
----------------------------------------------
trial-2380 dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo switch_tch_pdch.py
----------------------------------------------
18:42:10.015543 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
18:42:10.026700 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x bts (candidates: 1)
18:42:10.177864 tst               switch_tch_pdch.py: using LAC 30746
18:42:10.297733 tst               switch_tch_pdch.py: using RAC 146
18:42:10.416366 tst               switch_tch_pdch.py: using CellId 30746
18:42:10.538406 tst               switch_tch_pdch.py: using BVCI 30747
18:42:10.562868 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
18:42:10.574974 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
18:42:10.587187 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
18:42:10.598937 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
18:42:10.610508 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
18:42:10.621948 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
18:42:10.633962 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
18:42:10.645560 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2)
18:42:10.764581 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2)
18:42:11.041185 tst            switch_tch_pdch.py:51: start network...
18:42:11.165488 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
18:42:11.614737 run         create_hlr_db(pid=14241): Launched
18:42:11.736369 bus                          /gobi_6: Setting Powered False
18:42:12.807902 run         create_hlr_db(pid=14241): Terminated: ok {rc=0}
18:42:13.206861 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14243): Launched
18:42:13.528260 run   osmo-hlr_10.42.42.2(pid=14244): Launched
18:42:13.646907 run              osmo-stp_10.42.42.5: Starting osmo-stp
18:42:14.178334 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14246): Launched
18:42:14.499713 run   osmo-stp_10.42.42.5(pid=14247): Launched
18:42:14.615549 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
18:42:15.147243 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14249): Launched
18:42:15.260899 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
18:42:15.541204 run              patchelf(pid=14250): Launched
18:42:15.727439 run   osmo-stp_10.42.42.5(pid=14247): ERR: Terminated: ERROR {rc=1}  [trial-2380↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14247)]
18:42:15.880425 run   osmo-stp_10.42.42.5(pid=14247): stdout: 
| (launched: 2022-12-12_18:42:14.340901)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
18:42:16.039992 run   osmo-stp_10.42.42.5(pid=14247): stderr: 
| [0;m[38;5;43m20221212184214532 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221212184214533 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221212184214533 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221212184214533 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212184214534 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212184214534 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212184214534 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
18:42:16.174511 run   osmo-stp_10.42.42.5(pid=14247): stdout: 
| (launched: 2022-12-12_18:42:14.340901)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
18:42:16.308231 run   osmo-stp_10.42.42.5(pid=14247): stderr: 
| [0;m[38;5;43m20221212184214532 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221212184214533 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221212184214533 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221212184214533 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212184214534 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212184214534 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212184214534 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
18:42:16.464452 run              patchelf(pid=14250): Terminating (SIGINT)
18:42:16.646349 run              patchelf(pid=14250): Terminated: ok {rc=0}
18:42:16.680063 tst            switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=14247): Process ended prematurely: osmo-stp_10.42.42.5(pid=14247) [trial-2380↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14247)]  [trial-2380↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54]
18:42:16.690174 tst            switch_tch_pdch.py:54: Test FAILED (6.7 sec)
18:42:16.754042 run   osmo-hlr_10.42.42.2(pid=14244): ERR: Terminated: ERROR {rc=237}  [trial-2380↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=14244)]
18:42:16.806258 run   osmo-hlr_10.42.42.2(pid=14244): stdout: 
| (launched: 2022-12-12_18:42:13.369882) 
18:42:16.859266 run   osmo-hlr_10.42.42.2(pid=14244): stderr: 
| [0;m[1;31m20221212184213565 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221212184213565 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221212184213565 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221212184213565 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221212184213565 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221212184213565 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221212184213579 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2380/run.2022-12-12_17-41-28/dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221212184213588 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221212184213588 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221212184213588 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
18:42:16.905055 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14243): Terminating (SIGTERM)
18:42:16.948536 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14246): Terminating (SIGTERM)
18:42:16.994849 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14249): Terminating (SIGTERM)
18:42:17.005887 ---      ParallelTerminationStrategy: PID 14243 died...
18:42:17.064826 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14243): Terminated: ok {rc=0}
18:42:17.075356 ---      ParallelTerminationStrategy: PID 14246 died...
18:42:17.132780 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14246): Terminated: ok {rc=0}
18:42:17.143332 ---      ParallelTerminationStrategy: PID 14249 died...
18:42:17.200470 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14249): Terminated: ok {rc=0}
18:42:17.289354 bus                          /gobi_0: Setting Powered False
18:42:18.393158 bus                          /gobi_0: Setting Powered False
18:42:19.504831 bus                          /gobi_6: Setting Powered False
