
----------------------------------------------
trial-2379 gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py
----------------------------------------------
16:50:09.144331 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
16:50:09.156009 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1)
16:50:09.304058 tst         cs_paging_gprs_active.py: using LAC 30195
16:50:09.430667 tst         cs_paging_gprs_active.py: using RAC 105
16:50:09.548628 tst         cs_paging_gprs_active.py: using CellId 30195
16:50:09.667729 tst         cs_paging_gprs_active.py: using BVCI 30196
16:50:09.691114 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
16:50:09.702471 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
16:50:09.713729 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
16:50:09.725013 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
16:50:09.735969 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
16:50:09.747193 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
16:50:09.758434 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
16:50:09.769572 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
16:50:09.781004 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
16:50:09.900553 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
16:50:10.196312 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003...
16:50:10.332492 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
16:50:10.671613 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30057): Launched
16:50:10.951575 run iperf3-srv_10.42.42.10(pid=30058): Launched
16:50:11.151393 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004...
16:50:11.287162 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
16:50:11.623905 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30059): Launched
16:50:11.904122 run iperf3-srv_10.42.42.10(pid=30060): Launched
16:50:12.104052 tst      cs_paging_gprs_active.py:38: start network...
16:50:12.239646 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
16:50:12.754769 run         create_hlr_db(pid=30061): Launched
16:50:12.942853 bus                          /gobi_6: Setting Powered False
16:50:13.964884 run         create_hlr_db(pid=30061): Terminated: ok {rc=0}
16:50:14.382191 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30063): Launched
16:50:14.710132 run   osmo-hlr_10.42.42.2(pid=30064): Launched
16:50:14.828858 run              osmo-stp_10.42.42.5: Starting osmo-stp
16:50:15.396089 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30066): Launched
16:50:15.724336 run   osmo-stp_10.42.42.5(pid=30067): Launched
16:50:15.909092 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
16:50:16.560388 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30069): Launched
16:50:16.680184 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
16:50:16.980903 run              patchelf(pid=30070): Launched
16:50:17.176031 run   osmo-stp_10.42.42.5(pid=30067): ERR: Terminated: ERROR {rc=1}  [trial-2379↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30067)]
16:50:17.315191 run   osmo-stp_10.42.42.5(pid=30067): stdout: 
| (launched: 2022-12-12_16:50:15.561590)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
16:50:17.454971 run   osmo-stp_10.42.42.5(pid=30067): stderr: 
| [0;m[38;5;43m20221212165015752 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221212165015752 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221212165015752 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221212165015753 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212165015753 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212165015753 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212165015753 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
16:50:17.589912 run   osmo-stp_10.42.42.5(pid=30067): stdout: 
| (launched: 2022-12-12_16:50:15.561590)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
16:50:17.723297 run   osmo-stp_10.42.42.5(pid=30067): stderr: 
| [0;m[38;5;43m20221212165015752 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221212165015752 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221212165015752 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221212165015753 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212165015753 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212165015753 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212165015753 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
16:50:17.878011 run              patchelf(pid=30070): Terminating (SIGINT)
16:50:18.059716 run              patchelf(pid=30070): Terminated: ok {rc=0}
16:50:18.093486 tst      cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=30067): Process ended prematurely: osmo-stp_10.42.42.5(pid=30067) [trial-2379↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30067)]  [trial-2379↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38]
16:50:18.103616 tst      cs_paging_gprs_active.py:38: Test FAILED (9.0 sec)
16:50:18.167681 run   osmo-hlr_10.42.42.2(pid=30064): ERR: Terminated: ERROR {rc=237}  [trial-2379↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=30064)]
16:50:18.219587 run   osmo-hlr_10.42.42.2(pid=30064): stdout: 
| (launched: 2022-12-12_16:50:14.548063) 
16:50:18.272617 run   osmo-hlr_10.42.42.2(pid=30064): stderr: 
| [0;m[1;31m20221212165014743 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221212165014744 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221212165014744 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221212165014744 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221212165014744 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221212165014744 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221212165014756 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2379/run.2022-12-12_16-06-15/gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221212165014764 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221212165014765 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221212165014765 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
16:50:18.317479 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30057): Terminating (SIGTERM)
16:50:18.359917 run iperf3-srv_10.42.42.10(pid=30058): Terminating (SIGTERM)
16:50:18.402390 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30059): Terminating (SIGTERM)
16:50:18.444699 run iperf3-srv_10.42.42.10(pid=30060): Terminating (SIGTERM)
16:50:18.487113 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30063): Terminating (SIGTERM)
16:50:18.529638 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30066): Terminating (SIGTERM)
16:50:18.571954 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30069): Terminating (SIGTERM)
16:50:18.581711 ---      ParallelTerminationStrategy: PID 30057 died...
16:50:18.637908 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30057): Terminated: ok {rc=0}
16:50:18.648263 ---      ParallelTerminationStrategy: PID 30058 died...
16:50:18.704580 run iperf3-srv_10.42.42.10(pid=30058): Terminated {rc=256}
16:50:18.714882 ---      ParallelTerminationStrategy: PID 30059 died...
16:50:18.770688 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30059): Terminated: ok {rc=0}
16:50:18.780879 ---      ParallelTerminationStrategy: PID 30060 died...
16:50:18.837124 run iperf3-srv_10.42.42.10(pid=30060): Terminated {rc=256}
16:50:18.847116 ---      ParallelTerminationStrategy: PID 30063 died...
16:50:18.904029 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30063): Terminated: ok {rc=0}
16:50:18.914257 ---      ParallelTerminationStrategy: PID 30066 died...
16:50:18.970611 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30066): Terminated: ok {rc=0}
16:50:18.980778 ---      ParallelTerminationStrategy: PID 30069 died...
16:50:19.037761 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30069): Terminated: ok {rc=0}
16:50:19.125401 bus                          /gobi_0: Setting Powered False
16:50:20.233006 bus                          /gobi_0: Setting Powered False
16:50:21.341064 bus                          /gobi_6: Setting Powered False
