
----------------------------------------------
trial-2370 gprs:trx-lms-limenet-micro+mod-bts0-egprs iperf3.py
----------------------------------------------
06:24:54.567164 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
06:24:54.579070 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x bts (candidates: 1)
06:24:54.710533 tst                        iperf3.py: using LAC 26468
06:24:54.825181 tst                        iperf3.py: using RAC 203
06:24:54.947251 tst                        iperf3.py: using CellId 26468
06:24:55.072078 tst                        iperf3.py: using BVCI 26469
06:24:55.096040 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
06:24:55.107468 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
06:24:55.118621 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
06:24:55.129849 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
06:24:55.140902 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
06:24:55.152101 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
06:24:55.163393 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
06:24:55.174499 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
06:24:55.185780 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x modem (candidates: 4)
06:24:55.454952 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
06:24:55.575818 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
06:24:55.877519 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4430): Launched
06:24:56.127973 run iperf3-srv_10.42.42.10(pid=4431): Launched
06:24:56.304328 tst                      iperf3.py:8: start network...
06:24:56.424600 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
06:24:56.884274 run          create_hlr_db(pid=4432): Launched
06:24:57.051093 bus                          /gobi_6: Setting Powered False
06:24:58.073524 run          create_hlr_db(pid=4432): Terminated: ok {rc=0}
06:24:58.487182 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4434): Launched
06:24:58.798011 run    osmo-hlr_10.42.42.2(pid=4435): Launched
06:24:58.912379 run              osmo-stp_10.42.42.5: Starting osmo-stp
06:24:59.452541 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4437): Launched
06:24:59.763216 run    osmo-stp_10.42.42.5(pid=4438): Launched
06:24:59.875354 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
06:25:00.418875 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4440): Launched
06:25:00.529728 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
06:25:00.801193 run               patchelf(pid=4441): Launched
06:25:00.992863 run    osmo-stp_10.42.42.5(pid=4438): ERR: Terminated: ERROR {rc=1}  [trial-2370↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4438)]
06:25:01.128668 run    osmo-stp_10.42.42.5(pid=4438): stdout: 
| (launched: 2022-12-10_06:24:59.610251)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
06:25:01.264663 run    osmo-stp_10.42.42.5(pid=4438): stderr: 
| [0;m[38;5;43m20221210062459800 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221210062459800 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221210062459800 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221210062459801 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210062459801 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210062459801 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210062459801 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
06:25:01.396001 run    osmo-stp_10.42.42.5(pid=4438): stdout: 
| (launched: 2022-12-10_06:24:59.610251)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
06:25:01.526292 run    osmo-stp_10.42.42.5(pid=4438): stderr: 
| [0;m[38;5;43m20221210062459800 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221210062459800 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221210062459800 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221210062459801 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210062459801 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210062459801 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210062459801 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
06:25:01.687318 run               patchelf(pid=4441): Terminating (SIGINT)
06:25:01.882716 run               patchelf(pid=4441): Terminated: ok {rc=0}
06:25:01.916453 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=4438): Process ended prematurely: osmo-stp_10.42.42.5(pid=4438) [trial-2370↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4438)]  [trial-2370↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8]
06:25:01.927152 tst                      iperf3.py:8: Test FAILED (7.4 sec)
06:25:01.992386 run    osmo-hlr_10.42.42.2(pid=4435): ERR: Terminated: ERROR {rc=237}  [trial-2370↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=4435)]
06:25:02.044322 run    osmo-hlr_10.42.42.2(pid=4435): stdout: 
| (launched: 2022-12-10_06:24:58.645491) 
06:25:02.096320 run    osmo-hlr_10.42.42.2(pid=4435): stderr: 
| [0;m[1;31m20221210062458840 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221210062458840 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221210062458840 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221210062458840 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221210062458840 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221210062458840 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221210062458853 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2370/run.2022-12-10_05-27-43/gprs:trx-lms-limenet-micro+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221210062458861 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221210062458862 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221210062458862 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
06:25:02.141602 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4430): Terminating (SIGTERM)
06:25:02.184440 run iperf3-srv_10.42.42.10(pid=4431): Terminating (SIGTERM)
06:25:02.229106 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4434): Terminating (SIGTERM)
06:25:02.270580 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4437): Terminating (SIGTERM)
06:25:02.312079 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4440): Terminating (SIGTERM)
06:25:02.321614 ---      ParallelTerminationStrategy: PID 4430 died...
06:25:02.376655 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4430): Terminated: ok {rc=0}
06:25:02.385969 ---      ParallelTerminationStrategy: PID 4431 died...
06:25:02.437754 run iperf3-srv_10.42.42.10(pid=4431): Terminated {rc=256}
06:25:02.447337 ---      ParallelTerminationStrategy: PID 4434 died...
06:25:02.499172 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4434): Terminated: ok {rc=0}
06:25:02.508416 ---      ParallelTerminationStrategy: PID 4437 died...
06:25:02.560132 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4437): Terminated: ok {rc=0}
06:25:02.569717 ---      ParallelTerminationStrategy: PID 4440 died...
06:25:02.621508 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4440): Terminated: ok {rc=0}
06:25:02.707748 bus                          /gobi_6: Setting Powered False
