
----------------------------------------------
trial-2371 gprs:nanobts+band-1900 iperf3m4.py
----------------------------------------------
07:57:30.132601 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
07:57:30.144244 tst           gprs:nanobts+band-1900: Using 1 x bts (candidates: 1)
07:57:30.275368 tst                      iperf3m4.py: using LAC 26963
07:57:30.399371 tst                      iperf3m4.py: using RAC 188
07:57:30.525956 tst                      iperf3m4.py: using CellId 26963
07:57:30.646354 tst                      iperf3m4.py: using BVCI 26964
07:57:30.670285 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
07:57:30.681414 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
07:57:30.692226 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
07:57:30.703370 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
07:57:30.714267 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
07:57:30.725141 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
07:57:30.736117 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
07:57:30.747333 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
07:57:30.758594 tst           gprs:nanobts+band-1900: Using 1 x modem (candidates: 4)
07:57:30.877563 tst           gprs:nanobts+band-1900: Using 1 x modem (candidates: 4)
07:57:31.010772 tst           gprs:nanobts+band-1900: Using 1 x modem (candidates: 4)
07:57:31.158001 tst           gprs:nanobts+band-1900: Using 1 x modem (candidates: 4)
07:57:31.519897 tst                    iperf3m4.py:8: start iperfv3 server 10.42.42.10:5003...
07:57:31.690828 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
07:57:32.036564 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14041): Launched
07:57:32.328286 run iperf3-srv_10.42.42.10(pid=14042): Launched
07:57:32.519677 tst                    iperf3m4.py:8: start iperfv3 server 10.42.42.10:5004...
07:57:32.650050 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
07:57:32.974768 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14043): Launched
07:57:33.242984 run iperf3-srv_10.42.42.10(pid=14044): Launched
07:57:33.433851 tst                    iperf3m4.py:8: start iperfv3 server 10.42.42.10:5005...
07:57:33.564223 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
07:57:33.888593 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14045): Launched
07:57:34.156792 run iperf3-srv_10.42.42.10(pid=14046): Launched
07:57:34.348766 tst                    iperf3m4.py:8: start iperfv3 server 10.42.42.10:5006...
07:57:34.478871 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
07:57:34.802972 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14047): Launched
07:57:35.070935 run iperf3-srv_10.42.42.10(pid=14048): Launched
07:57:35.261999 tst                    iperf3m4.py:8: start network...
07:57:35.392182 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
07:57:35.891806 run         create_hlr_db(pid=14049): Launched
07:57:36.075561 bus                          /gobi_6: Setting Powered False
07:57:37.095626 run         create_hlr_db(pid=14049): Terminated: ok {rc=0}
07:57:37.487926 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14051): Launched
07:57:37.779845 run   osmo-hlr_10.42.42.2(pid=14052): Launched
07:57:37.893195 run              osmo-stp_10.42.42.5: Starting osmo-stp
07:57:38.410802 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14054): Launched
07:57:38.703219 run   osmo-stp_10.42.42.5(pid=14055): Launched
07:57:38.810086 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
07:57:39.319049 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14057): Launched
07:57:39.423494 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
07:57:39.686023 run              patchelf(pid=14058): Launched
07:57:39.872641 run   osmo-stp_10.42.42.5(pid=14055): ERR: Terminated: ERROR {rc=1}  [trial-2371↪gprs:nanobts+band-1900↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14055)]
07:57:40.008377 run   osmo-stp_10.42.42.5(pid=14055): stdout: 
| (launched: 2022-12-10_07:57:38.558915)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
07:57:40.144034 run   osmo-stp_10.42.42.5(pid=14055): stderr: 
| [0;m[38;5;43m20221210075738725 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221210075738725 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221210075738725 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221210075738726 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210075738726 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210075738726 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210075738726 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
07:57:40.275378 run   osmo-stp_10.42.42.5(pid=14055): stdout: 
| (launched: 2022-12-10_07:57:38.558915)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
07:57:40.405257 run   osmo-stp_10.42.42.5(pid=14055): stderr: 
| [0;m[38;5;43m20221210075738725 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221210075738725 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221210075738725 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221210075738726 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210075738726 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210075738726 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210075738726 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
07:57:40.556704 run              patchelf(pid=14058): Terminating (SIGINT)
07:57:40.735068 run              patchelf(pid=14058): Terminated: ok {rc=0}
07:57:40.768212 tst                    iperf3m4.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=14055): Process ended prematurely: osmo-stp_10.42.42.5(pid=14055) [trial-2371↪gprs:nanobts+band-1900↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14055)]  [trial-2371↪gprs:nanobts+band-1900↪iperf3m4.py:8]
07:57:40.778225 tst                    iperf3m4.py:8: Test FAILED (10.7 sec)
07:57:40.842422 run   osmo-hlr_10.42.42.2(pid=14052): ERR: Terminated: ERROR {rc=237}  [trial-2371↪gprs:nanobts+band-1900↪iperf3m4.py↪iperf3m4.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=14052)]
07:57:40.894246 run   osmo-hlr_10.42.42.2(pid=14052): stdout: 
| (launched: 2022-12-10_07:57:37.636020) 
07:57:40.946559 run   osmo-hlr_10.42.42.2(pid=14052): stderr: 
| [0;m[1;31m20221210075737810 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221210075737810 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221210075737810 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221210075737810 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221210075737810 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221210075737810 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221210075737824 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2371/run.2022-12-10_06-54-20/gprs:nanobts+band-1900/iperf3m4.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221210075737834 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221210075737834 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221210075737834 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
07:57:40.990432 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14041): Terminating (SIGTERM)
07:57:41.032468 run iperf3-srv_10.42.42.10(pid=14042): Terminating (SIGTERM)
07:57:41.074700 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14043): Terminating (SIGTERM)
07:57:41.117310 run iperf3-srv_10.42.42.10(pid=14044): Terminating (SIGTERM)
07:57:41.159442 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14045): Terminating (SIGTERM)
07:57:41.201086 run iperf3-srv_10.42.42.10(pid=14046): Terminating (SIGTERM)
07:57:41.243505 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14047): Terminating (SIGTERM)
07:57:41.285674 run iperf3-srv_10.42.42.10(pid=14048): Terminating (SIGTERM)
07:57:41.327302 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14051): Terminating (SIGTERM)
07:57:41.369748 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14054): Terminating (SIGTERM)
07:57:41.411397 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14057): Terminating (SIGTERM)
07:57:41.421709 ---      ParallelTerminationStrategy: PID 14041 died...
07:57:41.477843 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14041): Terminated: ok {rc=0}
07:57:41.488282 ---      ParallelTerminationStrategy: PID 14042 died...
07:57:41.544144 run iperf3-srv_10.42.42.10(pid=14042): Terminated {rc=256}
07:57:41.554741 ---      ParallelTerminationStrategy: PID 14043 died...
07:57:41.610196 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14043): Terminated: ok {rc=0}
07:57:41.620805 ---      ParallelTerminationStrategy: PID 14044 died...
07:57:41.676535 run iperf3-srv_10.42.42.10(pid=14044): Terminated {rc=256}
07:57:41.687174 ---      ParallelTerminationStrategy: PID 14045 died...
07:57:41.742717 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14045): Terminated: ok {rc=0}
07:57:41.753576 ---      ParallelTerminationStrategy: PID 14046 died...
07:57:41.809282 run iperf3-srv_10.42.42.10(pid=14046): Terminated {rc=256}
07:57:41.819905 ---      ParallelTerminationStrategy: PID 14047 died...
07:57:41.876344 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14047): Terminated: ok {rc=0}
07:57:41.886635 ---      ParallelTerminationStrategy: PID 14048 died...
07:57:41.943067 run iperf3-srv_10.42.42.10(pid=14048): Terminated {rc=256}
07:57:41.953339 ---      ParallelTerminationStrategy: PID 14051 died...
07:57:42.009639 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14051): Terminated: ok {rc=0}
07:57:42.019887 ---      ParallelTerminationStrategy: PID 14054 died...
07:57:42.076032 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14054): Terminated: ok {rc=0}
07:57:42.086344 ---      ParallelTerminationStrategy: PID 14057 died...
07:57:42.142112 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14057): Terminated: ok {rc=0}
07:57:42.229676 bus                          /gobi_4: Setting Powered False
07:57:43.336288 bus                          /gobi_4: Setting Powered False
07:57:44.448062 bus                          /gobi_1: Setting Powered False
07:57:45.549955 bus                          /gobi_1: Setting Powered False
07:57:46.658793 bus                          /gobi_0: Setting Powered False
07:57:47.765181 bus                          /gobi_0: Setting Powered False
07:57:48.875440 bus                          /gobi_6: Setting Powered False
