
----------------------------------------------
trial-2381 gprs:nanobts+band-900 iperf3m4.py
----------------------------------------------
20:19:10.756550 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
20:19:10.768392 tst            gprs:nanobts+band-900: Using 1 x bts (candidates: 1)
20:19:10.905128 tst                      iperf3m4.py: using LAC 31259
20:19:11.023193 tst                      iperf3m4.py: using RAC 149
20:19:11.143181 tst                      iperf3m4.py: using CellId 31259
20:19:11.262858 tst                      iperf3m4.py: using BVCI 31260
20:19:11.285937 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
20:19:11.296499 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
20:19:11.307067 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
20:19:11.317564 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
20:19:11.327907 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
20:19:11.338468 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
20:19:11.349117 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
20:19:11.359462 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
20:19:11.370053 tst            gprs:nanobts+band-900: Using 1 x modem (candidates: 4)
20:19:11.487702 tst            gprs:nanobts+band-900: Using 1 x modem (candidates: 4)
20:19:11.609630 tst            gprs:nanobts+band-900: Using 1 x modem (candidates: 4)
20:19:11.726664 tst            gprs:nanobts+band-900: Using 1 x modem (candidates: 4)
20:19:12.024896 tst                    iperf3m4.py:8: start iperfv3 server 10.42.42.10:5003...
20:19:12.161658 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
20:19:12.501512 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23488): Launched
20:19:12.782535 run iperf3-srv_10.42.42.10(pid=23489): Launched
20:19:12.982618 tst                    iperf3m4.py:8: start iperfv3 server 10.42.42.10:5004...
20:19:13.118518 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
20:19:13.458316 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23490): Launched
20:19:13.740416 run iperf3-srv_10.42.42.10(pid=23491): Launched
20:19:13.940134 tst                    iperf3m4.py:8: start iperfv3 server 10.42.42.10:5005...
20:19:14.076286 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
20:19:14.416048 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23492): Launched
20:19:14.697292 run iperf3-srv_10.42.42.10(pid=23493): Launched
20:19:14.896533 tst                    iperf3m4.py:8: start iperfv3 server 10.42.42.10:5006...
20:19:15.031959 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
20:19:15.370669 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23494): Launched
20:19:15.652893 run iperf3-srv_10.42.42.10(pid=23495): Launched
20:19:15.860129 tst                    iperf3m4.py:8: start network...
20:19:15.993981 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
20:19:16.534423 run         create_hlr_db(pid=23496): Launched
20:19:16.716891 bus                          /gobi_6: Setting Powered False
20:19:17.731192 run         create_hlr_db(pid=23496): Terminated: ok {rc=0}
20:19:18.171254 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23498): Launched
20:19:18.499974 run   osmo-hlr_10.42.42.2(pid=23499): Launched
20:19:18.617897 run              osmo-stp_10.42.42.5: Starting osmo-stp
20:19:19.190089 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23501): Launched
20:19:19.516453 run   osmo-stp_10.42.42.5(pid=23502): Launched
20:19:19.635071 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
20:19:20.206711 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23504): Launched
20:19:20.323402 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
20:19:20.610732 run              patchelf(pid=23505): Launched
20:19:20.802304 run   osmo-stp_10.42.42.5(pid=23502): ERR: Terminated: ERROR {rc=1}  [trial-2381↪gprs:nanobts+band-900↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23502)]
20:19:20.943370 run   osmo-stp_10.42.42.5(pid=23502): stdout: 
| (launched: 2022-12-12_20:19:19.355499)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
20:19:21.084034 run   osmo-stp_10.42.42.5(pid=23502): stderr: 
| [0;m[38;5;43m20221212201919545 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221212201919545 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221212201919545 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221212201919546 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212201919546 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212201919546 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212201919546 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
20:19:21.219846 run   osmo-stp_10.42.42.5(pid=23502): stdout: 
| (launched: 2022-12-12_20:19:19.355499)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
20:19:21.354527 run   osmo-stp_10.42.42.5(pid=23502): stderr: 
| [0;m[38;5;43m20221212201919545 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221212201919545 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221212201919545 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221212201919546 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212201919546 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212201919546 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212201919546 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
20:19:21.510909 run              patchelf(pid=23505): Terminating (SIGINT)
20:19:21.695094 run              patchelf(pid=23505): Terminated: ok {rc=0}
20:19:21.728733 tst                    iperf3m4.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=23502): Process ended prematurely: osmo-stp_10.42.42.5(pid=23502) [trial-2381↪gprs:nanobts+band-900↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23502)]  [trial-2381↪gprs:nanobts+band-900↪iperf3m4.py:8]
20:19:21.738703 tst                    iperf3m4.py:8: Test FAILED (11.0 sec)
20:19:21.803725 run   osmo-hlr_10.42.42.2(pid=23499): ERR: Terminated: ERROR {rc=237}  [trial-2381↪gprs:nanobts+band-900↪iperf3m4.py↪iperf3m4.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=23499)]
20:19:21.856337 run   osmo-hlr_10.42.42.2(pid=23499): stdout: 
| (launched: 2022-12-12_20:19:18.337796) 
20:19:21.909667 run   osmo-hlr_10.42.42.2(pid=23499): stderr: 
| [0;m[1;31m20221212201918532 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221212201918532 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221212201918532 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221212201918532 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221212201918532 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221212201918533 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221212201918544 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2381/run.2022-12-12_19-09-05/gprs:nanobts+band-900/iperf3m4.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221212201918553 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221212201918553 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221212201918554 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
20:19:21.954390 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23488): Terminating (SIGTERM)
20:19:21.997508 run iperf3-srv_10.42.42.10(pid=23489): Terminating (SIGTERM)
20:19:22.039865 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23490): Terminating (SIGTERM)
20:19:22.082504 run iperf3-srv_10.42.42.10(pid=23491): Terminating (SIGTERM)
20:19:22.125207 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23492): Terminating (SIGTERM)
20:19:22.167617 run iperf3-srv_10.42.42.10(pid=23493): Terminating (SIGTERM)
20:19:22.210525 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23494): Terminating (SIGTERM)
20:19:22.253406 run iperf3-srv_10.42.42.10(pid=23495): Terminating (SIGTERM)
20:19:22.295808 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23498): Terminating (SIGTERM)
20:19:22.338580 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23501): Terminating (SIGTERM)
20:19:22.381291 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23504): Terminating (SIGTERM)
20:19:22.391440 ---      ParallelTerminationStrategy: PID 23488 died...
20:19:22.448760 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23488): Terminated: ok {rc=0}
20:19:22.459137 ---      ParallelTerminationStrategy: PID 23489 died...
20:19:22.516057 run iperf3-srv_10.42.42.10(pid=23489): Terminated {rc=256}
20:19:22.526322 ---      ParallelTerminationStrategy: PID 23490 died...
20:19:22.583174 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23490): Terminated: ok {rc=0}
20:19:22.593462 ---      ParallelTerminationStrategy: PID 23491 died...
20:19:22.649854 run iperf3-srv_10.42.42.10(pid=23491): Terminated {rc=256}
20:19:22.660375 ---      ParallelTerminationStrategy: PID 23492 died...
20:19:22.717339 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23492): Terminated: ok {rc=0}
20:19:22.727644 ---      ParallelTerminationStrategy: PID 23493 died...
20:19:22.784290 run iperf3-srv_10.42.42.10(pid=23493): Terminated {rc=256}
20:19:22.794531 ---      ParallelTerminationStrategy: PID 23494 died...
20:19:22.851548 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23494): Terminated: ok {rc=0}
20:19:22.862309 ---      ParallelTerminationStrategy: PID 23495 died...
20:19:22.918872 run iperf3-srv_10.42.42.10(pid=23495): Terminated {rc=256}
20:19:22.929511 ---      ParallelTerminationStrategy: PID 23498 died...
20:19:22.986321 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23498): Terminated: ok {rc=0}
20:19:22.996660 ---      ParallelTerminationStrategy: PID 23501 died...
20:19:23.053601 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23501): Terminated: ok {rc=0}
20:19:23.063892 ---      ParallelTerminationStrategy: PID 23504 died...
20:19:23.120734 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23504): Terminated: ok {rc=0}
20:19:23.209110 bus                          /gobi_4: Setting Powered False
20:19:24.318296 bus                          /gobi_4: Setting Powered False
20:19:25.427903 bus                          /gobi_1: Setting Powered False
20:19:26.535313 bus                          /gobi_1: Setting Powered False
20:19:27.649346 bus                          /gobi_0: Setting Powered False
20:19:28.753392 bus                          /gobi_0: Setting Powered False
20:19:29.863463 bus                          /gobi_6: Setting Powered False
