
----------------------------------------------
trial-2366 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py
----------------------------------------------
00:23:44.290543 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
00:23:44.301818 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1)
00:23:44.435200 tst         cs_paging_gprs_active.py: using LAC 24704
00:23:44.553997 tst         cs_paging_gprs_active.py: using RAC 224
00:23:44.670441 tst         cs_paging_gprs_active.py: using CellId 24704
00:23:44.786475 tst         cs_paging_gprs_active.py: using BVCI 24705
00:23:44.809227 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
00:23:44.820459 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
00:23:44.831728 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
00:23:44.842956 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
00:23:44.854113 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
00:23:44.865191 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
00:23:44.876394 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
00:23:44.887419 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
00:23:44.898741 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
00:23:45.017543 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
00:23:45.308769 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003...
00:23:45.442822 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
00:23:45.771648 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2386): Launched
00:23:46.089547 run iperf3-srv_10.42.42.10(pid=2387): Launched
00:23:46.288377 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004...
00:23:46.424673 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
00:23:46.795714 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2388): Launched
00:23:47.090786 run iperf3-srv_10.42.42.10(pid=2389): Launched
00:23:47.289132 tst      cs_paging_gprs_active.py:38: start network...
00:23:47.421863 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
00:23:47.923008 run          create_hlr_db(pid=2390): Launched
00:23:48.108076 bus                          /gobi_6: Setting Powered False
00:23:49.128931 run          create_hlr_db(pid=2390): Terminated: ok {rc=0}
00:23:49.530135 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2392): Launched
00:23:49.829285 run    osmo-hlr_10.42.42.2(pid=2393): Launched
00:23:49.945007 run              osmo-stp_10.42.42.5: Starting osmo-stp
00:23:50.471443 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2395): Launched
00:23:50.769981 run    osmo-stp_10.42.42.5(pid=2396): Launched
00:23:50.888424 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
00:23:51.416525 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2398): Launched
00:23:51.522947 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
00:23:51.782238 run               patchelf(pid=2399): Launched
00:23:51.980727 run    osmo-stp_10.42.42.5(pid=2396): ERR: Terminated: ERROR {rc=1}  [trial-2366↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2396)]
00:23:52.108168 run    osmo-stp_10.42.42.5(pid=2396): stdout: 
| (launched: 2022-12-10_00:23:50.623458)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
00:23:52.236296 run    osmo-stp_10.42.42.5(pid=2396): stderr: 
| [0;m[38;5;43m20221210002350794 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221210002350794 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221210002350795 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221210002350795 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210002350795 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210002350795 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210002350796 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
00:23:52.359351 run    osmo-stp_10.42.42.5(pid=2396): stdout: 
| (launched: 2022-12-10_00:23:50.623458)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
00:23:52.481102 run    osmo-stp_10.42.42.5(pid=2396): stderr: 
| [0;m[38;5;43m20221210002350794 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221210002350794 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221210002350795 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221210002350795 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210002350795 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210002350795 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210002350796 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
00:23:52.623271 run               patchelf(pid=2399): Terminating (SIGINT)
00:23:52.790427 run               patchelf(pid=2399): Terminated: ok {rc=0}
00:23:52.821569 tst      cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=2396): Process ended prematurely: osmo-stp_10.42.42.5(pid=2396) [trial-2366↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2396)]  [trial-2366↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38]
00:23:52.830757 tst      cs_paging_gprs_active.py:38: Test FAILED (8.6 sec)
00:23:52.889571 run    osmo-hlr_10.42.42.2(pid=2393): ERR: Terminated: ERROR {rc=237}  [trial-2366↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=2393)]
00:23:52.937940 run    osmo-hlr_10.42.42.2(pid=2393): stdout: 
| (launched: 2022-12-10_00:23:49.682398) 
00:23:52.986859 run    osmo-hlr_10.42.42.2(pid=2393): stderr: 
| [0;m[1;31m20221210002349858 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221210002349858 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221210002349858 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221210002349859 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221210002349859 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221210002349859 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221210002349871 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2366/run.2022-12-09_23-11-33/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221210002349881 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221210002349881 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221210002349881 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
00:23:53.028413 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2386): Terminating (SIGTERM)
00:23:53.067334 run iperf3-srv_10.42.42.10(pid=2387): Terminating (SIGTERM)
00:23:53.106418 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2388): Terminating (SIGTERM)
00:23:53.145263 run iperf3-srv_10.42.42.10(pid=2389): Terminating (SIGTERM)
00:23:53.184265 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2392): Terminating (SIGTERM)
00:23:53.223309 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2395): Terminating (SIGTERM)
00:23:53.262495 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2398): Terminating (SIGTERM)
00:23:53.271424 ---      ParallelTerminationStrategy: PID 2386 died...
00:23:53.324319 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2386): Terminated: ok {rc=0}
00:23:53.333700 ---      ParallelTerminationStrategy: PID 2387 died...
00:23:53.386148 run iperf3-srv_10.42.42.10(pid=2387): Terminated {rc=256}
00:23:53.395416 ---      ParallelTerminationStrategy: PID 2388 died...
00:23:53.447537 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2388): Terminated: ok {rc=0}
00:23:53.456826 ---      ParallelTerminationStrategy: PID 2389 died...
00:23:53.508864 run iperf3-srv_10.42.42.10(pid=2389): Terminated {rc=256}
00:23:53.518579 ---      ParallelTerminationStrategy: PID 2392 died...
00:23:53.570597 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2392): Terminated: ok {rc=0}
00:23:53.579890 ---      ParallelTerminationStrategy: PID 2395 died...
00:23:53.632411 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2395): Terminated: ok {rc=0}
00:23:53.641763 ---      ParallelTerminationStrategy: PID 2398 died...
00:23:53.694357 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2398): Terminated: ok {rc=0}
00:23:53.781634 bus                          /gobi_0: Setting Powered False
00:23:54.884146 bus                          /gobi_0: Setting Powered False
00:23:55.994614 bus                          /gobi_6: Setting Powered False
