
----------------------------------------------
trial-2365 gprs:trx-b200 iperf3m4.py
----------------------------------------------
22:07:06.930051 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
22:07:06.941187 tst                    gprs:trx-b200: Using 1 x bts (candidates: 1)
22:07:07.078679 tst                      iperf3m4.py: using LAC 23979
22:07:07.195804 tst                      iperf3m4.py: using RAC 9
22:07:07.314196 tst                      iperf3m4.py: using CellId 23979
22:07:07.439651 tst                      iperf3m4.py: using BVCI 23980
22:07:07.464505 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
22:07:07.475881 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
22:07:07.487083 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
22:07:07.498792 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
22:07:07.510407 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
22:07:07.522192 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
22:07:07.534079 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
22:07:07.545520 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
22:07:07.557037 tst                    gprs:trx-b200: Using 1 x modem (candidates: 4)
22:07:07.674824 tst                    gprs:trx-b200: Using 1 x modem (candidates: 4)
22:07:07.797273 tst                    gprs:trx-b200: Using 1 x modem (candidates: 4)
22:07:07.918199 tst                    gprs:trx-b200: Using 1 x modem (candidates: 4)
22:07:08.194830 tst                    iperf3m4.py:8: start iperfv3 server 10.42.42.10:5003...
22:07:08.321154 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
22:07:08.636556 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21579): Launched
22:07:08.897380 run iperf3-srv_10.42.42.10(pid=21580): Launched
22:07:09.082378 tst                    iperf3m4.py:8: start iperfv3 server 10.42.42.10:5004...
22:07:09.208425 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
22:07:09.523136 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21581): Launched
22:07:09.784711 run iperf3-srv_10.42.42.10(pid=21582): Launched
22:07:09.969716 tst                    iperf3m4.py:8: start iperfv3 server 10.42.42.10:5005...
22:07:10.095768 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
22:07:10.409609 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21583): Launched
22:07:10.670264 run iperf3-srv_10.42.42.10(pid=21584): Launched
22:07:10.854351 tst                    iperf3m4.py:8: start iperfv3 server 10.42.42.10:5006...
22:07:10.980570 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
22:07:11.295244 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21585): Launched
22:07:11.555832 run iperf3-srv_10.42.42.10(pid=21586): Launched
22:07:11.740732 tst                    iperf3m4.py:8: start network...
22:07:11.866880 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
22:07:12.357678 run         create_hlr_db(pid=21587): Launched
22:07:12.544121 bus                          /gobi_6: Setting Powered False
22:07:13.565903 run         create_hlr_db(pid=21587): Terminated: ok {rc=0}
22:07:13.996907 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21589): Launched
22:07:14.319246 run   osmo-hlr_10.42.42.2(pid=21590): Launched
22:07:14.436873 run              osmo-stp_10.42.42.5: Starting osmo-stp
22:07:14.999297 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21592): Launched
22:07:15.322891 run   osmo-stp_10.42.42.5(pid=21593): Launched
22:07:15.439912 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
22:07:16.024529 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21595): Launched
22:07:16.143339 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
22:07:16.446507 run              patchelf(pid=21596): Launched
22:07:16.640488 run   osmo-stp_10.42.42.5(pid=21593): ERR: Terminated: ERROR {rc=1}  [trial-2365↪gprs:trx-b200↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21593)]
22:07:16.782437 run   osmo-stp_10.42.42.5(pid=21593): stdout: 
| (launched: 2022-12-09_22:07:15.164758)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
22:07:16.924570 run   osmo-stp_10.42.42.5(pid=21593): stderr: 
| [0;m[38;5;43m20221209220715357 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221209220715357 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221209220715357 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221209220715357 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209220715358 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209220715358 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209220715358 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
22:07:17.061793 run   osmo-stp_10.42.42.5(pid=21593): stdout: 
| (launched: 2022-12-09_22:07:15.164758)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
22:07:17.198025 run   osmo-stp_10.42.42.5(pid=21593): stderr: 
| [0;m[38;5;43m20221209220715357 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221209220715357 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221209220715357 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221209220715357 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209220715358 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209220715358 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209220715358 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
22:07:17.354914 run              patchelf(pid=21596): Terminating (SIGINT)
22:07:17.538630 run              patchelf(pid=21596): Terminated: ok {rc=0}
22:07:17.572196 tst                    iperf3m4.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=21593): Process ended prematurely: osmo-stp_10.42.42.5(pid=21593) [trial-2365↪gprs:trx-b200↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21593)]  [trial-2365↪gprs:trx-b200↪iperf3m4.py:8]
22:07:17.582589 tst                    iperf3m4.py:8: Test FAILED (10.7 sec)
22:07:17.645885 run   osmo-hlr_10.42.42.2(pid=21590): ERR: Terminated: ERROR {rc=237}  [trial-2365↪gprs:trx-b200↪iperf3m4.py↪iperf3m4.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=21590)]
22:07:17.697669 run   osmo-hlr_10.42.42.2(pid=21590): stdout: 
| (launched: 2022-12-09_22:07:14.161766) 
22:07:17.749658 run   osmo-hlr_10.42.42.2(pid=21590): stderr: 
| [0;m[1;31m20221209220714363 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221209220714363 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221209220714363 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221209220714363 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221209220714363 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221209220714363 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221209220714383 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2365/run.2022-12-09_21-44-27/gprs:trx-b200/iperf3m4.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221209220714393 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209220714394 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209220714394 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
22:07:17.793927 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21579): Terminating (SIGTERM)
22:07:17.835662 run iperf3-srv_10.42.42.10(pid=21580): Terminating (SIGTERM)
22:07:17.877641 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21581): Terminating (SIGTERM)
22:07:17.919548 run iperf3-srv_10.42.42.10(pid=21582): Terminating (SIGTERM)
22:07:17.961802 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21583): Terminating (SIGTERM)
22:07:18.003698 run iperf3-srv_10.42.42.10(pid=21584): Terminating (SIGTERM)
22:07:18.045499 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21585): Terminating (SIGTERM)
22:07:18.087220 run iperf3-srv_10.42.42.10(pid=21586): Terminating (SIGTERM)
22:07:18.129152 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21589): Terminating (SIGTERM)
22:07:18.171189 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21592): Terminating (SIGTERM)
22:07:18.213136 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21595): Terminating (SIGTERM)
22:07:18.222800 ---      ParallelTerminationStrategy: PID 21579 died...
22:07:18.278929 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21579): Terminated: ok {rc=0}
22:07:18.288925 ---      ParallelTerminationStrategy: PID 21580 died...
22:07:18.344907 run iperf3-srv_10.42.42.10(pid=21580): Terminated {rc=256}
22:07:18.354937 ---      ParallelTerminationStrategy: PID 21581 died...
22:07:18.410922 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21581): Terminated: ok {rc=0}
22:07:18.421257 ---      ParallelTerminationStrategy: PID 21582 died...
22:07:18.476812 run iperf3-srv_10.42.42.10(pid=21582): Terminated {rc=256}
22:07:18.486900 ---      ParallelTerminationStrategy: PID 21583 died...
22:07:18.542516 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21583): Terminated: ok {rc=0}
22:07:18.552544 ---      ParallelTerminationStrategy: PID 21584 died...
22:07:18.608243 run iperf3-srv_10.42.42.10(pid=21584): Terminated {rc=256}
22:07:18.618292 ---      ParallelTerminationStrategy: PID 21585 died...
22:07:18.673949 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21585): Terminated: ok {rc=0}
22:07:18.683923 ---      ParallelTerminationStrategy: PID 21586 died...
22:07:18.739507 run iperf3-srv_10.42.42.10(pid=21586): Terminated {rc=256}
22:07:18.749697 ---      ParallelTerminationStrategy: PID 21589 died...
22:07:18.805384 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21589): Terminated: ok {rc=0}
22:07:18.815465 ---      ParallelTerminationStrategy: PID 21592 died...
22:07:18.871314 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21592): Terminated: ok {rc=0}
22:07:18.881459 ---      ParallelTerminationStrategy: PID 21595 died...
22:07:18.937177 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21595): Terminated: ok {rc=0}
22:07:19.024827 bus                          /gobi_4: Setting Powered False
22:07:20.133209 bus                          /gobi_4: Setting Powered False
22:07:21.241841 bus                          /gobi_1: Setting Powered False
22:07:22.349327 bus                          /gobi_1: Setting Powered False
22:07:23.460723 bus                          /gobi_0: Setting Powered False
22:07:24.563795 bus                          /gobi_0: Setting Powered False
22:07:25.675908 bus                          /gobi_6: Setting Powered False
