
----------------------------------------------
trial-2370 gprs:trx-b200+mod-bts0-dynts-osmo ping.py
----------------------------------------------
05:53:49.482818 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
05:53:49.495361 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1)
05:53:49.661426 tst                          ping.py: using LAC 26300
05:53:49.786728 tst                          ping.py: using RAC 35
05:53:49.910542 tst                          ping.py: using CellId 26300
05:53:50.033719 tst                          ping.py: using BVCI 26301
05:53:50.058292 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
05:53:50.069823 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
05:53:50.081140 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
05:53:50.092442 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
05:53:50.103847 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
05:53:50.115138 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
05:53:50.126445 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
05:53:50.137761 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4)
05:53:50.424239 tst                       ping.py:19: start network...
05:53:50.554961 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
05:53:51.057511 run           create_hlr_db(pid=540): Launched
05:53:51.240048 bus                          /gobi_6: Setting Powered False
05:53:52.260031 run           create_hlr_db(pid=540): Terminated: ok {rc=0}
05:53:52.659648 run pcap-recorder_any(filters='host 10.42.42.2')(pid=542): Launched
05:53:52.955232 run     osmo-hlr_10.42.42.2(pid=543): Launched
05:53:53.068500 run              osmo-stp_10.42.42.5: Starting osmo-stp
05:53:53.600018 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=545): Launched
05:53:53.895744 run     osmo-stp_10.42.42.5(pid=546): Launched
05:53:54.005486 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
05:53:54.520265 run pcap-recorder_any(filters='host 10.42.42.6')(pid=548): Launched
05:53:54.625005 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
05:53:54.884000 run                patchelf(pid=549): Launched
05:53:55.056917 run     osmo-stp_10.42.42.5(pid=546): ERR: Terminated: ERROR {rc=1}  [trial-2370↪gprs:trx-b200+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=546)]
05:53:55.183235 run     osmo-stp_10.42.42.5(pid=546): stdout: 
| (launched: 2022-12-10_05:53:53.749330)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
05:53:55.310053 run     osmo-stp_10.42.42.5(pid=546): stderr: 
| [0;m[38;5;43m20221210055353918 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221210055353918 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221210055353918 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221210055353918 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210055353921 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210055353921 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210055353921 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
05:53:55.431806 run     osmo-stp_10.42.42.5(pid=546): stdout: 
| (launched: 2022-12-10_05:53:53.749330)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
05:53:55.552054 run     osmo-stp_10.42.42.5(pid=546): stderr: 
| [0;m[38;5;43m20221210055353918 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221210055353918 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221210055353918 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221210055353918 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210055353921 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210055353921 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210055353921 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
05:53:55.693069 run                patchelf(pid=549): Terminating (SIGINT)
05:53:55.858416 run                patchelf(pid=549): Terminated: ok {rc=0}
05:53:55.888643 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=546): Process ended prematurely: osmo-stp_10.42.42.5(pid=546) [trial-2370↪gprs:trx-b200+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=546)]  [trial-2370↪gprs:trx-b200+mod-bts0-dynts-osmo↪ping.py:22]
05:53:55.897446 tst                       ping.py:22: Test FAILED (6.4 sec)
05:53:55.957067 run     osmo-hlr_10.42.42.2(pid=543): ERR: Terminated: ERROR {rc=237}  [trial-2370↪gprs:trx-b200+mod-bts0-dynts-osmo↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=543)]
05:53:56.005274 run     osmo-hlr_10.42.42.2(pid=543): stdout: 
| (launched: 2022-12-10_05:53:52.809373) 
05:53:56.054564 run     osmo-hlr_10.42.42.2(pid=543): stderr: 
| [0;m[1;31m20221210055352986 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221210055352986 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221210055352986 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221210055352986 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221210055352986 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221210055352986 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221210055352998 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2370/run.2022-12-10_05-27-43/gprs:trx-b200+mod-bts0-dynts-osmo/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221210055353009 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221210055353010 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221210055353010 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
05:53:56.095991 run pcap-recorder_any(filters='host 10.42.42.2')(pid=542): Terminating (SIGTERM)
05:53:56.135244 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=545): Terminating (SIGTERM)
05:53:56.174394 run pcap-recorder_any(filters='host 10.42.42.6')(pid=548): Terminating (SIGTERM)
05:53:56.183683 ---      ParallelTerminationStrategy: PID 542 died...
05:53:56.236240 run pcap-recorder_any(filters='host 10.42.42.2')(pid=542): Terminated: ok {rc=0}
05:53:56.245919 ---      ParallelTerminationStrategy: PID 545 died...
05:53:56.298102 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=545): Terminated: ok {rc=0}
05:53:56.307652 ---      ParallelTerminationStrategy: PID 548 died...
05:53:56.360211 run pcap-recorder_any(filters='host 10.42.42.6')(pid=548): Terminated: ok {rc=0}
05:53:56.447523 bus                          /gobi_6: Setting Powered False
