
----------------------------------------------
trial-2367 dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo switch_tch_pdch.py
----------------------------------------------
01:40:20.193687 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
01:40:20.205218 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x bts (candidates: 1)
01:40:20.358631 tst               switch_tch_pdch.py: using LAC 25100
01:40:20.476448 tst               switch_tch_pdch.py: using RAC 110
01:40:20.593196 tst               switch_tch_pdch.py: using CellId 25100
01:40:20.708925 tst               switch_tch_pdch.py: using BVCI 25101
01:40:20.731729 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
01:40:20.743035 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
01:40:20.754157 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
01:40:20.765654 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
01:40:20.777098 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
01:40:20.788480 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
01:40:20.799911 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
01:40:20.811310 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2)
01:40:20.926641 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2)
01:40:21.198425 tst            switch_tch_pdch.py:51: start network...
01:40:21.321300 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
01:40:21.763056 run          create_hlr_db(pid=9893): Launched
01:40:21.883899 bus                          /gobi_6: Setting Powered False
01:40:22.954660 run          create_hlr_db(pid=9893): Terminated: ok {rc=0}
01:40:23.350198 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9895): Launched
01:40:23.669027 run    osmo-hlr_10.42.42.2(pid=9896): Launched
01:40:23.784597 run              osmo-stp_10.42.42.5: Starting osmo-stp
01:40:24.306650 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9898): Launched
01:40:24.625007 run    osmo-stp_10.42.42.5(pid=9899): Launched
01:40:24.739569 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
01:40:25.266827 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9901): Launched
01:40:25.379017 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
01:40:25.655379 run               patchelf(pid=9902): Launched
01:40:25.840629 run    osmo-stp_10.42.42.5(pid=9899): ERR: Terminated: ERROR {rc=1}  [trial-2367↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9899)]
01:40:25.975665 run    osmo-stp_10.42.42.5(pid=9899): stdout: 
| (launched: 2022-12-10_01:40:24.467251)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:40:26.111093 run    osmo-stp_10.42.42.5(pid=9899): stderr: 
| [0;m[38;5;43m20221210014024659 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221210014024659 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221210014024660 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221210014024660 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210014024663 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210014024663 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210014024663 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:40:26.242761 run    osmo-stp_10.42.42.5(pid=9899): stdout: 
| (launched: 2022-12-10_01:40:24.467251)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:40:26.372862 run    osmo-stp_10.42.42.5(pid=9899): stderr: 
| [0;m[38;5;43m20221210014024659 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221210014024659 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221210014024660 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221210014024660 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210014024663 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210014024663 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210014024663 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:40:26.523792 run               patchelf(pid=9902): Terminating (SIGINT)
01:40:26.701464 run               patchelf(pid=9902): Terminated: ok {rc=0}
01:40:26.733849 tst            switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=9899): Process ended prematurely: osmo-stp_10.42.42.5(pid=9899) [trial-2367↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9899)]  [trial-2367↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54]
01:40:26.743188 tst            switch_tch_pdch.py:54: Test FAILED (6.5 sec)
01:40:26.805677 run    osmo-hlr_10.42.42.2(pid=9896): ERR: Terminated: ERROR {rc=237}  [trial-2367↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=9896)]
01:40:26.856672 run    osmo-hlr_10.42.42.2(pid=9896): stdout: 
| (launched: 2022-12-10_01:40:23.511623) 
01:40:26.908268 run    osmo-hlr_10.42.42.2(pid=9896): stderr: 
| [0;m[1;31m20221210014023710 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221210014023710 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221210014023711 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221210014023711 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221210014023711 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221210014023711 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221210014023723 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2367/run.2022-12-10_00-40-00/dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221210014023731 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221210014023732 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221210014023732 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
01:40:26.952334 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9895): Terminating (SIGTERM)
01:40:26.993880 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9898): Terminating (SIGTERM)
01:40:27.035442 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9901): Terminating (SIGTERM)
01:40:27.045231 ---      ParallelTerminationStrategy: PID 9895 died...
01:40:27.100608 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9895): Terminated: ok {rc=0}
01:40:27.110633 ---      ParallelTerminationStrategy: PID 9898 died...
01:40:27.165796 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9898): Terminated: ok {rc=0}
01:40:27.175702 ---      ParallelTerminationStrategy: PID 9901 died...
01:40:27.230739 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9901): Terminated: ok {rc=0}
01:40:27.317804 bus                          /gobi_0: Setting Powered False
01:40:28.423321 bus                          /gobi_0: Setting Powered False
01:40:29.530932 bus                          /gobi_6: Setting Powered False
