
----------------------------------------------
trial-2365 gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py
----------------------------------------------
22:10:47.320265 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
22:10:47.332108 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1)
22:10:47.484265 tst         cs_paging_gprs_active.py: using LAC 23997
22:10:47.610031 tst         cs_paging_gprs_active.py: using RAC 27
22:10:47.738357 tst         cs_paging_gprs_active.py: using CellId 23997
22:10:47.862944 tst         cs_paging_gprs_active.py: using BVCI 23998
22:10:47.887668 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
22:10:47.899420 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
22:10:47.910923 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
22:10:47.922402 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
22:10:47.933833 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
22:10:47.945331 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
22:10:47.956835 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
22:10:47.968239 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
22:10:47.979852 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
22:10:48.098700 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
22:10:48.380470 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003...
22:10:48.506893 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
22:10:48.822128 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22640): Launched
22:10:49.084138 run iperf3-srv_10.42.42.10(pid=22641): Launched
22:10:49.269813 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004...
22:10:49.396180 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
22:10:49.710993 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22642): Launched
22:10:49.974440 run iperf3-srv_10.42.42.10(pid=22643): Launched
22:10:50.162112 tst      cs_paging_gprs_active.py:38: start network...
22:10:50.289999 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
22:10:50.772588 run         create_hlr_db(pid=22644): Launched
22:10:50.947183 bus                          /gobi_6: Setting Powered False
22:10:51.968093 run         create_hlr_db(pid=22644): Terminated: ok {rc=0}
22:10:52.398958 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22646): Launched
22:10:52.723595 run   osmo-hlr_10.42.42.2(pid=22647): Launched
22:10:52.841351 run              osmo-stp_10.42.42.5: Starting osmo-stp
22:10:53.403554 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22649): Launched
22:10:53.726577 run   osmo-stp_10.42.42.5(pid=22650): Launched
22:10:53.843855 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
22:10:54.409236 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22652): Launched
22:10:54.524831 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
22:10:54.806847 run              patchelf(pid=22653): Launched
22:10:54.997455 run   osmo-stp_10.42.42.5(pid=22650): ERR: Terminated: ERROR {rc=1}  [trial-2365↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22650)]
22:10:55.136685 run   osmo-stp_10.42.42.5(pid=22650): stdout: 
| (launched: 2022-12-09_22:10:53.568273)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
22:10:55.275360 run   osmo-stp_10.42.42.5(pid=22650): stderr: 
| [0;m[38;5;43m20221209221053760 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221209221053761 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221209221053761 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221209221053761 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209221053762 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209221053762 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209221053762 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
22:10:55.409598 run   osmo-stp_10.42.42.5(pid=22650): stdout: 
| (launched: 2022-12-09_22:10:53.568273)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
22:10:55.542586 run   osmo-stp_10.42.42.5(pid=22650): stderr: 
| [0;m[38;5;43m20221209221053760 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221209221053761 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221209221053761 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221209221053761 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209221053762 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209221053762 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209221053762 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
22:10:55.697996 run              patchelf(pid=22653): Terminating (SIGINT)
22:10:55.880278 run              patchelf(pid=22653): Terminated: ok {rc=0}
22:10:55.913828 tst      cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=22650): Process ended prematurely: osmo-stp_10.42.42.5(pid=22650) [trial-2365↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22650)]  [trial-2365↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38]
22:10:55.923652 tst      cs_paging_gprs_active.py:38: Test FAILED (8.6 sec)
22:10:55.986580 run   osmo-hlr_10.42.42.2(pid=22647): ERR: Terminated: ERROR {rc=237}  [trial-2365↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=22647)]
22:10:56.038032 run   osmo-hlr_10.42.42.2(pid=22647): stdout: 
| (launched: 2022-12-09_22:10:52.564840) 
22:10:56.090251 run   osmo-hlr_10.42.42.2(pid=22647): stderr: 
| [0;m[1;31m20221209221052765 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221209221052765 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221209221052765 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221209221052765 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221209221052765 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221209221052765 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221209221052778 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2365/run.2022-12-09_21-44-27/gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221209221052786 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209221052787 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209221052787 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
22:10:56.135071 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22640): Terminating (SIGTERM)
22:10:56.177205 run iperf3-srv_10.42.42.10(pid=22641): Terminating (SIGTERM)
22:10:56.219310 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22642): Terminating (SIGTERM)
22:10:56.261430 run iperf3-srv_10.42.42.10(pid=22643): Terminating (SIGTERM)
22:10:56.303619 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22646): Terminating (SIGTERM)
22:10:56.345420 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22649): Terminating (SIGTERM)
22:10:56.387428 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22652): Terminating (SIGTERM)
22:10:56.397204 ---      ParallelTerminationStrategy: PID 22640 died...
22:10:56.453952 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22640): Terminated: ok {rc=0}
22:10:56.464110 ---      ParallelTerminationStrategy: PID 22641 died...
22:10:56.519758 run iperf3-srv_10.42.42.10(pid=22641): Terminated {rc=256}
22:10:56.529944 ---      ParallelTerminationStrategy: PID 22642 died...
22:10:56.585740 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22642): Terminated: ok {rc=0}
22:10:56.595666 ---      ParallelTerminationStrategy: PID 22643 died...
22:10:56.651065 run iperf3-srv_10.42.42.10(pid=22643): Terminated {rc=256}
22:10:56.661148 ---      ParallelTerminationStrategy: PID 22646 died...
22:10:56.717214 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22646): Terminated: ok {rc=0}
22:10:56.727333 ---      ParallelTerminationStrategy: PID 22649 died...
22:10:56.782712 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22649): Terminated: ok {rc=0}
22:10:56.792823 ---      ParallelTerminationStrategy: PID 22652 died...
22:10:56.849121 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22652): Terminated: ok {rc=0}
22:10:56.936266 bus                          /gobi_0: Setting Powered False
22:10:58.042357 bus                          /gobi_0: Setting Powered False
22:10:59.151678 bus                          /gobi_6: Setting Powered False
