
----------------------------------------------
trial-2370 dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo switch_tch_pdch.py
----------------------------------------------
06:27:48.689790 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
06:27:48.700904 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x bts (candidates: 1)
06:27:48.845086 tst               switch_tch_pdch.py: using LAC 26483
06:27:48.957999 tst               switch_tch_pdch.py: using RAC 218
06:27:49.068866 tst               switch_tch_pdch.py: using CellId 26483
06:27:49.179313 tst               switch_tch_pdch.py: using BVCI 26484
06:27:49.201323 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
06:27:49.212506 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
06:27:49.223547 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
06:27:49.234774 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
06:27:49.245851 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
06:27:49.257039 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
06:27:49.268269 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
06:27:49.279322 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2)
06:27:49.390836 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2)
06:27:49.674426 tst            switch_tch_pdch.py:51: start network...
06:27:49.802575 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
06:27:50.266429 run          create_hlr_db(pid=4636): Launched
06:27:50.391797 bus                          /gobi_6: Setting Powered False
06:27:51.465088 run          create_hlr_db(pid=4636): Terminated: ok {rc=0}
06:27:51.827771 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4638): Launched
06:27:52.114735 run    osmo-hlr_10.42.42.2(pid=4639): Launched
06:27:52.218606 run              osmo-stp_10.42.42.5: Starting osmo-stp
06:27:52.694494 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4641): Launched
06:27:52.980924 run    osmo-stp_10.42.42.5(pid=4642): Launched
06:27:53.085770 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
06:27:53.561646 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4644): Launched
06:27:53.663437 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
06:27:53.914113 run               patchelf(pid=4645): Launched
06:27:54.083004 run    osmo-stp_10.42.42.5(pid=4642): ERR: Terminated: ERROR {rc=1}  [trial-2370↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4642)]
06:27:54.206627 run    osmo-stp_10.42.42.5(pid=4642): stdout: 
| (launched: 2022-12-10_06:27:52.839088)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
06:27:54.330281 run    osmo-stp_10.42.42.5(pid=4642): stderr: 
| [0;m[38;5;43m20221210062753008 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221210062753008 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221210062753008 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221210062753008 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210062753009 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210062753009 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210062753009 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
06:27:54.449394 run    osmo-stp_10.42.42.5(pid=4642): stdout: 
| (launched: 2022-12-10_06:27:52.839088)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
06:27:54.567225 run    osmo-stp_10.42.42.5(pid=4642): stderr: 
| [0;m[38;5;43m20221210062753008 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221210062753008 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221210062753008 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221210062753008 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210062753009 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210062753009 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210062753009 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
06:27:54.704147 run               patchelf(pid=4645): Terminating (SIGINT)
06:27:54.866106 run               patchelf(pid=4645): Terminated: ok {rc=0}
06:27:54.895759 tst            switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=4642): Process ended prematurely: osmo-stp_10.42.42.5(pid=4642) [trial-2370↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4642)]  [trial-2370↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54]
06:27:54.904390 tst            switch_tch_pdch.py:54: Test FAILED (6.2 sec)
06:27:54.963951 run    osmo-hlr_10.42.42.2(pid=4639): ERR: Terminated: ERROR {rc=237}  [trial-2370↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=4639)]
06:27:55.012415 run    osmo-hlr_10.42.42.2(pid=4639): stdout: 
| (launched: 2022-12-10_06:27:51.973308) 
06:27:55.061575 run    osmo-hlr_10.42.42.2(pid=4639): stderr: 
| [0;m[1;31m20221210062752147 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221210062752147 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221210062752147 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221210062752147 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221210062752147 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221210062752147 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221210062752159 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2370/run.2022-12-10_05-27-43/dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221210062752167 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221210062752167 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221210062752167 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
06:27:55.102932 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4638): Terminating (SIGTERM)
06:27:55.142248 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4641): Terminating (SIGTERM)
06:27:55.181553 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4644): Terminating (SIGTERM)
06:27:55.190917 ---      ParallelTerminationStrategy: PID 4638 died...
06:27:55.243429 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4638): Terminated: ok {rc=0}
06:27:55.253093 ---      ParallelTerminationStrategy: PID 4641 died...
06:27:55.305198 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4641): Terminated: ok {rc=0}
06:27:55.314806 ---      ParallelTerminationStrategy: PID 4644 died...
06:27:55.366962 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4644): Terminated: ok {rc=0}
06:27:55.455269 bus                          /gobi_0: Setting Powered False
06:27:56.557086 bus                          /gobi_0: Setting Powered False
06:27:57.661436 bus                          /gobi_6: Setting Powered False
