
----------------------------------------------
trial-2366 gprs:nanobts+band-1900+mod-bts0-egprs ping_idle_ping.py
----------------------------------------------
00:16:21.904842 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:16:21.917389 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x bts (candidates: 1)
00:16:22.052483 tst                ping_idle_ping.py: using LAC 24665
00:16:22.171236 tst                ping_idle_ping.py: using RAC 185
00:16:22.288701 tst                ping_idle_ping.py: using CellId 24665
00:16:22.405134 tst                ping_idle_ping.py: using BVCI 24666
00:16:22.427601 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:16:22.438630 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:16:22.449367 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:16:22.460079 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:16:22.470787 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:16:22.481497 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:16:22.492273 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:16:22.503077 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x modem (candidates: 4)
00:16:22.790805 tst             ping_idle_ping.py:24: start network...
00:16:22.922492 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
00:16:23.426104 run          create_hlr_db(pid=1589): Launched
00:16:23.609770 bus                          /gobi_6: Setting Powered False
00:16:24.631676 run          create_hlr_db(pid=1589): Terminated: ok {rc=0}
00:16:25.051754 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1591): Launched
00:16:25.368515 run    osmo-hlr_10.42.42.2(pid=1592): Launched
00:16:25.483938 run              osmo-stp_10.42.42.5: Starting osmo-stp
00:16:26.030462 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1594): Launched
00:16:26.344800 run    osmo-stp_10.42.42.5(pid=1595): Launched
00:16:26.459631 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
00:16:27.010458 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1597): Launched
00:16:27.123324 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
00:16:27.397788 run               patchelf(pid=1598): Launched
00:16:27.582603 run    osmo-stp_10.42.42.5(pid=1595): ERR: Terminated: ERROR {rc=1}  [trial-2366↪gprs:nanobts+band-1900+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1595)]
00:16:27.717905 run    osmo-stp_10.42.42.5(pid=1595): stdout: 
| (launched: 2022-12-10_00:16:26.190560)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
00:16:27.854172 run    osmo-stp_10.42.42.5(pid=1595): stderr: 
| [0;m[38;5;43m20221210001626380 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221210001626381 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221210001626381 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221210001626381 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210001626382 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210001626382 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210001626382 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
00:16:27.984893 run    osmo-stp_10.42.42.5(pid=1595): stdout: 
| (launched: 2022-12-10_00:16:26.190560)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
00:16:28.114509 run    osmo-stp_10.42.42.5(pid=1595): stderr: 
| [0;m[38;5;43m20221210001626380 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221210001626381 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221210001626381 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221210001626381 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210001626382 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210001626382 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210001626382 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
00:16:28.265498 run               patchelf(pid=1598): Terminating (SIGINT)
00:16:28.442570 run               patchelf(pid=1598): Terminated: ok {rc=0}
00:16:28.474726 tst             ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=1595): Process ended prematurely: osmo-stp_10.42.42.5(pid=1595) [trial-2366↪gprs:nanobts+band-1900+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1595)]  [trial-2366↪gprs:nanobts+band-1900+mod-bts0-egprs↪ping_idle_ping.py:27]
00:16:28.483970 tst             ping_idle_ping.py:27: Test FAILED (6.6 sec)
00:16:28.547177 run    osmo-hlr_10.42.42.2(pid=1592): ERR: Terminated: ERROR {rc=237}  [trial-2366↪gprs:nanobts+band-1900+mod-bts0-egprs↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=1592)]
00:16:28.598459 run    osmo-hlr_10.42.42.2(pid=1592): stdout: 
| (launched: 2022-12-10_00:16:25.212745) 
00:16:28.650639 run    osmo-hlr_10.42.42.2(pid=1592): stderr: 
| [0;m[1;31m20221210001625409 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221210001625409 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221210001625409 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221210001625409 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221210001625409 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221210001625409 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221210001625421 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2366/run.2022-12-09_23-11-33/gprs:nanobts+band-1900+mod-bts0-egprs/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221210001625430 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221210001625430 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221210001625430 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
00:16:28.694382 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1591): Terminating (SIGTERM)
00:16:28.736503 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1594): Terminating (SIGTERM)
00:16:28.778271 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1597): Terminating (SIGTERM)
00:16:28.788447 ---      ParallelTerminationStrategy: PID 1591 died...
00:16:28.844692 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1591): Terminated: ok {rc=0}
00:16:28.854794 ---      ParallelTerminationStrategy: PID 1594 died...
00:16:28.910697 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1594): Terminated: ok {rc=0}
00:16:28.920760 ---      ParallelTerminationStrategy: PID 1597 died...
00:16:28.977141 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1597): Terminated: ok {rc=0}
00:16:29.064644 bus                          /gobi_6: Setting Powered False
