
----------------------------------------------
trial-2367 gprs:nanobts+band-1900+mod-bts0-egprs ping_idle_ping.py
----------------------------------------------
01:45:09.307764 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:45:09.319431 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x bts (candidates: 1)
01:45:09.448425 tst                ping_idle_ping.py: using LAC 25126
01:45:09.566338 tst                ping_idle_ping.py: using RAC 136
01:45:09.683769 tst                ping_idle_ping.py: using CellId 25126
01:45:09.802183 tst                ping_idle_ping.py: using BVCI 25127
01:45:09.824598 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:45:09.835713 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:45:09.846569 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:45:09.857584 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:45:09.868403 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:45:09.879468 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:45:09.890692 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:45:09.901764 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x modem (candidates: 4)
01:45:10.194382 tst             ping_idle_ping.py:24: start network...
01:45:10.327088 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
01:45:10.845697 run         create_hlr_db(pid=10231): Launched
01:45:11.031299 bus                          /gobi_6: Setting Powered False
01:45:12.052539 run         create_hlr_db(pid=10231): Terminated: ok {rc=0}
01:45:12.457240 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10233): Launched
01:45:12.758829 run   osmo-hlr_10.42.42.2(pid=10234): Launched
01:45:12.873401 run              osmo-stp_10.42.42.5: Starting osmo-stp
01:45:13.393874 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10236): Launched
01:45:13.697086 run   osmo-stp_10.42.42.5(pid=10237): Launched
01:45:13.806760 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
01:45:14.329164 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10239): Launched
01:45:14.435076 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
01:45:14.696001 run              patchelf(pid=10240): Launched
01:45:14.871085 run   osmo-stp_10.42.42.5(pid=10237): ERR: Terminated: ERROR {rc=1}  [trial-2367↪gprs:nanobts+band-1900+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10237)]
01:45:14.999090 run   osmo-stp_10.42.42.5(pid=10237): stdout: 
| (launched: 2022-12-10_01:45:13.545331)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:45:15.126791 run   osmo-stp_10.42.42.5(pid=10237): stderr: 
| [0;m[38;5;43m20221210014513714 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221210014513714 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221210014513714 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221210014513715 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210014513717 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210014513717 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210014513717 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:45:15.251133 run   osmo-stp_10.42.42.5(pid=10237): stdout: 
| (launched: 2022-12-10_01:45:13.545331)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:45:15.376028 run   osmo-stp_10.42.42.5(pid=10237): stderr: 
| [0;m[38;5;43m20221210014513714 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221210014513714 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221210014513714 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221210014513715 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210014513717 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210014513717 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210014513717 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:45:15.518689 run              patchelf(pid=10240): Terminating (SIGINT)
01:45:15.685840 run              patchelf(pid=10240): Terminated: ok {rc=0}
01:45:15.716212 tst             ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=10237): Process ended prematurely: osmo-stp_10.42.42.5(pid=10237) [trial-2367↪gprs:nanobts+band-1900+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10237)]  [trial-2367↪gprs:nanobts+band-1900+mod-bts0-egprs↪ping_idle_ping.py:27]
01:45:15.724821 tst             ping_idle_ping.py:27: Test FAILED (6.4 sec)
01:45:15.785645 run   osmo-hlr_10.42.42.2(pid=10234): ERR: Terminated: ERROR {rc=237}  [trial-2367↪gprs:nanobts+band-1900+mod-bts0-egprs↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10234)]
01:45:15.835405 run   osmo-hlr_10.42.42.2(pid=10234): stdout: 
| (launched: 2022-12-10_01:45:12.608855) 
01:45:15.896196 run   osmo-hlr_10.42.42.2(pid=10234): stderr: 
| [0;m[1;31m20221210014512787 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221210014512788 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221210014512788 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221210014512788 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221210014512788 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221210014512788 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221210014512800 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2367/run.2022-12-10_00-40-00/gprs:nanobts+band-1900+mod-bts0-egprs/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221210014512808 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221210014512808 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221210014512808 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
01:45:15.939444 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10233): Terminating (SIGTERM)
01:45:15.980530 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10236): Terminating (SIGTERM)
01:45:16.022744 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10239): Terminating (SIGTERM)
01:45:16.033027 ---      ParallelTerminationStrategy: PID 10233 died...
01:45:16.089865 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10233): Terminated: ok {rc=0}
01:45:16.100262 ---      ParallelTerminationStrategy: PID 10236 died...
01:45:16.154800 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10236): Terminated: ok {rc=0}
01:45:16.165789 ---      ParallelTerminationStrategy: PID 10239 died...
01:45:16.220818 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10239): Terminated: ok {rc=0}
01:45:16.305290 bus                          /gobi_6: Setting Powered False
