
----------------------------------------------
trial-2374 gprs:trx-sysmocell5000+mod-bts0-dynts-ipa iperf3.py
----------------------------------------------
11:48:34.506259 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
11:48:34.518325 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1)
11:48:34.686377 tst                        iperf3.py: using LAC 28184
11:48:34.811063 tst                        iperf3.py: using RAC 134
11:48:34.941084 tst                        iperf3.py: using CellId 28184
11:48:35.065123 tst                        iperf3.py: using BVCI 28185
11:48:35.089587 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
11:48:35.100842 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
11:48:35.112061 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
11:48:35.123259 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
11:48:35.134402 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
11:48:35.145468 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
11:48:35.156742 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
11:48:35.167821 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
11:48:35.179056 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4)
11:48:35.469208 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
11:48:35.603242 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
11:48:35.935197 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3893): Launched
11:48:36.210574 run iperf3-srv_10.42.42.10(pid=3894): Launched
11:48:36.407967 tst                      iperf3.py:8: start network...
11:48:36.542380 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
11:48:37.054252 run          create_hlr_db(pid=3895): Launched
11:48:37.240421 bus                          /gobi_6: Setting Powered False
11:48:38.261285 run          create_hlr_db(pid=3895): Terminated: ok {rc=0}
11:48:38.686970 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3897): Launched
11:48:39.006953 run    osmo-hlr_10.42.42.2(pid=3898): Launched
11:48:39.126024 run              osmo-stp_10.42.42.5: Starting osmo-stp
11:48:39.685523 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3900): Launched
11:48:40.007104 run    osmo-stp_10.42.42.5(pid=3901): Launched
11:48:40.123177 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
11:48:40.683348 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3903): Launched
11:48:40.797584 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
11:48:41.077712 run               patchelf(pid=3904): Launched
11:48:41.265652 run    osmo-stp_10.42.42.5(pid=3901): ERR: Terminated: ERROR {rc=1}  [trial-2374↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3901)]
11:48:41.403432 run    osmo-stp_10.42.42.5(pid=3901): stdout: 
| (launched: 2022-12-10_11:48:39.848871)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
11:48:41.541171 run    osmo-stp_10.42.42.5(pid=3901): stderr: 
| [0;m[38;5;43m20221210114840040 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221210114840040 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221210114840040 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221210114840041 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210114840041 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210114840041 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210114840041 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
11:48:41.674772 run    osmo-stp_10.42.42.5(pid=3901): stdout: 
| (launched: 2022-12-10_11:48:39.848871)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
11:48:41.806361 run    osmo-stp_10.42.42.5(pid=3901): stderr: 
| [0;m[38;5;43m20221210114840040 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221210114840040 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221210114840040 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221210114840041 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210114840041 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210114840041 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210114840041 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
11:48:41.959690 run               patchelf(pid=3904): Terminating (SIGINT)
11:48:42.139587 run               patchelf(pid=3904): Terminated: ok {rc=0}
11:48:42.172582 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=3901): Process ended prematurely: osmo-stp_10.42.42.5(pid=3901) [trial-2374↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3901)]  [trial-2374↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py:8]
11:48:42.182459 tst                      iperf3.py:8: Test FAILED (7.7 sec)
11:48:42.245265 run    osmo-hlr_10.42.42.2(pid=3898): ERR: Terminated: ERROR {rc=237}  [trial-2374↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=3898)]
11:48:42.297074 run    osmo-hlr_10.42.42.2(pid=3898): stdout: 
| (launched: 2022-12-10_11:48:38.850597) 
11:48:42.349257 run    osmo-hlr_10.42.42.2(pid=3898): stderr: 
| [0;m[1;31m20221210114839048 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221210114839048 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221210114839048 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221210114839048 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221210114839048 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221210114839048 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221210114839061 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2374/run.2022-12-10_11-15-10/gprs:trx-sysmocell5000+mod-bts0-dynts-ipa/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221210114839070 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221210114839070 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221210114839070 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
11:48:42.393752 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3893): Terminating (SIGTERM)
11:48:42.435304 run iperf3-srv_10.42.42.10(pid=3894): Terminating (SIGTERM)
11:48:42.476716 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3897): Terminating (SIGTERM)
11:48:42.518124 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3900): Terminating (SIGTERM)
11:48:42.559612 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3903): Terminating (SIGTERM)
11:48:42.569261 ---      ParallelTerminationStrategy: PID 3893 died...
11:48:42.624859 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3893): Terminated: ok {rc=0}
11:48:42.634812 ---      ParallelTerminationStrategy: PID 3894 died...
11:48:42.690308 run iperf3-srv_10.42.42.10(pid=3894): Terminated {rc=256}
11:48:42.700117 ---      ParallelTerminationStrategy: PID 3897 died...
11:48:42.755267 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3897): Terminated: ok {rc=0}
11:48:42.765261 ---      ParallelTerminationStrategy: PID 3900 died...
11:48:42.820294 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3900): Terminated: ok {rc=0}
11:48:42.830306 ---      ParallelTerminationStrategy: PID 3903 died...
11:48:42.885778 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3903): Terminated: ok {rc=0}
11:48:42.973992 bus                          /gobi_6: Setting Powered False
