
----------------------------------------------
trial-2383 gprs:nanobts+band-1900+mod-bts0-egprs ping_idle_ping.py
----------------------------------------------
23:11:15.231027 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
23:11:15.243146 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x bts (candidates: 1)
23:11:15.379490 tst                ping_idle_ping.py: using LAC 32155
23:11:15.504627 tst                ping_idle_ping.py: using RAC 25
23:11:15.626286 tst                ping_idle_ping.py: using CellId 32155
23:11:15.746465 tst                ping_idle_ping.py: using BVCI 32156
23:11:15.769882 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
23:11:15.780742 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
23:11:15.791550 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
23:11:15.802634 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
23:11:15.814101 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
23:11:15.825141 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
23:11:15.845394 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
23:11:15.858069 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x modem (candidates: 4)
23:11:16.192799 tst             ping_idle_ping.py:24: start network...
23:11:16.332783 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
23:11:16.907294 run          create_hlr_db(pid=6964): Launched
23:11:17.099233 bus                          /gobi_6: Setting Powered False
23:11:18.114621 run          create_hlr_db(pid=6964): Terminated: ok {rc=0}
23:11:18.522294 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6966): Launched
23:11:18.824320 run    osmo-hlr_10.42.42.2(pid=6967): Launched
23:11:18.941625 run              osmo-stp_10.42.42.5: Starting osmo-stp
23:11:19.475160 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6969): Launched
23:11:19.777747 run    osmo-stp_10.42.42.5(pid=6970): Launched
23:11:19.887510 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
23:11:20.414304 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6972): Launched
23:11:20.521564 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
23:11:20.785850 run               patchelf(pid=6973): Launched
23:11:20.963355 run    osmo-stp_10.42.42.5(pid=6970): ERR: Terminated: ERROR {rc=1}  [trial-2383↪gprs:nanobts+band-1900+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6970)]
23:11:21.092931 run    osmo-stp_10.42.42.5(pid=6970): stdout: 
| (launched: 2022-12-12_23:11:19.628816)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
23:11:21.222843 run    osmo-stp_10.42.42.5(pid=6970): stderr: 
| [0;m[38;5;43m20221212231119799 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221212231119799 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221212231119800 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221212231119800 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212231119801 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212231119801 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212231119801 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
23:11:21.347580 run    osmo-stp_10.42.42.5(pid=6970): stdout: 
| (launched: 2022-12-12_23:11:19.628816)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
23:11:21.471454 run    osmo-stp_10.42.42.5(pid=6970): stderr: 
| [0;m[38;5;43m20221212231119799 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221212231119799 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221212231119800 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221212231119800 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212231119801 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212231119801 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212231119801 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
23:11:21.617168 run               patchelf(pid=6973): Terminating (SIGINT)
23:11:21.788439 run               patchelf(pid=6973): Terminated: ok {rc=0}
23:11:21.819428 tst             ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=6970): Process ended prematurely: osmo-stp_10.42.42.5(pid=6970) [trial-2383↪gprs:nanobts+band-1900+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6970)]  [trial-2383↪gprs:nanobts+band-1900+mod-bts0-egprs↪ping_idle_ping.py:27]
23:11:21.827879 tst             ping_idle_ping.py:27: Test FAILED (6.6 sec)
23:11:21.887540 run    osmo-hlr_10.42.42.2(pid=6967): ERR: Terminated: ERROR {rc=237}  [trial-2383↪gprs:nanobts+band-1900+mod-bts0-egprs↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=6967)]
23:11:21.936577 run    osmo-hlr_10.42.42.2(pid=6967): stdout: 
| (launched: 2022-12-12_23:11:18.675221) 
23:11:21.985817 run    osmo-hlr_10.42.42.2(pid=6967): stderr: 
| [0;m[1;31m20221212231118853 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221212231118853 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221212231118853 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221212231118853 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221212231118853 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221212231118853 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221212231118866 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2383/run.2022-12-12_22-05-43/gprs:nanobts+band-1900+mod-bts0-egprs/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221212231118874 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221212231118875 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221212231118875 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
23:11:22.027783 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6966): Terminating (SIGTERM)
23:11:22.067324 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6969): Terminating (SIGTERM)
23:11:22.106906 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6972): Terminating (SIGTERM)
23:11:22.116365 ---      ParallelTerminationStrategy: PID 6966 died...
23:11:22.169774 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6966): Terminated: ok {rc=0}
23:11:22.179422 ---      ParallelTerminationStrategy: PID 6969 died...
23:11:22.232095 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6969): Terminated: ok {rc=0}
23:11:22.241874 ---      ParallelTerminationStrategy: PID 6972 died...
23:11:22.294328 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6972): Terminated: ok {rc=0}
23:11:22.377468 bus                          /gobi_6: Setting Powered False
