
----------------------------------------------
trial-2369 gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py
----------------------------------------------
04:17:33.205719 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
04:17:33.216935 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1)
04:17:33.352793 tst         cs_paging_gprs_active.py: using LAC 25932
04:17:33.466527 tst         cs_paging_gprs_active.py: using RAC 177
04:17:33.588218 tst         cs_paging_gprs_active.py: using CellId 25932
04:17:33.710665 tst         cs_paging_gprs_active.py: using BVCI 25933
04:17:33.734675 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
04:17:33.746513 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
04:17:33.758195 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
04:17:33.769911 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
04:17:33.781786 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
04:17:33.793888 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
04:17:33.805601 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
04:17:33.817119 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
04:17:33.828874 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
04:17:33.944821 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
04:17:34.214599 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003...
04:17:34.336197 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
04:17:34.638543 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25343): Launched
04:17:34.889462 run iperf3-srv_10.42.42.10(pid=25344): Launched
04:17:35.067665 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004...
04:17:35.189135 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
04:17:35.492488 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25345): Launched
04:17:35.742850 run iperf3-srv_10.42.42.10(pid=25346): Launched
04:17:35.921440 tst      cs_paging_gprs_active.py:38: start network...
04:17:36.045572 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
04:17:36.506212 run         create_hlr_db(pid=25354): Launched
04:17:36.675076 bus                          /gobi_6: Setting Powered False
04:17:37.696752 run         create_hlr_db(pid=25354): Terminated: ok {rc=0}
04:17:38.086561 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25356): Launched
04:17:38.379357 run   osmo-hlr_10.42.42.2(pid=25357): Launched
04:17:38.492395 run              osmo-stp_10.42.42.5: Starting osmo-stp
04:17:39.009859 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25359): Launched
04:17:39.301160 run   osmo-stp_10.42.42.5(pid=25360): Launched
04:17:39.407145 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
04:17:39.915882 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25362): Launched
04:17:40.028540 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
04:17:40.299543 run              patchelf(pid=25363): Launched
04:17:40.482386 run   osmo-stp_10.42.42.5(pid=25360): ERR: Terminated: ERROR {rc=1}  [trial-2369↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25360)]
04:17:40.616428 run   osmo-stp_10.42.42.5(pid=25360): stdout: 
| (launched: 2022-12-10_04:17:39.158247)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
04:17:40.750889 run   osmo-stp_10.42.42.5(pid=25360): stderr: 
| [0;m[38;5;43m20221210041739326 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221210041739326 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221210041739327 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221210041739327 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210041739329 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210041739329 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210041739329 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
04:17:40.880105 run   osmo-stp_10.42.42.5(pid=25360): stdout: 
| (launched: 2022-12-10_04:17:39.158247)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
04:17:41.008528 run   osmo-stp_10.42.42.5(pid=25360): stderr: 
| [0;m[38;5;43m20221210041739326 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221210041739326 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221210041739327 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221210041739327 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210041739329 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210041739329 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210041739329 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
04:17:41.157489 run              patchelf(pid=25363): Terminating (SIGINT)
04:17:41.331910 run              patchelf(pid=25363): Terminated: ok {rc=0}
04:17:41.364519 tst      cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=25360): Process ended prematurely: osmo-stp_10.42.42.5(pid=25360) [trial-2369↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25360)]  [trial-2369↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38]
04:17:41.374734 tst      cs_paging_gprs_active.py:38: Test FAILED (8.2 sec)
04:17:41.436169 run   osmo-hlr_10.42.42.2(pid=25357): ERR: Terminated: ERROR {rc=237}  [trial-2369↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=25357)]
04:17:41.486781 run   osmo-hlr_10.42.42.2(pid=25357): stdout: 
| (launched: 2022-12-10_04:17:38.235186) 
04:17:41.538263 run   osmo-hlr_10.42.42.2(pid=25357): stderr: 
| [0;m[1;31m20221210041738411 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221210041738411 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221210041738411 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221210041738411 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221210041738411 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221210041738411 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221210041738424 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2369/run.2022-12-10_03-34-39/gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221210041738434 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221210041738434 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221210041738434 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
04:17:41.581721 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25343): Terminating (SIGTERM)
04:17:41.622578 run iperf3-srv_10.42.42.10(pid=25344): Terminating (SIGTERM)
04:17:41.663590 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25345): Terminating (SIGTERM)
04:17:41.704398 run iperf3-srv_10.42.42.10(pid=25346): Terminating (SIGTERM)
04:17:41.745423 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25356): Terminating (SIGTERM)
04:17:41.786300 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25359): Terminating (SIGTERM)
04:17:41.827244 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25362): Terminating (SIGTERM)
04:17:41.836691 ---      ParallelTerminationStrategy: PID 25343 died...
04:17:41.892414 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25343): Terminated: ok {rc=0}
04:17:41.902417 ---      ParallelTerminationStrategy: PID 25344 died...
04:17:41.956789 run iperf3-srv_10.42.42.10(pid=25344): Terminated {rc=256}
04:17:41.966653 ---      ParallelTerminationStrategy: PID 25345 died...
04:17:42.021426 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25345): Terminated: ok {rc=0}
04:17:42.031212 ---      ParallelTerminationStrategy: PID 25346 died...
04:17:42.085394 run iperf3-srv_10.42.42.10(pid=25346): Terminated {rc=256}
04:17:42.095112 ---      ParallelTerminationStrategy: PID 25356 died...
04:17:42.149244 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25356): Terminated: ok {rc=0}
04:17:42.158974 ---      ParallelTerminationStrategy: PID 25359 died...
04:17:42.213383 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25359): Terminated: ok {rc=0}
04:17:42.223099 ---      ParallelTerminationStrategy: PID 25362 died...
04:17:42.277254 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25362): Terminated: ok {rc=0}
04:17:42.363270 bus                          /gobi_0: Setting Powered False
04:17:43.468565 bus                          /gobi_0: Setting Powered False
04:17:44.578303 bus                          /gobi_6: Setting Powered False
