
----------------------------------------------
trial-2368 gprs:nanobts+band-900+mod-bts0-egprs ping_idle_ping.py
----------------------------------------------
03:18:43.400421 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
03:18:43.411946 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x bts (candidates: 1)
03:18:43.550471 tst                ping_idle_ping.py: using LAC 25620
03:18:43.667450 tst                ping_idle_ping.py: using RAC 120
03:18:43.788934 tst                ping_idle_ping.py: using CellId 25620
03:18:43.913695 tst                ping_idle_ping.py: using BVCI 25621
03:18:43.938351 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
03:18:43.950122 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
03:18:43.961529 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
03:18:43.973067 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
03:18:43.984293 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
03:18:43.995486 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
03:18:44.010310 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
03:18:44.022022 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x modem (candidates: 4)
03:18:44.299378 tst             ping_idle_ping.py:24: start network...
03:18:44.433943 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
03:18:44.916106 run         create_hlr_db(pid=18768): Launched
03:18:45.106086 bus                          /gobi_6: Setting Powered False
03:18:46.119011 run         create_hlr_db(pid=18768): Terminated: ok {rc=0}
03:18:46.552334 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18770): Launched
03:18:46.963460 run   osmo-hlr_10.42.42.2(pid=18771): Launched
03:18:47.144657 run              osmo-stp_10.42.42.5: Starting osmo-stp
03:18:47.718094 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18773): Launched
03:18:48.039220 run   osmo-stp_10.42.42.5(pid=18774): Launched
03:18:48.156882 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
03:18:48.700414 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18776): Launched
03:18:48.806677 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
03:18:49.068838 run              patchelf(pid=18777): Launched
03:18:49.251618 run   osmo-stp_10.42.42.5(pid=18774): ERR: Terminated: ERROR {rc=1}  [trial-2368↪gprs:nanobts+band-900+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18774)]
03:18:49.389064 run   osmo-stp_10.42.42.5(pid=18774): stdout: 
| (launched: 2022-12-10_03:18:47.882499)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
03:18:49.524011 run   osmo-stp_10.42.42.5(pid=18774): stderr: 
| [0;m[38;5;43m20221210031848077 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221210031848077 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221210031848078 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221210031848078 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210031848079 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210031848079 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210031848079 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
03:18:49.647767 run   osmo-stp_10.42.42.5(pid=18774): stdout: 
| (launched: 2022-12-10_03:18:47.882499)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
03:18:49.772290 run   osmo-stp_10.42.42.5(pid=18774): stderr: 
| [0;m[38;5;43m20221210031848077 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221210031848077 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221210031848078 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221210031848078 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210031848079 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210031848079 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210031848079 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
03:18:49.915484 run              patchelf(pid=18777): Terminating (SIGINT)
03:18:50.091951 run              patchelf(pid=18777): Terminated: ok {rc=0}
03:18:50.124563 tst             ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=18774): Process ended prematurely: osmo-stp_10.42.42.5(pid=18774) [trial-2368↪gprs:nanobts+band-900+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18774)]  [trial-2368↪gprs:nanobts+band-900+mod-bts0-egprs↪ping_idle_ping.py:27]
03:18:50.133603 tst             ping_idle_ping.py:27: Test FAILED (6.7 sec)
03:18:50.196682 run   osmo-hlr_10.42.42.2(pid=18771): ERR: Terminated: ERROR {rc=237}  [trial-2368↪gprs:nanobts+band-900+mod-bts0-egprs↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=18771)]
03:18:50.248219 run   osmo-hlr_10.42.42.2(pid=18771): stdout: 
| (launched: 2022-12-10_03:18:46.706940) 
03:18:50.303013 run   osmo-hlr_10.42.42.2(pid=18771): stderr: 
| [0;m[1;31m20221210031847049 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221210031847049 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221210031847049 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221210031847049 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221210031847049 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221210031847049 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221210031847071 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2368/run.2022-12-10_02-07-09/gprs:nanobts+band-900+mod-bts0-egprs/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221210031847087 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221210031847088 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221210031847088 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
03:18:50.345306 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18770): Terminating (SIGTERM)
03:18:50.384822 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18773): Terminating (SIGTERM)
03:18:50.424764 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18776): Terminating (SIGTERM)
03:18:50.434169 ---      ParallelTerminationStrategy: PID 18770 died...
03:18:50.487215 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18770): Terminated: ok {rc=0}
03:18:50.497255 ---      ParallelTerminationStrategy: PID 18773 died...
03:18:50.551079 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18773): Terminated: ok {rc=0}
03:18:50.561141 ---      ParallelTerminationStrategy: PID 18776 died...
03:18:50.619812 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18776): Terminated: ok {rc=0}
03:18:50.706678 bus                          /gobi_6: Setting Powered False
