
----------------------------------------------
trial-2366 dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo switch_tch_pdch.py
----------------------------------------------
00:11:35.568568 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
00:11:35.579970 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x bts (candidates: 1)
00:11:35.728862 tst               switch_tch_pdch.py: using LAC 24639
00:11:35.849954 tst               switch_tch_pdch.py: using RAC 159
00:11:35.971807 tst               switch_tch_pdch.py: using CellId 24639
00:11:36.094395 tst               switch_tch_pdch.py: using BVCI 24640
00:11:36.118640 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
00:11:36.130443 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
00:11:36.142018 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
00:11:36.153735 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
00:11:36.165512 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
00:11:36.177161 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
00:11:36.189749 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
00:11:36.201950 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2)
00:11:36.317974 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2)
00:11:36.606045 tst            switch_tch_pdch.py:51: start network...
00:11:36.737196 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
00:11:37.200240 run          create_hlr_db(pid=1255): Launched
00:11:37.328102 bus                          /gobi_6: Setting Powered False
00:11:38.403093 run          create_hlr_db(pid=1255): Terminated: ok {rc=0}
00:11:38.772373 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1257): Launched
00:11:39.065617 run    osmo-hlr_10.42.42.2(pid=1258): Launched
00:11:39.173941 run              osmo-stp_10.42.42.5: Starting osmo-stp
00:11:39.655415 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1260): Launched
00:11:39.947673 run    osmo-stp_10.42.42.5(pid=1261): Launched
00:11:40.054029 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
00:11:40.538214 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1263): Launched
00:11:40.642691 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
00:11:40.896722 run               patchelf(pid=1264): Launched
00:11:41.067524 run    osmo-stp_10.42.42.5(pid=1261): ERR: Terminated: ERROR {rc=1}  [trial-2366↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1261)]
00:11:41.192669 run    osmo-stp_10.42.42.5(pid=1261): stdout: 
| (launched: 2022-12-10_00:11:39.803677)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
00:11:41.318209 run    osmo-stp_10.42.42.5(pid=1261): stderr: 
| [0;m[38;5;43m20221210001139973 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221210001139973 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221210001139974 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221210001139974 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210001139975 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210001139975 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210001139975 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
00:11:41.439300 run    osmo-stp_10.42.42.5(pid=1261): stdout: 
| (launched: 2022-12-10_00:11:39.803677)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
00:11:41.559148 run    osmo-stp_10.42.42.5(pid=1261): stderr: 
| [0;m[38;5;43m20221210001139973 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221210001139973 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221210001139974 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221210001139974 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210001139975 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210001139975 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210001139975 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
00:11:41.699147 run               patchelf(pid=1264): Terminating (SIGINT)
00:11:41.863403 run               patchelf(pid=1264): Terminated: ok {rc=0}
00:11:41.893776 tst            switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=1261): Process ended prematurely: osmo-stp_10.42.42.5(pid=1261) [trial-2366↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1261)]  [trial-2366↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54]
00:11:41.902466 tst            switch_tch_pdch.py:54: Test FAILED (6.3 sec)
00:11:41.961367 run    osmo-hlr_10.42.42.2(pid=1258): ERR: Terminated: ERROR {rc=237}  [trial-2366↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=1258)]
00:11:42.009844 run    osmo-hlr_10.42.42.2(pid=1258): stdout: 
| (launched: 2022-12-10_00:11:38.921362) 
00:11:42.058931 run    osmo-hlr_10.42.42.2(pid=1258): stderr: 
| [0;m[1;31m20221210001139095 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221210001139095 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221210001139095 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221210001139095 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221210001139095 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221210001139096 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221210001139107 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2366/run.2022-12-09_23-11-33/dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221210001139116 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221210001139116 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221210001139117 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
00:11:42.100776 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1257): Terminating (SIGTERM)
00:11:42.140464 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1260): Terminating (SIGTERM)
00:11:42.179993 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1263): Terminating (SIGTERM)
00:11:42.189386 ---      ParallelTerminationStrategy: PID 1257 died...
00:11:42.242082 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1257): Terminated: ok {rc=0}
00:11:42.252092 ---      ParallelTerminationStrategy: PID 1260 died...
00:11:42.304683 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1260): Terminated: ok {rc=0}
00:11:42.314413 ---      ParallelTerminationStrategy: PID 1263 died...
00:11:42.367174 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1263): Terminated: ok {rc=0}
00:11:42.455227 bus                          /gobi_0: Setting Powered False
00:11:43.557715 bus                          /gobi_0: Setting Powered False
00:11:44.668200 bus                          /gobi_6: Setting Powered False
