
----------------------------------------------
trial-2365 gprs:nanobts+band-900 iperf3m4.py
----------------------------------------------
22:54:23.149542 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
22:54:23.161152 tst            gprs:nanobts+band-900: Using 1 x bts (candidates: 1)
22:54:23.304924 tst                      iperf3m4.py: using LAC 24230
22:54:23.432916 tst                      iperf3m4.py: using RAC 5
22:54:23.560910 tst                      iperf3m4.py: using CellId 24230
22:54:23.687190 tst                      iperf3m4.py: using BVCI 24231
22:54:23.711987 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
22:54:23.723158 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
22:54:23.734080 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
22:54:23.744801 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
22:54:23.755734 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
22:54:23.767012 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
22:54:23.778245 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
22:54:23.789050 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
22:54:23.800227 tst            gprs:nanobts+band-900: Using 1 x modem (candidates: 4)
22:54:23.920189 tst            gprs:nanobts+band-900: Using 1 x modem (candidates: 4)
22:54:24.039515 tst            gprs:nanobts+band-900: Using 1 x modem (candidates: 4)
22:54:24.158513 tst            gprs:nanobts+band-900: Using 1 x modem (candidates: 4)
22:54:24.436893 tst                    iperf3m4.py:8: start iperfv3 server 10.42.42.10:5003...
22:54:24.562990 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
22:54:24.876234 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27037): Launched
22:54:25.135804 run iperf3-srv_10.42.42.10(pid=27038): Launched
22:54:25.319494 tst                    iperf3m4.py:8: start iperfv3 server 10.42.42.10:5004...
22:54:25.444845 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
22:54:25.757060 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27039): Launched
22:54:26.015953 run iperf3-srv_10.42.42.10(pid=27040): Launched
22:54:26.199460 tst                    iperf3m4.py:8: start iperfv3 server 10.42.42.10:5005...
22:54:26.324543 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
22:54:26.635620 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27041): Launched
22:54:26.893912 run iperf3-srv_10.42.42.10(pid=27042): Launched
22:54:27.076318 tst                    iperf3m4.py:8: start iperfv3 server 10.42.42.10:5006...
22:54:27.201175 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
22:54:27.513063 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27043): Launched
22:54:27.774100 run iperf3-srv_10.42.42.10(pid=27044): Launched
22:54:27.958708 tst                    iperf3m4.py:8: start network...
22:54:28.084218 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
22:54:28.562344 run         create_hlr_db(pid=27045): Launched
22:54:28.735377 bus                          /gobi_6: Setting Powered False
22:54:29.757309 run         create_hlr_db(pid=27045): Terminated: ok {rc=0}
22:54:30.160370 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27047): Launched
22:54:30.464053 run   osmo-hlr_10.42.42.2(pid=27048): Launched
22:54:30.583367 run              osmo-stp_10.42.42.5: Starting osmo-stp
22:54:31.188851 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27050): Launched
22:54:31.730961 run   osmo-stp_10.42.42.5(pid=27051): Launched
22:54:31.933305 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
22:54:32.476318 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27053): Launched
22:54:32.583884 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
22:54:32.847855 run              patchelf(pid=27054): Launched
22:54:33.026852 run   osmo-stp_10.42.42.5(pid=27051): ERR: Terminated: ERROR {rc=1}  [trial-2365↪gprs:nanobts+band-900↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27051)]
22:54:33.158254 run   osmo-stp_10.42.42.5(pid=27051): stdout: 
| (launched: 2022-12-09_22:54:31.408865)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
22:54:33.289161 run   osmo-stp_10.42.42.5(pid=27051): stderr: 
| [0;m[38;5;43m20221209225431630 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221209225431630 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221209225431631 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221209225431631 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209225431632 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209225431632 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209225431632 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
22:54:33.415533 run   osmo-stp_10.42.42.5(pid=27051): stdout: 
| (launched: 2022-12-09_22:54:31.408865)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
22:54:33.540363 run   osmo-stp_10.42.42.5(pid=27051): stderr: 
| [0;m[38;5;43m20221209225431630 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221209225431630 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221209225431631 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221209225431631 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209225431632 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209225431632 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209225431632 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
22:54:33.687818 run              patchelf(pid=27054): Terminating (SIGINT)
22:54:33.861413 run              patchelf(pid=27054): Terminated: ok {rc=0}
22:54:33.893211 tst                    iperf3m4.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=27051): Process ended prematurely: osmo-stp_10.42.42.5(pid=27051) [trial-2365↪gprs:nanobts+band-900↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27051)]  [trial-2365↪gprs:nanobts+band-900↪iperf3m4.py:8]
22:54:33.902382 tst                    iperf3m4.py:8: Test FAILED (10.8 sec)
22:54:33.963805 run   osmo-hlr_10.42.42.2(pid=27048): ERR: Terminated: ERROR {rc=237}  [trial-2365↪gprs:nanobts+band-900↪iperf3m4.py↪iperf3m4.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=27048)]
22:54:34.012728 run   osmo-hlr_10.42.42.2(pid=27048): stdout: 
| (launched: 2022-12-09_22:54:30.313542) 
22:54:34.062749 run   osmo-hlr_10.42.42.2(pid=27048): stderr: 
| [0;m[1;31m20221209225430489 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221209225430489 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221209225430489 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221209225430489 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221209225430489 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221209225430489 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221209225430501 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2365/run.2022-12-09_21-44-27/gprs:nanobts+band-900/iperf3m4.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221209225430509 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209225430510 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209225430510 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
22:54:34.105118 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27037): Terminating (SIGTERM)
22:54:34.144823 run iperf3-srv_10.42.42.10(pid=27038): Terminating (SIGTERM)
22:54:34.184700 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27039): Terminating (SIGTERM)
22:54:34.224600 run iperf3-srv_10.42.42.10(pid=27040): Terminating (SIGTERM)
22:54:34.264522 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27041): Terminating (SIGTERM)
22:54:34.304430 run iperf3-srv_10.42.42.10(pid=27042): Terminating (SIGTERM)
22:54:34.344471 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27043): Terminating (SIGTERM)
22:54:34.384356 run iperf3-srv_10.42.42.10(pid=27044): Terminating (SIGTERM)
22:54:34.424333 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27047): Terminating (SIGTERM)
22:54:34.464282 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27050): Terminating (SIGTERM)
22:54:34.505367 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27053): Terminating (SIGTERM)
22:54:34.514618 ---      ParallelTerminationStrategy: PID 27037 died...
22:54:34.568295 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27037): Terminated: ok {rc=0}
22:54:34.577985 ---      ParallelTerminationStrategy: PID 27038 died...
22:54:34.631046 run iperf3-srv_10.42.42.10(pid=27038): Terminated {rc=256}
22:54:34.640722 ---      ParallelTerminationStrategy: PID 27039 died...
22:54:34.693677 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27039): Terminated: ok {rc=0}
22:54:34.703579 ---      ParallelTerminationStrategy: PID 27040 died...
22:54:34.756534 run iperf3-srv_10.42.42.10(pid=27040): Terminated {rc=256}
22:54:34.766447 ---      ParallelTerminationStrategy: PID 27041 died...
22:54:34.819387 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27041): Terminated: ok {rc=0}
22:54:34.829118 ---      ParallelTerminationStrategy: PID 27042 died...
22:54:34.881780 run iperf3-srv_10.42.42.10(pid=27042): Terminated {rc=256}
22:54:34.891622 ---      ParallelTerminationStrategy: PID 27043 died...
22:54:34.944185 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27043): Terminated: ok {rc=0}
22:54:34.954074 ---      ParallelTerminationStrategy: PID 27044 died...
22:54:35.006845 run iperf3-srv_10.42.42.10(pid=27044): Terminated {rc=256}
22:54:35.016532 ---      ParallelTerminationStrategy: PID 27047 died...
22:54:35.068762 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27047): Terminated: ok {rc=0}
22:54:35.078740 ---      ParallelTerminationStrategy: PID 27050 died...
22:54:35.131884 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27050): Terminated: ok {rc=0}
22:54:35.141870 ---      ParallelTerminationStrategy: PID 27053 died...
22:54:35.194489 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27053): Terminated: ok {rc=0}
22:54:35.282709 bus                          /gobi_4: Setting Powered False
22:54:36.386802 bus                          /gobi_4: Setting Powered False
22:54:37.497884 bus                          /gobi_1: Setting Powered False
22:54:38.600370 bus                          /gobi_1: Setting Powered False
22:54:39.706704 bus                          /gobi_0: Setting Powered False
22:54:40.812657 bus                          /gobi_0: Setting Powered False
22:54:41.921015 bus                          /gobi_6: Setting Powered False
