
----------------------------------------------
trial-2369 gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py
----------------------------------------------
04:00:38.854051 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
04:00:38.865476 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1)
04:00:39.006078 tst         cs_paging_gprs_active.py: using LAC 25841
04:00:39.124089 tst         cs_paging_gprs_active.py: using RAC 86
04:00:39.243967 tst         cs_paging_gprs_active.py: using CellId 25841
04:00:39.364232 tst         cs_paging_gprs_active.py: using BVCI 25842
04:00:39.387909 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
04:00:39.399360 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
04:00:39.410717 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
04:00:39.422391 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
04:00:39.434082 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
04:00:39.445820 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
04:00:39.457492 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
04:00:39.468870 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
04:00:39.480697 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
04:00:39.601845 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
04:00:39.896342 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003...
04:00:40.032242 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
04:00:40.368529 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23865): Launched
04:00:40.648926 run iperf3-srv_10.42.42.10(pid=23866): Launched
04:00:40.848656 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004...
04:00:40.984484 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
04:00:41.321315 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23867): Launched
04:00:41.601899 run iperf3-srv_10.42.42.10(pid=23868): Launched
04:00:41.801957 tst      cs_paging_gprs_active.py:38: start network...
04:00:41.937908 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
04:00:42.458792 run         create_hlr_db(pid=23869): Launched
04:00:42.646863 bus                          /gobi_6: Setting Powered False
04:00:43.669354 run         create_hlr_db(pid=23869): Terminated: ok {rc=0}
04:00:44.078391 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23871): Launched
04:00:44.383697 run   osmo-hlr_10.42.42.2(pid=23872): Launched
04:00:44.504102 run              osmo-stp_10.42.42.5: Starting osmo-stp
04:00:45.066985 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23874): Launched
04:00:45.391414 run   osmo-stp_10.42.42.5(pid=23875): Launched
04:00:45.509796 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
04:00:46.125910 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23877): Launched
04:00:46.285789 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
04:00:46.586639 run              patchelf(pid=23878): Launched
04:00:46.772373 run   osmo-stp_10.42.42.5(pid=23875): ERR: Terminated: ERROR {rc=1}  [trial-2369↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23875)]
04:00:46.907986 run   osmo-stp_10.42.42.5(pid=23875): stdout: 
| (launched: 2022-12-10_04:00:45.232110)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
04:00:47.044478 run   osmo-stp_10.42.42.5(pid=23875): stderr: 
| [0;m[38;5;43m20221210040045427 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221210040045427 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221210040045428 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221210040045428 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210040045428 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210040045428 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210040045429 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
04:00:47.175135 run   osmo-stp_10.42.42.5(pid=23875): stdout: 
| (launched: 2022-12-10_04:00:45.232110)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
04:00:47.303935 run   osmo-stp_10.42.42.5(pid=23875): stderr: 
| [0;m[38;5;43m20221210040045427 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221210040045427 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221210040045428 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221210040045428 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210040045428 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210040045428 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210040045429 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
04:00:47.450424 run              patchelf(pid=23878): Terminating (SIGINT)
04:00:47.622289 run              patchelf(pid=23878): Terminated: ok {rc=0}
04:00:47.653963 tst      cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=23875): Process ended prematurely: osmo-stp_10.42.42.5(pid=23875) [trial-2369↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23875)]  [trial-2369↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38]
04:00:47.663724 tst      cs_paging_gprs_active.py:38: Test FAILED (8.8 sec)
04:00:47.724740 run   osmo-hlr_10.42.42.2(pid=23872): ERR: Terminated: ERROR {rc=237}  [trial-2369↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=23872)]
04:00:47.774203 run   osmo-hlr_10.42.42.2(pid=23872): stdout: 
| (launched: 2022-12-10_04:00:44.233342) 
04:00:47.824321 run   osmo-hlr_10.42.42.2(pid=23872): stderr: 
| [0;m[1;31m20221210040044412 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221210040044412 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221210040044412 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221210040044412 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221210040044412 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221210040044412 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221210040044424 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2369/run.2022-12-10_03-34-39/gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221210040044432 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221210040044433 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221210040044433 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
04:00:47.866476 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23865): Terminating (SIGTERM)
04:00:47.906648 run iperf3-srv_10.42.42.10(pid=23866): Terminating (SIGTERM)
04:00:47.946679 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23867): Terminating (SIGTERM)
04:00:47.986594 run iperf3-srv_10.42.42.10(pid=23868): Terminating (SIGTERM)
04:00:48.026705 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23871): Terminating (SIGTERM)
04:00:48.066500 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23874): Terminating (SIGTERM)
04:00:48.106378 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23877): Terminating (SIGTERM)
04:00:48.115875 ---      ParallelTerminationStrategy: PID 23865 died...
04:00:48.169147 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23865): Terminated: ok {rc=0}
04:00:48.178972 ---      ParallelTerminationStrategy: PID 23866 died...
04:00:48.231633 run iperf3-srv_10.42.42.10(pid=23866): Terminated {rc=256}
04:00:48.241562 ---      ParallelTerminationStrategy: PID 23867 died...
04:00:48.294760 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23867): Terminated: ok {rc=0}
04:00:48.304258 ---      ParallelTerminationStrategy: PID 23868 died...
04:00:48.356900 run iperf3-srv_10.42.42.10(pid=23868): Terminated {rc=256}
04:00:48.366902 ---      ParallelTerminationStrategy: PID 23871 died...
04:00:48.420367 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23871): Terminated: ok {rc=0}
04:00:48.430182 ---      ParallelTerminationStrategy: PID 23874 died...
04:00:48.483151 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23874): Terminated: ok {rc=0}
04:00:48.493182 ---      ParallelTerminationStrategy: PID 23877 died...
04:00:48.546115 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23877): Terminated: ok {rc=0}
04:00:48.632808 bus                          /gobi_0: Setting Powered False
04:00:49.736160 bus                          /gobi_0: Setting Powered False
04:00:50.841556 bus                          /gobi_6: Setting Powered False
