
----------------------------------------------
trial-2373 gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend ping_idle_ping.py
----------------------------------------------
10:32:25.362236 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
10:32:25.374629 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1)
10:32:25.523992 tst                ping_idle_ping.py: using LAC 27780
10:32:25.646696 tst                ping_idle_ping.py: using RAC 240
10:32:25.768773 tst                ping_idle_ping.py: using CellId 27780
10:32:25.887462 tst                ping_idle_ping.py: using BVCI 27781
10:32:25.910164 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
10:32:25.921697 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
10:32:25.933423 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
10:32:25.945421 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
10:32:25.958365 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
10:32:25.970040 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
10:32:25.981721 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
10:32:25.993368 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
10:32:26.267842 tst             ping_idle_ping.py:24: start network...
10:32:26.392018 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
10:32:26.870762 run         create_hlr_db(pid=29282): Launched
10:32:27.043499 bus                          /gobi_6: Setting Powered False
10:32:28.065452 run         create_hlr_db(pid=29282): Terminated: ok {rc=0}
10:32:28.487733 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29284): Launched
10:32:28.801494 run   osmo-hlr_10.42.42.2(pid=29285): Launched
10:32:28.911901 run              osmo-stp_10.42.42.5: Starting osmo-stp
10:32:29.433346 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29287): Launched
10:32:29.730946 run   osmo-stp_10.42.42.5(pid=29288): Launched
10:32:29.837888 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
10:32:30.357273 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29290): Launched
10:32:30.463196 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
10:32:30.722679 run              patchelf(pid=29291): Launched
10:32:30.931374 run   osmo-stp_10.42.42.5(pid=29288): ERR: Terminated: ERROR {rc=1}  [trial-2373↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29288)]
10:32:31.071976 run   osmo-stp_10.42.42.5(pid=29288): stdout: 
| (launched: 2022-12-10_10:32:29.584066)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
10:32:31.213821 run   osmo-stp_10.42.42.5(pid=29288): stderr: 
| [0;m[38;5;43m20221210103229754 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221210103229755 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221210103229755 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221210103229755 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210103229756 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210103229756 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210103229756 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
10:32:31.350351 run   osmo-stp_10.42.42.5(pid=29288): stdout: 
| (launched: 2022-12-10_10:32:29.584066)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
10:32:31.484719 run   osmo-stp_10.42.42.5(pid=29288): stderr: 
| [0;m[38;5;43m20221210103229754 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221210103229755 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221210103229755 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221210103229755 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210103229756 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210103229756 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210103229756 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
10:32:31.642586 run              patchelf(pid=29291): Terminating (SIGINT)
10:32:31.827628 run              patchelf(pid=29291): Terminated: ok {rc=0}
10:32:31.861726 tst             ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=29288): Process ended prematurely: osmo-stp_10.42.42.5(pid=29288) [trial-2373↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29288)]  [trial-2373↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping_idle_ping.py:27]
10:32:31.872102 tst             ping_idle_ping.py:27: Test FAILED (6.5 sec)
10:32:31.940669 run   osmo-hlr_10.42.42.2(pid=29285): ERR: Terminated: ERROR {rc=237}  [trial-2373↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=29285)]
10:32:31.995758 run   osmo-hlr_10.42.42.2(pid=29285): stdout: 
| (launched: 2022-12-10_10:32:28.648840) 
10:32:32.050980 run   osmo-hlr_10.42.42.2(pid=29285): stderr: 
| [0;m[1;31m20221210103228823 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221210103228823 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221210103228823 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221210103228823 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221210103228823 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221210103228823 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221210103228835 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2373/run.2022-12-10_09-48-07/gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221210103228843 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221210103228843 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221210103228843 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
10:32:32.098029 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29284): Terminating (SIGTERM)
10:32:32.142973 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29287): Terminating (SIGTERM)
10:32:32.187843 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29290): Terminating (SIGTERM)
10:32:32.197588 ---      ParallelTerminationStrategy: PID 29284 died...
10:32:32.253690 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29284): Terminated: ok {rc=0}
10:32:32.263984 ---      ParallelTerminationStrategy: PID 29287 died...
10:32:32.320128 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29287): Terminated: ok {rc=0}
10:32:32.330276 ---      ParallelTerminationStrategy: PID 29290 died...
10:32:32.388025 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29290): Terminated: ok {rc=0}
10:32:32.474381 bus                          /gobi_6: Setting Powered False
