
----------------------------------------------
trial-2373 gprs:nanobts+band-900+mod-bts0-egprs ping_idle_ping.py
----------------------------------------------
10:59:28.235741 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
10:59:28.247472 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x bts (candidates: 1)
10:59:28.385142 tst                ping_idle_ping.py: using LAC 27925
10:59:28.502406 tst                ping_idle_ping.py: using RAC 130
10:59:28.618873 tst                ping_idle_ping.py: using CellId 27925
10:59:28.737566 tst                ping_idle_ping.py: using BVCI 27926
10:59:28.760087 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
10:59:28.771184 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
10:59:28.782005 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
10:59:28.792932 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
10:59:28.803844 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
10:59:28.815204 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
10:59:28.826586 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
10:59:28.837719 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x modem (candidates: 4)
10:59:29.111232 tst             ping_idle_ping.py:24: start network...
10:59:29.235542 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
10:59:29.713736 run         create_hlr_db(pid=31720): Launched
10:59:29.885664 bus                          /gobi_6: Setting Powered False
10:59:30.930757 run         create_hlr_db(pid=31720): Terminated: ok {rc=0}
10:59:31.352411 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31722): Launched
10:59:31.699928 run   osmo-hlr_10.42.42.2(pid=31723): Launched
10:59:31.827947 run              osmo-stp_10.42.42.5: Starting osmo-stp
10:59:32.498136 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31725): Launched
10:59:32.794870 run   osmo-stp_10.42.42.5(pid=31726): Launched
10:59:32.903636 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
10:59:33.421032 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31728): Launched
10:59:33.526466 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
10:59:33.785073 run              patchelf(pid=31729): Launched
10:59:33.958084 run   osmo-stp_10.42.42.5(pid=31726): ERR: Terminated: ERROR {rc=1}  [trial-2373↪gprs:nanobts+band-900+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31726)]
10:59:34.085081 run   osmo-stp_10.42.42.5(pid=31726): stdout: 
| (launched: 2022-12-10_10:59:32.649204)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
10:59:34.212444 run   osmo-stp_10.42.42.5(pid=31726): stderr: 
| [0;m[38;5;43m20221210105932818 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221210105932819 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221210105932819 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221210105932819 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210105932820 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210105932820 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210105932820 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
10:59:34.335002 run   osmo-stp_10.42.42.5(pid=31726): stdout: 
| (launched: 2022-12-10_10:59:32.649204)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
10:59:34.456155 run   osmo-stp_10.42.42.5(pid=31726): stderr: 
| [0;m[38;5;43m20221210105932818 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221210105932819 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221210105932819 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221210105932819 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210105932820 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210105932820 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210105932820 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
10:59:34.598257 run              patchelf(pid=31729): Terminating (SIGINT)
10:59:34.765674 run              patchelf(pid=31729): Terminated: ok {rc=0}
10:59:34.796025 tst             ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=31726): Process ended prematurely: osmo-stp_10.42.42.5(pid=31726) [trial-2373↪gprs:nanobts+band-900+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31726)]  [trial-2373↪gprs:nanobts+band-900+mod-bts0-egprs↪ping_idle_ping.py:27]
10:59:34.804499 tst             ping_idle_ping.py:27: Test FAILED (6.6 sec)
10:59:34.865184 run   osmo-hlr_10.42.42.2(pid=31723): ERR: Terminated: ERROR {rc=237}  [trial-2373↪gprs:nanobts+band-900+mod-bts0-egprs↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=31723)]
10:59:34.914133 run   osmo-hlr_10.42.42.2(pid=31723): stdout: 
| (launched: 2022-12-10_10:59:31.506913) 
10:59:34.963097 run   osmo-hlr_10.42.42.2(pid=31723): stderr: 
| [0;m[1;31m20221210105931882 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221210105931882 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221210105931882 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221210105931882 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221210105931882 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221210105931882 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221210105931900 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2373/run.2022-12-10_09-48-07/gprs:nanobts+band-900+mod-bts0-egprs/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221210105931926 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221210105931926 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221210105931926 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
10:59:35.005136 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31722): Terminating (SIGTERM)
10:59:35.044701 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31725): Terminating (SIGTERM)
10:59:35.084356 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31728): Terminating (SIGTERM)
10:59:35.093755 ---      ParallelTerminationStrategy: PID 31722 died...
10:59:35.147273 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31722): Terminated: ok {rc=0}
10:59:35.157153 ---      ParallelTerminationStrategy: PID 31725 died...
10:59:35.210093 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31725): Terminated: ok {rc=0}
10:59:35.219838 ---      ParallelTerminationStrategy: PID 31728 died...
10:59:35.273169 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31728): Terminated: ok {rc=0}
10:59:35.360288 bus                          /gobi_6: Setting Powered False
