
----------------------------------------------
trial-2371 gprs:sysmo+mod-bts0-dynts-osmo iperf3.py
----------------------------------------------
07:03:27.036000 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
07:03:27.048320 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1)
07:03:27.202935 tst                        iperf3.py: using LAC 26671
07:03:27.326807 tst                        iperf3.py: using RAC 151
07:03:27.451695 tst                        iperf3.py: using CellId 26671
07:03:27.582957 tst                        iperf3.py: using BVCI 26672
07:03:27.608859 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
07:03:27.620457 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
07:03:27.631974 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
07:03:27.643676 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
07:03:27.655176 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
07:03:27.666915 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
07:03:27.678680 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
07:03:27.690032 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
07:03:27.701558 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4)
07:03:27.988756 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
07:03:28.119521 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
07:03:28.446095 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8571): Launched
07:03:28.716579 run iperf3-srv_10.42.42.10(pid=8572): Launched
07:03:28.908150 tst                      iperf3.py:8: start network...
07:03:29.038427 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
07:03:29.530449 run          create_hlr_db(pid=8573): Launched
07:03:29.709772 bus                          /gobi_6: Setting Powered False
07:03:30.731708 run          create_hlr_db(pid=8573): Terminated: ok {rc=0}
07:03:31.196558 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8575): Launched
07:03:31.615597 run    osmo-hlr_10.42.42.2(pid=8576): Launched
07:03:31.815357 run              osmo-stp_10.42.42.5: Starting osmo-stp
07:03:32.441191 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8578): Launched
07:03:32.757148 run    osmo-stp_10.42.42.5(pid=8579): Launched
07:03:32.871353 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
07:03:33.414779 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8581): Launched
07:03:33.525907 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
07:03:33.799520 run               patchelf(pid=8582): Launched
07:03:33.981594 run    osmo-stp_10.42.42.5(pid=8579): ERR: Terminated: ERROR {rc=1}  [trial-2371↪gprs:sysmo+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8579)]
07:03:34.114658 run    osmo-stp_10.42.42.5(pid=8579): stdout: 
| (launched: 2022-12-10_07:03:32.599983)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
07:03:34.248496 run    osmo-stp_10.42.42.5(pid=8579): stderr: 
| [0;m[38;5;43m20221210070332774 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221210070332774 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221210070332774 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221210070332774 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210070332775 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210070332775 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210070332775 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
07:03:34.377143 run    osmo-stp_10.42.42.5(pid=8579): stdout: 
| (launched: 2022-12-10_07:03:32.599983)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
07:03:34.504643 run    osmo-stp_10.42.42.5(pid=8579): stderr: 
| [0;m[38;5;43m20221210070332774 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221210070332774 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221210070332774 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221210070332774 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210070332775 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210070332775 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210070332775 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
07:03:34.653893 run               patchelf(pid=8582): Terminating (SIGINT)
07:03:34.829891 run               patchelf(pid=8582): Terminated: ok {rc=0}
07:03:34.862091 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=8579): Process ended prematurely: osmo-stp_10.42.42.5(pid=8579) [trial-2371↪gprs:sysmo+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8579)]  [trial-2371↪gprs:sysmo+mod-bts0-dynts-osmo↪iperf3.py:8]
07:03:34.871358 tst                      iperf3.py:8: Test FAILED (7.9 sec)
07:03:34.932702 run    osmo-hlr_10.42.42.2(pid=8576): ERR: Terminated: ERROR {rc=237}  [trial-2371↪gprs:sysmo+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8576)]
07:03:34.982564 run    osmo-hlr_10.42.42.2(pid=8576): stdout: 
| (launched: 2022-12-10_07:03:31.358290) 
07:03:35.033082 run    osmo-hlr_10.42.42.2(pid=8576): stderr: 
| [0;m[1;31m20221210070331710 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221210070331710 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221210070331710 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221210070331710 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221210070331710 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221210070331710 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221210070331731 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2371/run.2022-12-10_06-54-20/gprs:sysmo+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221210070331750 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221210070331750 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221210070331750 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
07:03:35.075662 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8571): Terminating (SIGTERM)
07:03:35.116111 run iperf3-srv_10.42.42.10(pid=8572): Terminating (SIGTERM)
07:03:35.156514 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8575): Terminating (SIGTERM)
07:03:35.196795 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8578): Terminating (SIGTERM)
07:03:35.237579 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8581): Terminating (SIGTERM)
07:03:35.247150 ---      ParallelTerminationStrategy: PID 8571 died...
07:03:35.301426 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8571): Terminated: ok {rc=0}
07:03:35.311199 ---      ParallelTerminationStrategy: PID 8572 died...
07:03:35.365199 run iperf3-srv_10.42.42.10(pid=8572): Terminated {rc=256}
07:03:35.374831 ---      ParallelTerminationStrategy: PID 8575 died...
07:03:35.428795 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8575): Terminated: ok {rc=0}
07:03:35.438769 ---      ParallelTerminationStrategy: PID 8578 died...
07:03:35.493203 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8578): Terminated: ok {rc=0}
07:03:35.502914 ---      ParallelTerminationStrategy: PID 8581 died...
07:03:35.557390 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8581): Terminated: ok {rc=0}
07:03:35.647203 bus                          /gobi_6: Setting Powered False
