
----------------------------------------------
trial-2368 gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo cs_paging_gprs_active.py
----------------------------------------------
03:06:33.350703 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
03:06:33.361771 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1)
03:06:33.513423 tst         cs_paging_gprs_active.py: using LAC 25555
03:06:33.633033 tst         cs_paging_gprs_active.py: using RAC 55
03:06:33.751208 tst         cs_paging_gprs_active.py: using CellId 25555
03:06:33.870904 tst         cs_paging_gprs_active.py: using BVCI 25556
03:06:33.893802 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
03:06:33.905249 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
03:06:33.916050 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
03:06:33.927122 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
03:06:33.938179 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
03:06:33.949211 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
03:06:33.960266 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
03:06:33.971208 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
03:06:33.982484 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4)
03:06:34.103380 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4)
03:06:34.396112 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003...
03:06:34.529558 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
03:06:34.860372 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17630): Launched
03:06:35.135208 run iperf3-srv_10.42.42.10(pid=17631): Launched
03:06:35.331305 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004...
03:06:35.464643 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
03:06:35.799430 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17632): Launched
03:06:36.075294 run iperf3-srv_10.42.42.10(pid=17633): Launched
03:06:36.272241 tst      cs_paging_gprs_active.py:38: start network...
03:06:36.406422 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
03:06:36.921517 run         create_hlr_db(pid=17634): Launched
03:06:37.106099 bus                          /gobi_6: Setting Powered False
03:06:38.126900 run         create_hlr_db(pid=17634): Terminated: ok {rc=0}
03:06:38.528890 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17636): Launched
03:06:38.829722 run   osmo-hlr_10.42.42.2(pid=17637): Launched
03:06:38.947029 run              osmo-stp_10.42.42.5: Starting osmo-stp
03:06:39.473794 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17639): Launched
03:06:39.774449 run   osmo-stp_10.42.42.5(pid=17640): Launched
03:06:39.884052 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
03:06:40.402216 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17642): Launched
03:06:40.508094 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
03:06:40.774895 run              patchelf(pid=17643): Launched
03:06:40.951173 run   osmo-stp_10.42.42.5(pid=17640): ERR: Terminated: ERROR {rc=1}  [trial-2368↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17640)]
03:06:41.079682 run   osmo-stp_10.42.42.5(pid=17640): stdout: 
| (launched: 2022-12-10_03:06:39.625572)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
03:06:41.208813 run   osmo-stp_10.42.42.5(pid=17640): stderr: 
| [0;m[38;5;43m20221210030639796 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221210030639797 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221210030639797 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221210030639797 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210030639798 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210030639798 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210030639798 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
03:06:41.333200 run   osmo-stp_10.42.42.5(pid=17640): stdout: 
| (launched: 2022-12-10_03:06:39.625572)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
03:06:41.456323 run   osmo-stp_10.42.42.5(pid=17640): stderr: 
| [0;m[38;5;43m20221210030639796 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221210030639797 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221210030639797 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221210030639797 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210030639798 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210030639798 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210030639798 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
03:06:41.600426 run              patchelf(pid=17643): Terminating (SIGINT)
03:06:41.770457 run              patchelf(pid=17643): Terminated: ok {rc=0}
03:06:41.801776 tst      cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=17640): Process ended prematurely: osmo-stp_10.42.42.5(pid=17640) [trial-2368↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17640)]  [trial-2368↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38]
03:06:41.810867 tst      cs_paging_gprs_active.py:38: Test FAILED (8.5 sec)
03:06:41.871292 run   osmo-hlr_10.42.42.2(pid=17637): ERR: Terminated: ERROR {rc=237}  [trial-2368↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=17637)]
03:06:41.920449 run   osmo-hlr_10.42.42.2(pid=17637): stdout: 
| (launched: 2022-12-10_03:06:38.681225) 
03:06:41.970272 run   osmo-hlr_10.42.42.2(pid=17637): stderr: 
| [0;m[1;31m20221210030638856 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221210030638856 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221210030638856 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221210030638857 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221210030638857 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221210030638857 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221210030638868 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2368/run.2022-12-10_02-07-09/gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221210030638877 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221210030638877 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221210030638877 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
03:06:42.012269 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17630): Terminating (SIGTERM)
03:06:42.052250 run iperf3-srv_10.42.42.10(pid=17631): Terminating (SIGTERM)
03:06:42.091786 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17632): Terminating (SIGTERM)
03:06:42.131537 run iperf3-srv_10.42.42.10(pid=17633): Terminating (SIGTERM)
03:06:42.171189 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17636): Terminating (SIGTERM)
03:06:42.211160 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17639): Terminating (SIGTERM)
03:06:42.250604 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17642): Terminating (SIGTERM)
03:06:42.260073 ---      ParallelTerminationStrategy: PID 17630 died...
03:06:42.313055 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17630): Terminated: ok {rc=0}
03:06:42.322825 ---      ParallelTerminationStrategy: PID 17631 died...
03:06:42.375746 run iperf3-srv_10.42.42.10(pid=17631): Terminated {rc=256}
03:06:42.385344 ---      ParallelTerminationStrategy: PID 17632 died...
03:06:42.438440 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17632): Terminated: ok {rc=0}
03:06:42.448146 ---      ParallelTerminationStrategy: PID 17633 died...
03:06:42.501148 run iperf3-srv_10.42.42.10(pid=17633): Terminated {rc=256}
03:06:42.510618 ---      ParallelTerminationStrategy: PID 17636 died...
03:06:42.563711 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17636): Terminated: ok {rc=0}
03:06:42.573607 ---      ParallelTerminationStrategy: PID 17639 died...
03:06:42.626617 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17639): Terminated: ok {rc=0}
03:06:42.636462 ---      ParallelTerminationStrategy: PID 17642 died...
03:06:42.689610 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17642): Terminated: ok {rc=0}
03:06:42.772631 bus                          /gobi_0: Setting Powered False
03:06:43.879280 bus                          /gobi_0: Setting Powered False
03:06:44.986011 bus                          /gobi_6: Setting Powered False
