
----------------------------------------------
trial-2374 gprs:nanobts+band-1900 ping_idle_ping.py
----------------------------------------------
12:19:13.595555 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
12:19:13.606637 tst           gprs:nanobts+band-1900: Using 1 x bts (candidates: 1)
12:19:13.728292 tst                ping_idle_ping.py: using LAC 28348
12:19:13.842880 tst                ping_idle_ping.py: using RAC 43
12:19:13.966717 tst                ping_idle_ping.py: using CellId 28348
12:19:14.088287 tst                ping_idle_ping.py: using BVCI 28349
12:19:14.112195 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
12:19:14.123173 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
12:19:14.134162 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
12:19:14.145989 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
12:19:14.158465 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
12:19:14.170097 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
12:19:14.181979 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
12:19:14.192838 tst           gprs:nanobts+band-1900: Using 1 x modem (candidates: 4)
12:19:14.462583 tst             ping_idle_ping.py:24: start network...
12:19:14.583845 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
12:19:15.056045 run          create_hlr_db(pid=7158): Launched
12:19:15.239167 bus                          /gobi_6: Setting Powered False
12:19:16.261764 run          create_hlr_db(pid=7158): Terminated: ok {rc=0}
12:19:16.706175 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7160): Launched
12:19:17.054392 run    osmo-hlr_10.42.42.2(pid=7161): Launched
12:19:17.236482 run              osmo-stp_10.42.42.5: Starting osmo-stp
12:19:17.767419 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7163): Launched
12:19:18.059694 run    osmo-stp_10.42.42.5(pid=7164): Launched
12:19:18.165162 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
12:19:18.675494 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7166): Launched
12:19:18.778979 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
12:19:19.034883 run               patchelf(pid=7167): Launched
12:19:19.206261 run    osmo-stp_10.42.42.5(pid=7164): ERR: Terminated: ERROR {rc=1}  [trial-2374↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7164)]
12:19:19.331391 run    osmo-stp_10.42.42.5(pid=7164): stdout: 
| (launched: 2022-12-10_12:19:17.916174)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
12:19:19.456651 run    osmo-stp_10.42.42.5(pid=7164): stderr: 
| [0;m[38;5;43m20221210121918084 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221210121918084 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221210121918085 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221210121918085 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210121918087 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210121918087 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210121918087 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
12:19:19.578318 run    osmo-stp_10.42.42.5(pid=7164): stdout: 
| (launched: 2022-12-10_12:19:17.916174)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
12:19:19.698373 run    osmo-stp_10.42.42.5(pid=7164): stderr: 
| [0;m[38;5;43m20221210121918084 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221210121918084 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221210121918085 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221210121918085 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210121918087 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210121918087 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210121918087 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
12:19:19.838643 run               patchelf(pid=7167): Terminating (SIGINT)
12:19:20.002857 run               patchelf(pid=7167): Terminated: ok {rc=0}
12:19:20.032672 tst             ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=7164): Process ended prematurely: osmo-stp_10.42.42.5(pid=7164) [trial-2374↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7164)]  [trial-2374↪gprs:nanobts+band-1900↪ping_idle_ping.py:27]
12:19:20.041233 tst             ping_idle_ping.py:27: Test FAILED (6.4 sec)
12:19:20.100168 run    osmo-hlr_10.42.42.2(pid=7161): ERR: Terminated: ERROR {rc=237}  [trial-2374↪gprs:nanobts+band-1900↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=7161)]
12:19:20.148335 run    osmo-hlr_10.42.42.2(pid=7161): stdout: 
| (launched: 2022-12-10_12:19:16.870063) 
12:19:20.196750 run    osmo-hlr_10.42.42.2(pid=7161): stderr: 
| [0;m[1;31m20221210121917205 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221210121917205 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221210121917205 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221210121917206 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221210121917206 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221210121917206 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221210121917228 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2374/run.2022-12-10_11-15-10/gprs:nanobts+band-1900/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221210121917236 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221210121917236 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221210121917236 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
12:19:20.238216 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7160): Terminating (SIGTERM)
12:19:20.277314 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7163): Terminating (SIGTERM)
12:19:20.316381 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7166): Terminating (SIGTERM)
12:19:20.325539 ---      ParallelTerminationStrategy: PID 7160 died...
12:19:20.377886 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7160): Terminated: ok {rc=0}
12:19:20.387375 ---      ParallelTerminationStrategy: PID 7163 died...
12:19:20.439494 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7163): Terminated: ok {rc=0}
12:19:20.449090 ---      ParallelTerminationStrategy: PID 7166 died...
12:19:20.501558 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7166): Terminated: ok {rc=0}
12:19:20.589079 bus                          /gobi_6: Setting Powered False
