
----------------------------------------------
trial-2382 gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo cs_paging_gprs_active.py
----------------------------------------------
21:37:28.341984 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
21:37:28.353133 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1)
21:37:28.506713 tst         cs_paging_gprs_active.py: using LAC 31662
21:37:28.629231 tst         cs_paging_gprs_active.py: using RAC 42
21:37:28.751030 tst         cs_paging_gprs_active.py: using CellId 31662
21:37:28.875440 tst         cs_paging_gprs_active.py: using BVCI 31663
21:37:28.898905 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
21:37:28.910087 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
21:37:28.920916 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
21:37:28.931828 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
21:37:28.942822 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
21:37:28.953835 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
21:37:28.964857 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
21:37:28.975651 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
21:37:28.986760 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4)
21:37:29.108616 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4)
21:37:29.410302 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003...
21:37:29.549616 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
21:37:29.888172 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30651): Launched
21:37:30.169778 run iperf3-srv_10.42.42.10(pid=30652): Launched
21:37:30.371716 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004...
21:37:30.510574 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
21:37:30.854237 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30653): Launched
21:37:31.164539 run iperf3-srv_10.42.42.10(pid=30654): Launched
21:37:31.376242 tst      cs_paging_gprs_active.py:38: start network...
21:37:31.538363 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
21:37:32.099547 run         create_hlr_db(pid=30655): Launched
21:37:32.291888 bus                          /gobi_6: Setting Powered False
21:37:33.312060 run         create_hlr_db(pid=30655): Terminated: ok {rc=0}
21:37:33.746468 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30657): Launched
21:37:34.075343 run   osmo-hlr_10.42.42.2(pid=30658): Launched
21:37:34.198948 run              osmo-stp_10.42.42.5: Starting osmo-stp
21:37:34.767567 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30660): Launched
21:37:35.094962 run   osmo-stp_10.42.42.5(pid=30661): Launched
21:37:35.215223 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
21:37:35.788484 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30663): Launched
21:37:35.906693 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
21:37:36.199848 run              patchelf(pid=30664): Launched
21:37:36.392205 run   osmo-stp_10.42.42.5(pid=30661): ERR: Terminated: ERROR {rc=1}  [trial-2382↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30661)]
21:37:36.533501 run   osmo-stp_10.42.42.5(pid=30661): stdout: 
| (launched: 2022-12-12_21:37:34.934025)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
21:37:36.674678 run   osmo-stp_10.42.42.5(pid=30661): stderr: 
| [0;m[38;5;43m20221212213735127 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221212213735127 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221212213735128 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221212213735128 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212213735128 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212213735129 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212213735129 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
21:37:36.811067 run   osmo-stp_10.42.42.5(pid=30661): stdout: 
| (launched: 2022-12-12_21:37:34.934025)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
21:37:36.946285 run   osmo-stp_10.42.42.5(pid=30661): stderr: 
| [0;m[38;5;43m20221212213735127 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221212213735127 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221212213735128 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221212213735128 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212213735128 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212213735129 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212213735129 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
21:37:37.104290 run              patchelf(pid=30664): Terminating (SIGINT)
21:37:37.289728 run              patchelf(pid=30664): Terminated: ok {rc=0}
21:37:37.323772 tst      cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=30661): Process ended prematurely: osmo-stp_10.42.42.5(pid=30661) [trial-2382↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30661)]  [trial-2382↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38]
21:37:37.333810 tst      cs_paging_gprs_active.py:38: Test FAILED (9.0 sec)
21:37:37.397895 run   osmo-hlr_10.42.42.2(pid=30658): ERR: Terminated: ERROR {rc=237}  [trial-2382↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=30658)]
21:37:37.448194 run   osmo-hlr_10.42.42.2(pid=30658): stdout: 
| (launched: 2022-12-12_21:37:33.913845) 
21:37:37.499540 run   osmo-hlr_10.42.42.2(pid=30658): stderr: 
| [0;m[1;31m20221212213734117 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221212213734117 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221212213734117 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221212213734117 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221212213734117 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221212213734117 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221212213734129 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2382/run.2022-12-12_20-36-34/gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221212213734137 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221212213734137 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221212213734137 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
21:37:37.542453 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30651): Terminating (SIGTERM)
21:37:37.583237 run iperf3-srv_10.42.42.10(pid=30652): Terminating (SIGTERM)
21:37:37.624351 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30653): Terminating (SIGTERM)
21:37:37.665270 run iperf3-srv_10.42.42.10(pid=30654): Terminating (SIGTERM)
21:37:37.705976 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30657): Terminating (SIGTERM)
21:37:37.746738 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30660): Terminating (SIGTERM)
21:37:37.787454 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30663): Terminating (SIGTERM)
21:37:37.796865 ---      ParallelTerminationStrategy: PID 30651 died...
21:37:37.850900 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30651): Terminated: ok {rc=0}
21:37:37.860772 ---      ParallelTerminationStrategy: PID 30652 died...
21:37:37.914369 run iperf3-srv_10.42.42.10(pid=30652): Terminated {rc=256}
21:37:37.924011 ---      ParallelTerminationStrategy: PID 30653 died...
21:37:37.978032 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30653): Terminated: ok {rc=0}
21:37:37.987828 ---      ParallelTerminationStrategy: PID 30654 died...
21:37:38.041454 run iperf3-srv_10.42.42.10(pid=30654): Terminated {rc=256}
21:37:38.051246 ---      ParallelTerminationStrategy: PID 30657 died...
21:37:38.105642 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30657): Terminated: ok {rc=0}
21:37:38.115646 ---      ParallelTerminationStrategy: PID 30660 died...
21:37:38.170014 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30660): Terminated: ok {rc=0}
21:37:38.179701 ---      ParallelTerminationStrategy: PID 30663 died...
21:37:38.233263 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30663): Terminated: ok {rc=0}
21:37:38.322817 bus                          /gobi_0: Setting Powered False
21:37:39.427766 bus                          /gobi_0: Setting Powered False
21:37:40.535757 bus                          /gobi_6: Setting Powered False
