
----------------------------------------------
trial-2371 gprs:nanobts+band-1900+mod-bts0-egprs iperf3.py
----------------------------------------------
07:58:19.566695 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
07:58:19.578451 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x bts (candidates: 1)
07:58:19.710960 tst                        iperf3.py: using LAC 26967
07:58:19.825805 tst                        iperf3.py: using RAC 192
07:58:19.948605 tst                        iperf3.py: using CellId 26967
07:58:20.068377 tst                        iperf3.py: using BVCI 26968
07:58:20.090838 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
07:58:20.102121 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
07:58:20.113070 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
07:58:20.124711 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
07:58:20.136253 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
07:58:20.147925 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
07:58:20.159769 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
07:58:20.171252 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
07:58:20.182861 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x modem (candidates: 4)
07:58:20.471974 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
07:58:20.602949 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
07:58:20.927810 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14096): Launched
07:58:21.197920 run iperf3-srv_10.42.42.10(pid=14097): Launched
07:58:21.389398 tst                      iperf3.py:8: start network...
07:58:21.519982 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
07:58:22.022517 run         create_hlr_db(pid=14098): Launched
07:58:22.204228 bus                          /gobi_6: Setting Powered False
07:58:23.225259 run         create_hlr_db(pid=14098): Terminated: ok {rc=0}
07:58:23.619537 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14100): Launched
07:58:23.913605 run   osmo-hlr_10.42.42.2(pid=14101): Launched
07:58:24.029107 run              osmo-stp_10.42.42.5: Starting osmo-stp
07:58:24.545624 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14103): Launched
07:58:24.839347 run   osmo-stp_10.42.42.5(pid=14104): Launched
07:58:24.946826 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
07:58:25.455598 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14106): Launched
07:58:25.559968 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
07:58:25.815184 run              patchelf(pid=14107): Launched
07:58:25.986841 run   osmo-stp_10.42.42.5(pid=14104): ERR: Terminated: ERROR {rc=1}  [trial-2371↪gprs:nanobts+band-1900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14104)]
07:58:26.113133 run   osmo-stp_10.42.42.5(pid=14104): stdout: 
| (launched: 2022-12-10_07:58:24.694770)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
07:58:26.238872 run   osmo-stp_10.42.42.5(pid=14104): stderr: 
| [0;m[38;5;43m20221210075824863 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221210075824864 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221210075824864 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221210075824864 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210075824865 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210075824865 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210075824865 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
07:58:26.360483 run   osmo-stp_10.42.42.5(pid=14104): stdout: 
| (launched: 2022-12-10_07:58:24.694770)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
07:58:26.480198 run   osmo-stp_10.42.42.5(pid=14104): stderr: 
| [0;m[38;5;43m20221210075824863 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221210075824864 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221210075824864 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221210075824864 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210075824865 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210075824865 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210075824865 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
07:58:26.625423 run              patchelf(pid=14107): Terminating (SIGINT)
07:58:26.803088 run              patchelf(pid=14107): Terminated: ok {rc=0}
07:58:26.835803 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=14104): Process ended prematurely: osmo-stp_10.42.42.5(pid=14104) [trial-2371↪gprs:nanobts+band-1900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14104)]  [trial-2371↪gprs:nanobts+band-1900+mod-bts0-egprs↪iperf3.py:8]
07:58:26.845601 tst                      iperf3.py:8: Test FAILED (7.3 sec)
07:58:26.908504 run   osmo-hlr_10.42.42.2(pid=14101): ERR: Terminated: ERROR {rc=237}  [trial-2371↪gprs:nanobts+band-1900+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=14101)]
07:58:26.960006 run   osmo-hlr_10.42.42.2(pid=14101): stdout: 
| (launched: 2022-12-10_07:58:23.768718) 
07:58:27.012289 run   osmo-hlr_10.42.42.2(pid=14101): stderr: 
| [0;m[1;31m20221210075823941 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221210075823941 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221210075823941 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221210075823941 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221210075823942 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221210075823942 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221210075823954 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2371/run.2022-12-10_06-54-20/gprs:nanobts+band-1900+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221210075823962 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221210075823962 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221210075823962 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
07:58:27.056704 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14096): Terminating (SIGTERM)
07:58:27.098520 run iperf3-srv_10.42.42.10(pid=14097): Terminating (SIGTERM)
07:58:27.139904 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14100): Terminating (SIGTERM)
07:58:27.181215 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14103): Terminating (SIGTERM)
07:58:27.222918 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14106): Terminating (SIGTERM)
07:58:27.232646 ---      ParallelTerminationStrategy: PID 14096 died...
07:58:27.288833 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14096): Terminated: ok {rc=0}
07:58:27.299017 ---      ParallelTerminationStrategy: PID 14097 died...
07:58:27.354286 run iperf3-srv_10.42.42.10(pid=14097): Terminated {rc=256}
07:58:27.364303 ---      ParallelTerminationStrategy: PID 14100 died...
07:58:27.419676 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14100): Terminated: ok {rc=0}
07:58:27.429659 ---      ParallelTerminationStrategy: PID 14103 died...
07:58:27.484453 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14103): Terminated: ok {rc=0}
07:58:27.494419 ---      ParallelTerminationStrategy: PID 14106 died...
07:58:27.549278 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14106): Terminated: ok {rc=0}
07:58:27.636221 bus                          /gobi_6: Setting Powered False
