
----------------------------------------------
trial-2380 gprs:trx-b200+mod-bts0-dynts-osmo ping.py
----------------------------------------------
18:07:37.702196 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
18:07:37.714478 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1)
18:07:37.879496 tst                          ping.py: using LAC 30563
18:07:38.005841 tst                          ping.py: using RAC 218
18:07:38.133484 tst                          ping.py: using CellId 30563
18:07:38.259845 tst                          ping.py: using BVCI 30564
18:07:38.286362 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
18:07:38.298003 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
18:07:38.309320 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
18:07:38.321112 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
18:07:38.332360 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
18:07:38.343999 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
18:07:38.355473 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
18:07:38.366775 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4)
18:07:38.661486 tst                       ping.py:19: start network...
18:07:38.795043 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
18:07:39.310592 run         create_hlr_db(pid=10476): Launched
18:07:39.497655 bus                          /gobi_6: Setting Powered False
18:07:40.519184 run         create_hlr_db(pid=10476): Terminated: ok {rc=0}
18:07:40.927858 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10478): Launched
18:07:41.232765 run   osmo-hlr_10.42.42.2(pid=10479): Launched
18:07:41.344366 run              osmo-stp_10.42.42.5: Starting osmo-stp
18:07:41.877494 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10481): Launched
18:07:42.183003 run   osmo-stp_10.42.42.5(pid=10482): Launched
18:07:42.292854 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
18:07:42.820308 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10484): Launched
18:07:42.927452 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
18:07:43.191039 run              patchelf(pid=10485): Launched
18:07:43.367037 run   osmo-stp_10.42.42.5(pid=10482): ERR: Terminated: ERROR {rc=1}  [trial-2380↪gprs:trx-b200+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10482)]
18:07:43.495628 run   osmo-stp_10.42.42.5(pid=10482): stdout: 
| (launched: 2022-12-12_18:07:42.030519)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
18:07:43.625346 run   osmo-stp_10.42.42.5(pid=10482): stderr: 
| [0;m[38;5;43m20221212180742198 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221212180742199 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221212180742199 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221212180742199 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212180742200 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212180742200 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212180742200 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
18:07:43.749667 run   osmo-stp_10.42.42.5(pid=10482): stdout: 
| (launched: 2022-12-12_18:07:42.030519)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
18:07:43.872741 run   osmo-stp_10.42.42.5(pid=10482): stderr: 
| [0;m[38;5;43m20221212180742198 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221212180742199 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221212180742199 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221212180742199 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212180742200 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212180742200 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212180742200 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
18:07:44.016224 run              patchelf(pid=10485): Terminating (SIGINT)
18:07:44.184870 run              patchelf(pid=10485): Terminated: ok {rc=0}
18:07:44.215676 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=10482): Process ended prematurely: osmo-stp_10.42.42.5(pid=10482) [trial-2380↪gprs:trx-b200+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10482)]  [trial-2380↪gprs:trx-b200+mod-bts0-dynts-osmo↪ping.py:22]
18:07:44.224434 tst                       ping.py:22: Test FAILED (6.5 sec)
18:07:44.285213 run   osmo-hlr_10.42.42.2(pid=10479): ERR: Terminated: ERROR {rc=237}  [trial-2380↪gprs:trx-b200+mod-bts0-dynts-osmo↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10479)]
18:07:44.333902 run   osmo-hlr_10.42.42.2(pid=10479): stdout: 
| (launched: 2022-12-12_18:07:41.080556) 
18:07:44.383562 run   osmo-hlr_10.42.42.2(pid=10479): stderr: 
| [0;m[1;31m20221212180741256 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221212180741256 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221212180741256 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221212180741256 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221212180741256 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221212180741256 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221212180741268 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2380/run.2022-12-12_17-41-28/gprs:trx-b200+mod-bts0-dynts-osmo/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221212180741276 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221212180741276 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221212180741276 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
18:07:44.426044 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10478): Terminating (SIGTERM)
18:07:44.465999 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10481): Terminating (SIGTERM)
18:07:44.505962 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10484): Terminating (SIGTERM)
18:07:44.515282 ---      ParallelTerminationStrategy: PID 10478 died...
18:07:44.569063 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10478): Terminated: ok {rc=0}
18:07:44.579244 ---      ParallelTerminationStrategy: PID 10481 died...
18:07:44.632454 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10481): Terminated: ok {rc=0}
18:07:44.642188 ---      ParallelTerminationStrategy: PID 10484 died...
18:07:44.695357 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10484): Terminated: ok {rc=0}
18:07:44.778630 bus                          /gobi_6: Setting Powered False
