
----------------------------------------------
trial-2367 gprs:trx-b200+mod-bts0-egprs ping.py
----------------------------------------------
01:04:03.944908 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:04:03.956050 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x bts (candidates: 1)
01:04:04.095392 tst                          ping.py: using LAC 24907
01:04:04.221007 tst                          ping.py: using RAC 172
01:04:04.340931 tst                          ping.py: using CellId 24907
01:04:04.460704 tst                          ping.py: using BVCI 24908
01:04:04.484472 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:04:04.495899 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:04:04.507040 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:04:04.518291 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:04:04.529330 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:04:04.540287 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:04:04.551506 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:04:04.562425 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4)
01:04:04.829095 tst                       ping.py:19: start network...
01:04:04.949227 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
01:04:05.405999 run          create_hlr_db(pid=5998): Launched
01:04:05.572332 bus                          /gobi_6: Setting Powered False
01:04:06.594372 run          create_hlr_db(pid=5998): Terminated: ok {rc=0}
01:04:07.007343 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6000): Launched
01:04:07.318112 run    osmo-hlr_10.42.42.2(pid=6001): Launched
01:04:07.436224 run              osmo-stp_10.42.42.5: Starting osmo-stp
01:04:07.977634 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6003): Launched
01:04:08.286699 run    osmo-stp_10.42.42.5(pid=6004): Launched
01:04:08.400861 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
01:04:08.941355 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6006): Launched
01:04:09.051119 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
01:04:09.322177 run               patchelf(pid=6007): Launched
01:04:09.503904 run    osmo-stp_10.42.42.5(pid=6004): ERR: Terminated: ERROR {rc=1}  [trial-2367↪gprs:trx-b200+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6004)]
01:04:09.636377 run    osmo-stp_10.42.42.5(pid=6004): stdout: 
| (launched: 2022-12-10_01:04:08.134917)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:04:09.769344 run    osmo-stp_10.42.42.5(pid=6004): stderr: 
| [0;m[38;5;43m20221210010408327 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221210010408327 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221210010408327 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221210010408328 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210010408328 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210010408328 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210010408328 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:04:09.898133 run    osmo-stp_10.42.42.5(pid=6004): stdout: 
| (launched: 2022-12-10_01:04:08.134917)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:04:10.025986 run    osmo-stp_10.42.42.5(pid=6004): stderr: 
| [0;m[38;5;43m20221210010408327 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221210010408327 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221210010408327 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221210010408328 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210010408328 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210010408328 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210010408328 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:04:10.174007 run               patchelf(pid=6007): Terminating (SIGINT)
01:04:10.347519 run               patchelf(pid=6007): Terminated: ok {rc=0}
01:04:10.379175 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=6004): Process ended prematurely: osmo-stp_10.42.42.5(pid=6004) [trial-2367↪gprs:trx-b200+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6004)]  [trial-2367↪gprs:trx-b200+mod-bts0-egprs↪ping.py:22]
01:04:10.388301 tst                       ping.py:22: Test FAILED (6.4 sec)
01:04:10.450244 run    osmo-hlr_10.42.42.2(pid=6001): ERR: Terminated: ERROR {rc=237}  [trial-2367↪gprs:trx-b200+mod-bts0-egprs↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=6001)]
01:04:10.501180 run    osmo-hlr_10.42.42.2(pid=6001): stdout: 
| (launched: 2022-12-10_01:04:07.165285) 
01:04:10.552694 run    osmo-hlr_10.42.42.2(pid=6001): stderr: 
| [0;m[1;31m20221210010407361 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221210010407362 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221210010407362 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221210010407362 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221210010407362 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221210010407362 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221210010407374 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2367/run.2022-12-10_00-40-00/gprs:trx-b200+mod-bts0-egprs/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221210010407383 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221210010407383 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221210010407383 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
01:04:10.596397 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6000): Terminating (SIGTERM)
01:04:10.637729 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6003): Terminating (SIGTERM)
01:04:10.679103 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6006): Terminating (SIGTERM)
01:04:10.688420 ---      ParallelTerminationStrategy: PID 6000 died...
01:04:10.743660 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6000): Terminated: ok {rc=0}
01:04:10.753785 ---      ParallelTerminationStrategy: PID 6003 died...
01:04:10.808817 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6003): Terminated: ok {rc=0}
01:04:10.818754 ---      ParallelTerminationStrategy: PID 6006 died...
01:04:10.873372 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6006): Terminated: ok {rc=0}
01:04:10.959455 bus                          /gobi_6: Setting Powered False
