
----------------------------------------------
trial-2367 gprs:nanobts+band-900+mod-bts0-egprs ping_idle_ping.py
----------------------------------------------
01:51:20.481710 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:51:20.494553 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x bts (candidates: 1)
01:51:20.635957 tst                ping_idle_ping.py: using LAC 25159
01:51:20.760606 tst                ping_idle_ping.py: using RAC 169
01:51:20.884697 tst                ping_idle_ping.py: using CellId 25159
01:51:21.009337 tst                ping_idle_ping.py: using BVCI 25160
01:51:21.033599 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:51:21.045129 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:51:21.056387 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:51:21.067740 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:51:21.079138 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:51:21.090318 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:51:21.101887 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:51:21.113258 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x modem (candidates: 4)
01:51:21.400416 tst             ping_idle_ping.py:24: start network...
01:51:21.532397 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
01:51:22.046995 run         create_hlr_db(pid=10665): Launched
01:51:22.231546 bus                          /gobi_6: Setting Powered False
01:51:23.251883 run         create_hlr_db(pid=10665): Terminated: ok {rc=0}
01:51:23.652813 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10667): Launched
01:51:23.953209 run   osmo-hlr_10.42.42.2(pid=10668): Launched
01:51:24.069731 run              osmo-stp_10.42.42.5: Starting osmo-stp
01:51:24.591966 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10670): Launched
01:51:24.888856 run   osmo-stp_10.42.42.5(pid=10671): Launched
01:51:25.000333 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
01:51:25.517972 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10673): Launched
01:51:25.623075 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
01:51:25.883255 run              patchelf(pid=10674): Launched
01:51:26.056879 run   osmo-stp_10.42.42.5(pid=10671): ERR: Terminated: ERROR {rc=1}  [trial-2367↪gprs:nanobts+band-900+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10671)]
01:51:26.183407 run   osmo-stp_10.42.42.5(pid=10671): stdout: 
| (launched: 2022-12-10_01:51:24.741864)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:51:26.310259 run   osmo-stp_10.42.42.5(pid=10671): stderr: 
| [0;m[38;5;43m20221210015124915 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221210015124916 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221210015124916 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221210015124916 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210015124917 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210015124917 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210015124917 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:51:26.432584 run   osmo-stp_10.42.42.5(pid=10671): stdout: 
| (launched: 2022-12-10_01:51:24.741864)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:51:26.554073 run   osmo-stp_10.42.42.5(pid=10671): stderr: 
| [0;m[38;5;43m20221210015124915 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221210015124916 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221210015124916 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221210015124916 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210015124917 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210015124917 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210015124917 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:51:26.695666 run              patchelf(pid=10674): Terminating (SIGINT)
01:51:26.861598 run              patchelf(pid=10674): Terminated: ok {rc=0}
01:51:26.891869 tst             ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=10671): Process ended prematurely: osmo-stp_10.42.42.5(pid=10671) [trial-2367↪gprs:nanobts+band-900+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10671)]  [trial-2367↪gprs:nanobts+band-900+mod-bts0-egprs↪ping_idle_ping.py:27]
01:51:26.900346 tst             ping_idle_ping.py:27: Test FAILED (6.4 sec)
01:51:26.960445 run   osmo-hlr_10.42.42.2(pid=10668): ERR: Terminated: ERROR {rc=237}  [trial-2367↪gprs:nanobts+band-900+mod-bts0-egprs↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10668)]
01:51:27.009086 run   osmo-hlr_10.42.42.2(pid=10668): stdout: 
| (launched: 2022-12-10_01:51:23.803593) 
01:51:27.058465 run   osmo-hlr_10.42.42.2(pid=10668): stderr: 
| [0;m[1;31m20221210015123977 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221210015123977 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221210015123977 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221210015123977 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221210015123978 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221210015123978 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221210015123988 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2367/run.2022-12-10_00-40-00/gprs:nanobts+band-900+mod-bts0-egprs/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221210015123997 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221210015123997 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221210015123997 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
01:51:27.099970 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10667): Terminating (SIGTERM)
01:51:27.139547 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10670): Terminating (SIGTERM)
01:51:27.178868 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10673): Terminating (SIGTERM)
01:51:27.188057 ---      ParallelTerminationStrategy: PID 10667 died...
01:51:27.240930 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10667): Terminated: ok {rc=0}
01:51:27.250836 ---      ParallelTerminationStrategy: PID 10670 died...
01:51:27.304129 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10670): Terminated: ok {rc=0}
01:51:27.313865 ---      ParallelTerminationStrategy: PID 10673 died...
01:51:27.366782 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10673): Terminated: ok {rc=0}
01:51:27.449772 bus                          /gobi_6: Setting Powered False
