
----------------------------------------------
trial-2367 gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend ping_idle_ping.py
----------------------------------------------
01:07:10.400390 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
01:07:10.413229 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1)
01:07:10.561543 tst                ping_idle_ping.py: using LAC 24923
01:07:10.686856 tst                ping_idle_ping.py: using RAC 188
01:07:10.813020 tst                ping_idle_ping.py: using CellId 24923
01:07:10.935827 tst                ping_idle_ping.py: using BVCI 24924
01:07:10.960670 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
01:07:10.972562 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
01:07:10.984120 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
01:07:10.996091 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
01:07:11.007686 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
01:07:11.019535 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
01:07:11.031356 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
01:07:11.042994 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
01:07:11.330338 tst             ping_idle_ping.py:24: start network...
01:07:11.461834 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
01:07:11.968676 run          create_hlr_db(pid=6216): Launched
01:07:12.151263 bus                          /gobi_6: Setting Powered False
01:07:13.171088 run          create_hlr_db(pid=6216): Terminated: ok {rc=0}
01:07:13.590325 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6218): Launched
01:07:13.904741 run    osmo-hlr_10.42.42.2(pid=6219): Launched
01:07:14.022515 run              osmo-stp_10.42.42.5: Starting osmo-stp
01:07:14.570287 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6221): Launched
01:07:14.886056 run    osmo-stp_10.42.42.5(pid=6222): Launched
01:07:14.999399 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
01:07:15.550461 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6224): Launched
01:07:15.662304 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
01:07:15.970297 run               patchelf(pid=6225): Launched
01:07:16.158821 run    osmo-stp_10.42.42.5(pid=6222): ERR: Terminated: ERROR {rc=1}  [trial-2367↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6222)]
01:07:16.295766 run    osmo-stp_10.42.42.5(pid=6222): stdout: 
| (launched: 2022-12-10_01:07:14.730362)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:07:16.433368 run    osmo-stp_10.42.42.5(pid=6222): stderr: 
| [0;m[38;5;43m20221210010714922 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221210010714922 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221210010714923 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221210010714923 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210010714923 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210010714923 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210010714924 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:07:16.566664 run    osmo-stp_10.42.42.5(pid=6222): stdout: 
| (launched: 2022-12-10_01:07:14.730362)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:07:16.699917 run    osmo-stp_10.42.42.5(pid=6222): stderr: 
| [0;m[38;5;43m20221210010714922 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221210010714922 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221210010714923 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221210010714923 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210010714923 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210010714923 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210010714924 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:07:16.853973 run               patchelf(pid=6225): Terminating (SIGINT)
01:07:17.032869 run               patchelf(pid=6225): Terminated: ok {rc=0}
01:07:17.066161 tst             ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=6222): Process ended prematurely: osmo-stp_10.42.42.5(pid=6222) [trial-2367↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6222)]  [trial-2367↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping_idle_ping.py:27]
01:07:17.075912 tst             ping_idle_ping.py:27: Test FAILED (6.7 sec)
01:07:17.139889 run    osmo-hlr_10.42.42.2(pid=6219): ERR: Terminated: ERROR {rc=237}  [trial-2367↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=6219)]
01:07:17.191241 run    osmo-hlr_10.42.42.2(pid=6219): stdout: 
| (launched: 2022-12-10_01:07:13.750111) 
01:07:17.243030 run    osmo-hlr_10.42.42.2(pid=6219): stderr: 
| [0;m[1;31m20221210010713945 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221210010713945 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221210010713945 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221210010713945 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221210010713945 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221210010713946 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221210010713958 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2367/run.2022-12-10_00-40-00/gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221210010713966 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221210010713966 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221210010713966 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
01:07:17.287468 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6218): Terminating (SIGTERM)
01:07:17.329339 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6221): Terminating (SIGTERM)
01:07:17.370895 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6224): Terminating (SIGTERM)
01:07:17.380604 ---      ParallelTerminationStrategy: PID 6218 died...
01:07:17.436126 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6218): Terminated: ok {rc=0}
01:07:17.446267 ---      ParallelTerminationStrategy: PID 6221 died...
01:07:17.501449 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6221): Terminated: ok {rc=0}
01:07:17.511727 ---      ParallelTerminationStrategy: PID 6224 died...
01:07:17.567132 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6224): Terminated: ok {rc=0}
01:07:17.653601 bus                          /gobi_6: Setting Powered False
