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221209204821815 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221209204821815 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221209204821815 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221209204821815 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221209204821815 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221209204821830 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2364/run.2022-12-09_20-04-44/gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221209204821841 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209204821841 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209204821842 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
20:48:24.957809 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13483): Terminating (SIGTERM)
20:48:24.997248 run iperf3-srv_10.42.42.10(pid=13484): Terminating (SIGTERM)
20:48:25.036932 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13485): Terminating (SIGTERM)
20:48:25.076212 run iperf3-srv_10.42.42.10(pid=13486): Terminating (SIGTERM)
20:48:25.115594 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13489): Terminating (SIGTERM)
20:48:25.154860 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13492): Terminating (SIGTERM)
20:48:25.194231 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13495): Terminating (SIGTERM)
20:48:25.203451 ---      ParallelTerminationStrategy: PID 13483 died...
20:48:25.256118 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13483): Terminated: ok {rc=0}
20:48:25.265953 ---      ParallelTerminationStrategy: PID 13484 died...
20:48:25.318032 run iperf3-srv_10.42.42.10(pid=13484): Terminated {rc=256}
20:48:25.327630 ---      ParallelTerminationStrategy: PID 13485 died...
20:48:25.379354 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13485): Terminated: ok {rc=0}
20:48:25.389000 ---      ParallelTerminationStrategy: PID 13486 died...
20:48:25.440875 run iperf3-srv_10.42.42.10(pid=13486): Terminated {rc=256}
20:48:25.450333 ---      ParallelTerminationStrategy: PID 13489 died...
20:48:25.502748 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13489): Terminated: ok {rc=0}
20:48:25.512224 ---      ParallelTerminationStrategy: PID 13492 died...
20:48:25.564486 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13492): Terminated: ok {rc=0}
20:48:25.574212 ---      ParallelTerminationStrategy: PID 13495 died...
20:48:25.626024 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13495): Terminated: ok {rc=0}
20:48:25.708616 bus                          /gobi_0: Setting Powered False
20:48:26.810016 bus                          /gobi_0: Setting Powered False
20:48:27.918684 bus                          /gobi_6: Setting Powered False
