
----------------------------------------------
trial-2371 gprs:nanobts+band-1900 ping.py
----------------------------------------------
07:57:49.942668 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
07:57:49.953902 tst           gprs:nanobts+band-1900: Using 1 x bts (candidates: 1)
07:57:50.076113 tst                          ping.py: using LAC 26964
07:57:50.188272 tst                          ping.py: using RAC 189
07:57:50.309444 tst                          ping.py: using CellId 26964
07:57:50.433436 tst                          ping.py: using BVCI 26965
07:57:50.456708 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
07:57:50.467692 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
07:57:50.478678 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
07:57:50.489497 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
07:57:50.500235 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
07:57:50.510996 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
07:57:50.521934 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
07:57:50.532926 tst           gprs:nanobts+band-1900: Using 1 x modem (candidates: 4)
07:57:50.813325 tst                       ping.py:19: start network...
07:57:50.940866 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
07:57:51.430590 run         create_hlr_db(pid=14059): Launched
07:57:51.607807 bus                          /gobi_6: Setting Powered False
07:57:52.629418 run         create_hlr_db(pid=14059): Terminated: ok {rc=0}
07:57:53.014802 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14061): Launched
07:57:53.302287 run   osmo-hlr_10.42.42.2(pid=14062): Launched
07:57:53.407617 run              osmo-stp_10.42.42.5: Starting osmo-stp
07:57:53.906460 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14064): Launched
07:57:54.192374 run   osmo-stp_10.42.42.5(pid=14065): Launched
07:57:54.296460 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
07:57:54.794694 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14067): Launched
07:57:54.896561 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
07:57:55.145848 run              patchelf(pid=14068): Launched
07:57:55.313141 run   osmo-stp_10.42.42.5(pid=14065): ERR: Terminated: ERROR {rc=1}  [trial-2371↪gprs:nanobts+band-1900↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14065)]
07:57:55.435962 run   osmo-stp_10.42.42.5(pid=14065): stdout: 
| (launched: 2022-12-10_07:57:54.050890)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
07:57:55.559071 run   osmo-stp_10.42.42.5(pid=14065): stderr: 
| [0;m[38;5;43m20221210075754219 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221210075754219 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221210075754219 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221210075754219 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210075754222 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210075754222 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210075754222 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
07:57:55.677820 run   osmo-stp_10.42.42.5(pid=14065): stdout: 
| (launched: 2022-12-10_07:57:54.050890)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
07:57:55.795354 run   osmo-stp_10.42.42.5(pid=14065): stderr: 
| [0;m[38;5;43m20221210075754219 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221210075754219 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221210075754219 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221210075754219 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210075754222 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210075754222 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210075754222 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
07:57:55.933359 run              patchelf(pid=14068): Terminating (SIGINT)
07:57:56.095851 run              patchelf(pid=14068): Terminated: ok {rc=0}
07:57:56.125721 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=14065): Process ended prematurely: osmo-stp_10.42.42.5(pid=14065) [trial-2371↪gprs:nanobts+band-1900↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14065)]  [trial-2371↪gprs:nanobts+band-1900↪ping.py:22]
07:57:56.134058 tst                       ping.py:22: Test FAILED (6.2 sec)
07:57:56.193840 run   osmo-hlr_10.42.42.2(pid=14062): ERR: Terminated: ERROR {rc=237}  [trial-2371↪gprs:nanobts+band-1900↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=14062)]
07:57:56.242435 run   osmo-hlr_10.42.42.2(pid=14062): stdout: 
| (launched: 2022-12-10_07:57:53.159976) 
07:57:56.291779 run   osmo-hlr_10.42.42.2(pid=14062): stderr: 
| [0;m[1;31m20221210075753332 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221210075753333 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221210075753333 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221210075753333 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221210075753333 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221210075753333 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221210075753346 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2371/run.2022-12-10_06-54-20/gprs:nanobts+band-1900/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221210075753354 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221210075753354 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221210075753354 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
07:57:56.333600 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14061): Terminating (SIGTERM)
07:57:56.373548 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14064): Terminating (SIGTERM)
07:57:56.413469 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14067): Terminating (SIGTERM)
07:57:56.422852 ---      ParallelTerminationStrategy: PID 14061 died...
07:57:56.475997 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14061): Terminated: ok {rc=0}
07:57:56.485649 ---      ParallelTerminationStrategy: PID 14064 died...
07:57:56.538480 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14064): Terminated: ok {rc=0}
07:57:56.548234 ---      ParallelTerminationStrategy: PID 14067 died...
07:57:56.601713 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14067): Terminated: ok {rc=0}
07:57:56.689242 bus                          /gobi_6: Setting Powered False
